610 likes | 764 Views
PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011. Huzairy Hassan School of Bioprocess Engineering UniMAP. Material Equilibrium. Introduction. Material equilibrium: In each phase of the closed system , the number of moles of each substance present remains constant in time.
E N D
PHYSICAL CHEMISTRYERT 108Semester II 2010/2011 Huzairy Hassan School of Bioprocess Engineering UniMAP
Introduction • Material equilibrium: • In each phase of the closed system, the number of moles of each substance present remains constant in time. Phase equilibrium: Is equilibrium with respect to transport of matter between phases of the system without conversion of 1 species to another. Reaction equilibrium: Is equilibrium with respect to conversion of 1 set of chemical species to another set.
Phase equilibrium: - involves the same chemical species present in different phases - Ex: C6H12O6(s) ↔ C6H12O6(aq) Reaction Equilibrium: • Involves different chemical species, which may or may not be present in the same phase. - Ex: CaCO3 (s) CaO (s) + CO2 (g) N2 (g) + 3H2 (g) 2NH3 (g)
Thermodynamic Properties of Non-equilibrium Systems Overview: Deals with systems (non-thermodynamical equilibrium) in which a chemical rxn or transport of matter from 1 phase to another is occurring.
1st consider systems not in phase equilibrium: Figure 4.1 When the partition is removed, the system is not in phase equilibrium Initially, P and T are held fixed, then the U and S: U = Usoln + UNaCl S = Ssoln + SNaCl
Now, the partition is removed: - the removal is done reversibly and adiabatically, - q and w for the partition removal are zero, - therefore, ΔU and ΔS are zero. After the partition is removed no phase equilibrium - as the crystals (solids) of NaCl start to dissolve in the unsaturated solution values for U and S are changing.
2nd consider systems not in reaction equilibrium: Suppose H2, O2, and H2O gases are mixed. Provided no catalyst is present and the T is moderate the gases will not react when mixed. -- 1) we can use First Law to measure the ΔU of the mixing (ΔU = q + w), -- 2) by using semi-permeable membranes, can do the mixing reversibly and hence measure the ΔS for the mixing process. However, the mixture is not necessarily at reaction equilibrium. Then, add catalyst, the gases react – changing the mixture composition. We stop the reaction by catalyst removal – we get new composition of mixture. --- U & S can be determined by measurement done in a reversible separation process.
Therefore; Values of U and S can be assigned to a system that is in mechanical and thermal equilibrium and has a uniform composition in each phase, even though the system is not in material equilibrium. -- such systems also have well-defined values of P, V, & T
Entropy & Equilibrium Overview: Consider an isolated system that is not at material equilibrium; - the spontaneous chemical rxn or transport of matter between phases in this system are irreversible processes that increase the entropy (S). - the processes continue until the S is maximized once the S is maximized, further processes can only decrease S, thus violate 2nd Law. criteria for equilibrium in an isolated system is the maximization of the system’s entropy S.
Closed system (in material equilibrium); - not isolated - can exchange heat and work with its surroundings. By considering the system itself plus the surroundings with which it interacts to constitute an isolated system; - then, the condition for material equilibrium in the system is maximization of the total entropy of the system plus its surroundings: Ssyst + Ssurra max at equilibrium
Reaction equilibrium: • Rxn that involve gases – e.g.: chemicals put in container of fixed volume, and the system is allowed to reach equilibrium at constant T and V in a constant-T bath. 2) Rxn in liquid solutions – e.g.: the system is usually held at atmospheric P and allowed to reach equilibrium at constant T and P.
The system and surroundings are isolated from the rest of the world Surroundings at T Figure 4.2 A closed system that is in mechanical and thermal equilibrium but not in material equilibrium. System at T Impermeable wall Rigid, adiabatic, impermeable wall • The system: not in material equilibrium, but is in mechanical and • thermal equilibrium • The surroundings: are in material, mechanical and thermal equilibrium.
