1 / 32

Assistive Listening Device Guide AudiologyNOW! 2014

Assistive Listening Device Guide AudiologyNOW! 2014. Tiffany L. Harvey, Au.D., CCC-A Gallaudet University. NEXT. General Information.

kapila
Download Presentation

Assistive Listening Device Guide AudiologyNOW! 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assistive Listening Device GuideAudiologyNOW! 2014 Tiffany L. Harvey, Au.D., CCC-A Gallaudet University NEXT

  2. General Information • This guide presents some (but not all) of the many ways that hearing aids, implant processors and headphones can be combined with the Williams Sound equipment that will be available for you to borrow (pick up stations will be posted). The next slide shows the Williams Sound devices that will be available. The rest of the guide will help you determine some of the ways you can take advantage of these devices. • This equipment will be available at the General Assembly, in the various sessions (where the front rows will be reserved for FM users), at the Poster Reception and in the Exhibit Hall. • If you plan to bring any of your own equipment and wish to connect it with the Williams Sound equipment, note that all of the jacks and plugs on their devices are 3.5 mm. NEXT I’m ready for AudiologyNOW!

  3. Williams Sound Equipment available for loan: Neckloop (3.5 mm plug) Receiver (R35-8; 3.5 mm mono jack) Lapel Microphone (3.5 mm plug) Receiver (RX22-4; 3.5 mm stereo jack) Hand-held Directional Mic (3.5 mm plug) Pocketalker ™ (PKT D1; 3.5 mm mono jack) Headphones (3.5 mm plug) NEXT

  4. Please click on the appropriate box. I use a cochlear implant. I do NOT use a cochlear implant. I’m ready for AudiologyNOW!

  5. More General Information • If you plan to utilize one of the following suggestions that incorporates your telecoil, please ensure that you can access the telecoil. Some processors require a special program, while others do not. Contact your implant audiologist if you are unsure about your needs or if you think you may need programming changes. • If your processor is not represented here, or if you have questions regarding your personal situation, equipment, etc., please contact your audiologist. NEXT I’m ready for AudiologyNOW!

  6. ManufacturersPlease click on your manufacturer’s logo. I would like to start over. I’m ready for AudiologyNOW!

  7. Advanced BionicsPlease click on your device. Harmony Platinum Body-Worn Auria Platinum BTE CII BTE I would like to start over. I’m ready for AudiologyNOW!

  8. Advanced BionicsHarmony • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (built-in) • Ensure that one of your programs utilizes the telecoil • Then you can use a neckloopwith the various receivers or with a Pocketalker™ • If you do not have a telecoil program, you can use an external telecoil • Attach the Direct Connect Earhook (#CI-5840) • Connect the Telecoil Adapter (#5750) • To listen via direct connection • Attach your Direct Connect Earhook • Connect your Direct Connect Cable (#CI-5841) • Connect your 3.5 mm patch cable (3.5 mm plug on each end) • Plug one end into the Direct Connect Cable • Plug the other end into the receiver orPocketalker ™ • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into the Direct Connect Cable I would like to start over. I’m ready for AudiologyNOW!

  9. Advanced BionicsAuria • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (not built-in) • Attach the Direct Connect Earhook (#CI-5840) • Connect the Telecoil Adapter (#5750) • Ensure that one of your programs is either Aux only or 50/50 • Then you can utilize a neckloopwith a receiver or Pocketalker ™ • To listen via direct connection • Attach your Direct Connect Earhook • Attach your Direct Connect Cable (#CI-5841) to theEarhook • Connect your 3.5 mm patch cable (3.5 mm plug on each end) • Plug one end into the Direct Connect Cable • Plug the other end into the receiver orPocketalker ™ • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into the Direct Connect Cable I would like to start over. I’m ready for AudiologyNOW!

  10. Advanced BionicsCII BTE • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via direct connection • Attach your Auxiliary Audio Input Earhook (#CI-5705) • Connect your 3.5 mm patch cable (3.5 mm plug on each end) • Plug one end into the Auxiliary Audio Input Earhook • Plug the other end into a receiver or a Pocketalker ™ • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into the Auxiliary Audio Input Earhook I would like to start over. I’m ready for AudiologyNOW!

  11. Advanced BionicsPlatinum Body-Worn • To listen via direct connection • Connect your 3.5 mm patch cable (3.5 mm plug on each end) • Plug one end into the auxiliary jack on your processor • Plug the other end into the receiver (in larger meetings like the general assembly or sessions) or a Pocketalker ™ (for close conversation in poster sessions) • Connect the Handheld Directional Mic or Lapel Mic, for close conversation • Plug the mic directly into the auxiliary jack I would like to start over. I’m ready for AudiologyNOW!

