100 likes | 275 Views
EUROPEAN COMMISSION DG TREN – E3. MEETING OF THE COMMITTEE ON TRANSPORT OF DANGEROUS GOODS 1 APRIL 2004 POINT 7 FUTURE NEEDS TO AMEND COUNCIL DIRECTIVE 1999/36/EC ON TRANSPORTABLE PRESSURE EQUIPMENT (TPED) FERNANDO FERREIRA. EUROPEAN COMMISSION DG TREN – E3.
E N D
EUROPEAN COMMISSIONDG TREN – E3 MEETING OF THE COMMITTEE ON TRANSPORT OF DANGEROUS GOODS 1 APRIL 2004 POINT 7 FUTURE NEEDS TO AMEND COUNCIL DIRECTIVE 1999/36/EC ON TRANSPORTABLE PRESSURE EQUIPMENT (TPED) FERNANDO FERREIRA
EUROPEAN COMMISSIONDG TREN – E3 FUTURE NEEDS TO AMEND COUNCIL DIRECTIVE 1999/36/EC ON TRANSPORTABLE PRESSURE EQUIPMENT (TPED) 1. CLARIFICATION AND ADDITIONAL REQUIREMENTS ON TPED 2. INTEGRATION OF AEROSOL DISPENSERS IN THE SCOPE OF TPED
EUROPEAN COMMISSIONDG TREN – E3 1. CLARIFICATION AND ADDITIONAL REQUIREMENTS ON TPED A) DEFINITION OF TRANSPORTABLE PRESSURE EQUIPMENT B) TIME LIMIT FOR THE REASSESSMENT OF CONFORMITY C) CE MARKING ON VALVES AND OTHER ACCESSORIES
EUROPEAN COMMISSIONDG TREN – E3 A) DEFINITION OF TRANSPORTABLE PRESSURE EQUIPMENT • The receptacles list in brackets in Article 2(1) is considered as non-exhaustive by the Legal Service • To avoid future misinterpretations, we propose to add “such as” in the beginning of the list and “gas cartridges” and “MEGC” to the list
EUROPEAN COMMISSIONDG TREN – E3 B) TIME LIMIT FOR THE REASSESSMENT OF CONFORMITY • A long delay will make difficult the reassessment of conformity of existing equipment • To restring the reassessment of conformity application, we propose to add Article 5(1) with “…which shall perform it within (twice) the time defined for the periodicity of the inspection of the equipment…”
EUROPEAN COMMISSIONDG TREN – E3 C) CE MARKING ON VALVES AND OTHER ACCESSORIES (1) • Clarification is requested on several issues: • Π or CE mark, when the assessment is made according the requirements of PED? • Which notified body, qualified according TPED or PED, is competent? • CE marking on valves of transportable pressure equipment is in conflict with Art. 3(3) of PED? • Is the double marking possible on valves intended to be used on both equipment?
EUROPEAN COMMISSIONDG TREN – E3 C) CE MARKING ON VALVES AND OTHER ACCESSORIES (2) • We propose that questions I, II and III are clarified with a new paragraph to Art. 3: “5. These valves and accessories shall bear the CE mark including those assessed in conformity with Art. 3(3) of PED, following the conformity assessment provided by a notified body, which was qualified according the same Directive.”
EUROPEAN COMMISSIONDG TREN – E3 C) CE MARKING ON VALVES AND OTHER ACCESSORIES (3) • The proposition for clarification of question IV is an extension to Art. 10(2): “ …or they shall bear both marks if the conformity assessment is performed according the procedure laid down in Art. 3(3) of this directive and in Art. 10 of PED.”
EUROPEAN COMMISSIONDG TREN – E3 2. INTEGRATION OF AEROSOL DISPENSERS IN THE SCOPE OF TPED • Actually aerosol dispensers are covered by Directive 75/324/EEC • DG ENTR – G4 considers options to revise the aerosols Directive • Aerosol dispensers and gas cartridges are covered by the same general requirements in ADR and RID
EUROPEAN COMMISSIONDG TREN – E3 THANK YOU FOR YOUR ATTENTION!