Let heat dqsyst flow into the system as a result of the changes that occur in the system during an infinitesimal time period. For ex; Endothermic chemical rxn: dqsyst is +ve. dqsurr = - dqsyst since system and surrounding are isolated from the rest of the world dSuniv = dSsyst + dSsurr > 0 since the chemical rxn or matter transport within nonequilibrium system is irreversible dSsurr = dqsurr / T the surroundings are in thermodynamic equilibrium – heat transfer is reversible However, the system is not thermodynamic equilibrium irreversible change in system dSsyst ≠ dqsyst / T dS > dqirrev / T thus, at material equilibrium dS = dqrev/ T (4.7) and dS ≥ dq/T
For the 1st law for a closed system is; dq = dU – dw Multiply with T, dq ≤ T dS • dU – dw ≤ T dS or • dU ≤ T dS + dw (4.9)
GIBBS & HELMHOLTZ Energies Material equilibrium in a system held at constant T and V (dV = 0, dT= 0) Now, add and subtract S dT: since
Since dw = - P dV State function
The condition for material equilibrium in a closed system capable of doing only P-V work and held constant T and V is minimization of the system’s state function U – TS A = Helmholtz free energy or (Helmholtz free energy or Helmholtz function) (unit= J or cal)
At constant T and P (capable doing only P-V work); • Add and substract S dT and V dP: State function
In a closed system (P-V work), the constant T and V material-equilibrium condition is the minimization of the Helmholtz function A, and the constant T and P material-equilibrium condition is the minimization of the Gibbs function G In summary
Example 4.1 Calculate ΔG and ΔA for the vaporization of 1.00 mol of H2O at 1.00 atm and 100 °C.
Solution: G ≡ H –TS, T is constant and ΔG = G2 – G1 = H2 –TS2 – (H1 – TS1) = H2 – H1 – T(S2 – S1) = ΔH - TΔS , constant T The process is reversible and isothermal; d S = d q/T ΔS = q/T Since P is constant and only P-V work is done; ΔH = qP = q Therefore, ΔG = q – T(q/T) = 0 since reversible (equilibrium) process at constant T and P
From A ≡ U – TS, ΔA = ΔU -T ΔSat constant T. From ΔU = q + w, and ΔS = q/T ΔA = q + w – q = w ----- (1) The work is reversible P-V work at constant P, so; w = ---- (2) Given, molar volume of H2O (l) at 100 ºC = 18.8 cm3 /mol, Therefore, from ideal-gas law Vm = RT/P = 30.6 x 103 cm3 /mol • ΔV = 30.6 x 103 cm3 From (2), w = (- 30.6 x 103 cm3 atm) (8.314 J) / (82.06 cm3 atm) = - 3.10 kJ = ΔA - (from (1))
The decrease in Gsyst as the system proceeds to equilibrium at constant T and P corresponds to a proportional increase in Suniv. The occurrence of rxn is favored by +ve ΔSsystand+ve ΔSsurr -ve ΔHsyst(exothermic rxn) since, the heat transfered to the surroundings increases entropy (ΔSsurr = - ΔHsyst /T)
“Work function” - for a closed system in thermal and mechanical equilibrium dA ≤ -S dT + dw, for constant T, dA ≤ dw, for finite isothermal process, ΔA ≤ w work done by the system on its surroundings; wby = -w, and ΔA ≤ -wby for an isothermal process. therefore, wby≤ - ΔA, constant T, closed system ----- (4.22) - (1) the equality sign holds for the reversible process (2) wby can be greater or less than – ΔU (int. energy decrease of syst) (3) wby = – ΔU + q (recall Carnot cycle, ΔU = 0 and wby > 0)
G From G = A + PV dG = dA + P dV + V dP From d(U – TS) ≤ -S dT + dw, for dA gives; dG ≤ -S dT + dw + P dV + P dV, for closed syst. in thermal and mechanical equilibrium. • dG ≤ dw + P dV, constantT and P, closed system ---- (4.23) If P-V work is done
If P-V work is done in mechanically reversible ; dw = - P dV + dwnon-P-V Eq. (4.23) becomes dG ≤ dwnon-P-V or ΔG ≤ wnon-P-V = -wby,non-P-V Therefore, wby,non-P-V ≤ -ΔG • The quantity – ΔG equals the max. possible non-expansion work output wby,non-P-V done by a system in a constant-T-and-P process – “free energy” “Ex. of non-expansion work in biological systems are the work of contracting muscles and of transmitting nerve impulses.”