  12. Advanced BionicsPlatinum BTE • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via direct connection • Attach your Auxiliary Audio Input Earhook (#CI-5705) • Connect your 3.5 mm patch cable (3.5 mm plug on each end) • Plug one end into the Auxiliary Audio Input Earhook • Plug the other end into the receiver or a Pocketalker ™ • Connect the Handheld Directional Mic or Lapel Mic, for close conversation, in poster sessions • Plug the mic directly into the Auxiliary Audio Input Earhook I would like to start over. I’m ready for AudiologyNOW!

  13. CochlearPlease click on your device. Nucleus 5 BTE ESprit 3G Freedom BTE Sprint Freedom Body-worn I would like to start over. I’m ready for AudiologyNOW!

  14. CochlearNucleus 5 BTE • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (built-in) • Ensure that one of your programs utilizes the telecoil • Then you can use a neckloopwith a receiver or a Pocketalker ™ • To listen via direct connection • Attach yourBilateral Personal Audio Cable (z208292) • Plug the 3.5 mm end into the receiver or Pocketalker ™ • Plug the other end into your implant I would like to start over. I’m ready for AudiologyNOW!

  15. CochlearFreedom BTE • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (built-in) • Ensure that one of your programs utilizes the telecoil • Then you can use a neckloopwith a receiver or a Pocketalker ™ • To listen via direct connection • Attach yourPersonal Audio Cable (z60830) • Plug the 3.5 mm end into the receiver or Pocketalker ™ • Plug the other end into the bottom of your implant I would like to start over. I’m ready for AudiologyNOW!

  16. CochlearFreedom Body-worn • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (built-in) • Ensure that one of your programs utilizes the telecoil • Then you can use a neckloopwith a receiver or a Pocketalker ™ • To listen via direct connection • Attach yourPersonal Audio Cable (z60830) • Plug the 3.5 mm end into the receiver or Pocketalker ™ • Plug the other end into the bottom of your implant I would like to start over. I’m ready for AudiologyNOW!

  17. CochlearESprit 3G • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (built-in) • Move your program switch to the ‘T’ or ‘MT’ position • Then you can utilize a neckloopwith a receiver or Pocketalker ™ • To listen via direct connection • Attach your Accessories Adaptor (z60121) to your processor • Attach your Accessory Adaptor Cable (z77081) to the Accessories Adaptor • Attach yourPersonal Audio Cable (z43148) • Plug the end marked ‘Walk1’ into the into the receiver or Pocketalker ™ jack • Plug the end marked ‘Cochlear’ into the Accessories Adaptor Cable • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into the Accessory Adaptor Cable I would like to start over. I’m ready for AudiologyNOW!

  18. CochlearSprint • To listen via your telecoil (not built-in) • Attach your Sprint Telecoil (z43158) • Ensure that one of your programs utilizes the telecoil • Then you can utilize a neckloopwith the various receivers (in larger meetings like the General Assembly and Sessions) or with a Pocketalker ™ (for close conversation at the Poster Reception) • To listen via direct connection • Attach your Personal Audio Cable (z43148) • Plug the end marked ‘Walk1’ into the into the receiver or Pocketalker ™ jack • Plug the end marked ‘Cochlear’ into your implant • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into your implant I would like to start over. I’m ready for AudiologyNOW!

  19. Med-ElPlease click on your device. Opus 2 Tempo+ or Opus 1 Angled Note: the Tempo+ and Opus 1 can only be connected with external devices using the Angled and Remote Power configurations. Tempo+ or Opus 1 Remote Power I would like to start over. I’m ready for AudiologyNOW!

  20. Med-ElOpus 2 • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil • Use a neckloopwith a receiver or a Pocketalker ™ • Set it to ‘T’ in order to utilize a neckloopwith the various receivers or a Pocketalker ™ • Set it to ‘M’ for close conversations • To listen via direct connect • FM Battery Pack Cover and Remote Battery Pack allow direct connection of assistive listening devices and other external equipment (FM systems, MP3 players, etc.) Plug the other end directly into the receiver or Pocketalker ™ I would like to start over. I’m ready for AudiologyNOW!

  21. Med-ElTempo+ or Opus 1 -Angled • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via your telecoil (not built-in) • Attach your TeleMic (02914) • Set it to ‘T’ in order to utilize a neckloopwith the various receivers or a Pocketalker ™ • Set it to ‘M’ for close conversations • To listen via direct connect • Attach either your T+ AuidoMix (yellow ring - 02377) or T+ AudioExt (red ring - 02378) • Plug the end with the colored ring into your implant’s external audio input jack • Plug the other end directly into the receiver or Pocketalker ™ I would like to start over. I’m ready for AudiologyNOW!

