1 / 17

HPLL Demo

HPLL Demo. How did we get here?. Brainstormed how we would utilize the WAN Talked with TEACH about our plan Presented this idea to the TRITON Board Converted the WAN to HPLL Met with the TRITON Tech Coordinators with Scott Schwartz from AT&T. How did we get here?.

kana
Download Presentation

HPLL Demo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HPLL Demo

  2. How did we get here? • Brainstormed how we would utilize the WAN • Talked with TEACH about our plan • Presented this idea to the TRITON Board • Converted the WAN to HPLL • Met with the TRITON Tech Coordinators with Scott Schwartz from AT&T

  3. How did we get here? • Presented the Polycom pricing to the TRITON Board • Ordered the Polycom units • Configured the Polycom units • Tested the HPLL WAN

  4. HPLL Configurations

  5. Blue Box

  6. Port 4 or 7 on the outside of the blue box

  7. 1 x 1 Straight through HPLL WAN

  8. 1 X 1 through a local network

  9. 1 X 1 through a local network

  10. Security?? • The WAN is an open connection • An option would be installing a firewall • Another option is VLAN

  11. 1 X 1 local network firewall

  12. Multiplexing with a VSX 7000

  13. 1 X 3 Connection through the MCU (State Wide Scheduler)

  14. Internet Connection

  15. Configuring the Polycom units • Language setting • Country setting • Give the unit a name (CESA 8) • Add in the IP address (10.184.10.50) • Add the Gateway address (10.184.10.49) • Add the Subnet address (255.255.255.248)

  16. Configuring the Polycom units • Change Quality of Service Settings • System • Admin Settings • Network • IP • Quality of Service • Next • Uncheck Dynamic Bandwidth • Set Maximum Transmit Bandwidth to 384 • Set Maximum Receive Bandwidth to 384

  17. Any Questions?

More Related