When a closed system capable of only P-V work is held at constant T and V, the condition for material equilibrium (phase & reaction) is that the Helmholtz function A (A ≡ U – TS) is minimized. When such a system is held at constant T and P, the material-equilibrium condition is the minimization of the Gibbs function G ≡ H – TS. In summary
Thermodynamic Relations for a System in Equilibrium Overview: Investigation of the properties of A and G ---- Reversible process through equilibrium state.
Basic Equation: • dU = T dS – P dV, closed syst, reversible, P-V work • H ≡ U + PV • A ≡ U - TS • G ≡ H – TS • CV = , closed syst, in equilibrium, P-V work • CP = , closed syst, in equilibrium, P-V work
In term of S; CV = T and, CP = T , closed syst. In equilibrium Therefore, we can find the rates of change of U, H, and S with respect to Temperature. dU = T dS – P dV • does not apply to irreversible composition changes (ex.: by adding or removing 1 or more substance in a mixture, or chemical rxn or transport of phase from 1 to another) in a closed system. • Can apply to reversible composition changes (ex.: mixture of N2, H2 & NH3 with catalyst and reversibly vary T or P).
Relation between Cp, α(thermal expansivity or cubic expansion coefficient), and κ (isothermal compressibility - kappa) =
Dependence of State Functions on T, P, and V: • Volume Dependence of U 2) Temperature Dependence of U 3) Temperature Dependence of H
4) Pressure Dependence of H 5) Temperature Dependence of S
6) Pressure Dependence of S 7) Temperature and Pressure Dependences of G
Example 4.2 (CP -CV) For water at 30 ºC and 1 atm: α = 3.04 x 10-4 K-1 κ = 4.52 x 10-5 atm-1 = 4.46 x 10-10 m2 /N, CP,m = 17.99 cal/(mol K), Vm = 18.1 cm3 /mol Find CV,m of water at 30 ºC and 1 atm.
Assignment 1 For water at 95.0 ºC and 1 atm: α = 7.232 x 10-4 K-1 κ = 4.81x 10-5 bar-1 CP = 4.210 J/(g K) and ρ = 0.96189 g/cm3 . Find CV for water at 95.0 ºC and 1 atm. Submission: 2 March 2011
Calculation of Changes in State Functions • Calculation of ΔS - The system’s entropy is a function of Tand P; S = S (T, P) dS = dT + dP = dT – αV dP ΔS = S2 – S1 = dT - ----- (4.60)
a) T is held constant at T2, P is changed from P1 to P2 dP = 0; Eq. 4.60 becomes ΔSa= dT, constant P = P1 ---- (4.61) b) P is held constant, CP in Eq. (4.61) depends only on T dT = 0; Eq. 4.60 becomes ΔSb= - , constant T = T2 ---- (4.62) ΔS = ΔSa + ΔSb
Example 4.4 ΔS when both T and P change Calculate ΔS when 2.00 mol of water goes from 27 ºC and 1 atm to 37 ºC and 40 atm. Given; CP,m = 17.99 cal/(mol K), Vm = 18.1 cm3 /mol α = 3.04 x 10-4 K-1
2) Calculation of ΔH and ΔU ΔH = + Figure 4.5 Path for calculating ΔS or ΔH