  22. Med-ElTempo+ or Opus 1 -Remote Power • To listen via your microphone • Plug the headphones into a receiver (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • Simply place the headphone over your implant microphone • To listen via direct connection • Attach your the RBP Sennheiser Cable (02699) • Plug the end with the yellow ring into your implant’s external audio input jack • Plug the other end directly into the receiver or Pocketalker ™ • Connect the Handheld Directional Mic or Lapel Mic for close conversation • Plug the mic directly into the external audio input jack I would like to start over. I’m ready for AudiologyNOW!

  23. Please click on the appropriate box. I use hearing aid(s). I do NOT use hearing aid(s). I would like to start over. I’m ready for AudiologyNOW!

  24. Hearing Aid Users • To listen via your telecoil • Ensure that telecoil is functioning before convention. • Then you can use a neckloop with a receiver (in the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception). • Plug the neckloop into the receiver or Pocketalker ™ • Place the neckloop around your neck • Put your hearing aid on ‘T’ I would like to start over. I’m ready for AudiologyNOW!

  25. If you do not use hearing aids… • You can use headphones with a receiver (in the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception). • Plug the headphones into the receiver or Pocketalker™ • If you use a bone-anchored implant CLICK I would like to start over. I’m ready for AudiologyNOW!

  26. Please click on the appropriate box. I use a bone anchored implant. I do NOT use a bone anchored implant. I would like to start over. I’m ready for AudiologyNOW!

  27. Please click on the appropriate box. CochlearBAHA Intenso CochlearBAHA BP100 CochlearBAHA Divino CochlearBAHA Cordelle II I would like to start over. I’m ready for AudiologyNOW!

  28. CochlearBAHA BP100 • To listen via your telecoil (built-in) • Place processor on “T” • Then you can utilize a neckloopwith the various receivers(in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • To listen via direct connection • Attach your Personal Audio Cable (90067) • Plug the cable’ into the into the receiver or Pocketalker ™ jack • Plug the other end into the direct audio input port (bottom of sound processor) I would like to start over. I’m ready for AudiologyNOW!

  29. CochlearBAHA Cordelle II • To listen via your telecoil (built-in) • Place processor on “T” • Then you can utilize a neckloopwith the various receivers (in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • To listen via direct connection • Attach your Personal Audio Cable (90067) • Plug the cable’ into the into the receiver or Pocketalker ™ jack • Plug the other end into the direct audio input port (bottom of sound processor) I would like to start over. I’m ready for AudiologyNOW!

  30. CochlearBAHA Divino • To listen via your telecoil (not built-in) • Attach your Telecoil Unit (90185) • Set processor program to “E” • Plug telecoil unit accessory into processor’s electrical input port • Then you can utilize a neckloopwith the various receivers(in larger meetings like the General Assembly or Sessions) or a Pocketalker ™ (for close conversation at the Poster Reception) • To listen via direct connection • Attach your Audio Cord (90065) • Set program to “E” • Plug the audio cord into the into the receiver or Pocketalker ™ jack • Plug the other end into the direct audio input port (bottom of sound processor) I would like to start over. I’m ready for AudiologyNOW!

  31. CochlearBAHA Intenso • To listen via your telecoil (not built-in) • Attach your Telecoil Unit (90185) • Set processor program to “E” • Plug telecoil unit accessory into processor’s electrical input port • Then you can utilize a neckloopwith the various receivers(in larger meetings like the General Assembly or Sessions) or a Pocketalker ™(for close conversation at the Poster Reception) • To listen via direct connection • Attach your Audio Cord (90065) • Set program to “E” • Plug the audio cord into the into the receiver or Pocketalker ™ jack • Plug the other end into the direct audio input port (bottom of sound processor) I would like to start over. I’m ready for AudiologyNOW!

  32. Cynthia Compton-Conley, Ph.D. Director, Assistive Devices Center Gallaudet University Karen Cotton, M.S. Clinical Audiologist Gallaudet University Lisa Devlin, M.S. Clinical Audiologist Gallaudet University Susan Frisbee, M.A. Senior Clinical Specialist, Southeast Advanced Bionics Corporation Hilary Gazeley, Au.D. Clinical Specialist, Northeast Region Med-El Corporation Megan Kessler, M.A. Clinical Applications Specialist, Mid-Atlantic Cochlear Corporation Deborah Livingston, M.S. Au.D. Student, Gallaudet University Mark P. Medcalf Technical Product Manager Williams Sound Corporation Jeannine Ramacho, B.S. Au.D. Student, Gallaudet University Many Thanks to… I would like to start over.

More Related