1 / 16

Reactive Power and Voltage Control Problems

Reactive Power and Voltage Control Problems

jozzer
Download Presentation

Reactive Power and Voltage Control Problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reactive Power and Voltage Control Problems Julio César Chinchilla Guarín 223141 Analysis of PowerSystems Universidad Nacional de Colombia

  2. Agenda • Introduction. • EquivalentCircuit. • ThéveninEquivalentCircuit. • EquivalentCircuit of a TappedTransformer. • SomeConfigurations of AutomaticTap-Changers in PowerSystems. • Voltage Control of a Radial Load (Case I). • Tie-TransformerBetweenSystems of VariousStrengths (Case II). • TwoVeryStrongSystems. • TwoVeryWeakSystems. • OneVeryStrong and OneVeryWeakSystem. • Conclusions. • References.

  3. Introduction

  4. ThéveninEquivalentCircuit • EquivalentCircuit of a TappedTransformer • EquivalentCircuit Table 1. Effect of ‘n’ on Y1 and Y2. Y1=n(n-1)Y Y2=(1-n)Y

  5. SomeConfigurations of AutomaticTap-Changers in PowerSystems

  6. Case I – Voltage control of a radial load

  7. Case I – Voltagecontrol of a radial load Y1=n(n-1)Y Y2=(1-n)Y

  8. Case I – Voltagecontrol of a radial load

  9. Case II – Tie-Transformerbetweensystems of variousstrengths

  10. Differencesbetweensystems of variousstrengths Twoverystrongsystems Twoveryweaksystems Oneveryweaksystem and oneverystrongsystem

  11. Differencesbetweensystems of variousstrenghts

  12. Conclusions • Equivalentcircuitsallowtoanalyzesomeproblemsaboutvoltage and reactive power control associatedwithpowersystemoperation. Thesemodelsgiveinsightintosomephenomenaabout reactive power and voltage control. • Toadd a suplementary «minimumcurrent detector» to «out of voltagerange detector» can allowtooptimizeorminimizebranch «nY» loadingforanygiven load connectedtotransformer. Thisoptimumconditionisnearunitypower factor.

  13. Conclusions • Tap-changers can be usedforstrategies as transfer reactive powerbetweentwostrongsystems, thisstrategy can be considered as voltage control. • Wecannot use tap-changers as voltageregulatorbecauseitcouldhaveundesirableconsequencelike as generatorfallsout of synchronism.

  14. References • Smolinski, W. J., 1981, ‘Equivalent Circuit Analysis Of Power System - Reactive Power And Voltage Control Problems’, University of New Brunswick, Canada.

  15. Are thereanyquestions?

  16. Thanksforyourattention!

More Related