1 / 8

RBX Temperature Monitoring Proposal

RBX Temperature Monitoring Proposal. German Martinez. Proposal. Install one sensor (AD592,Pt100/1000 or NTC) in each HE sector, monitored with 1 or 2 ELMB per HE-/+ and implement a temporary trip system for each powering sector (would turn off only three wedges with the current powering scheme

kapono
Download Presentation

RBX Temperature Monitoring Proposal

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RBX Temperature Monitoring Proposal German Martinez German Martinez – SX5 Meeting

  2. Proposal • Install one sensor (AD592,Pt100/1000 or NTC) in each HE sector, monitored with 1 or 2 ELMB per HE-/+ and implement a temporary trip system for each powering sector (would turn off only three wedges with the current powering scheme • Advantages: Quality temperature measurement, good hardware protection, easy software integration as there is JCOP framework dedicated to ELMBs. • Disadvantages: even when relatively simple, some real work has to be done and it is at least in part a temporary solution. German Martinez – SX5 Meeting

  3. Sensors • AD590 • Ads: Rad tolerant, Used in RM • Cons: Relatively Expensive (~15 €) • AD592 • Ads: Similar, but Cheaper thatAD590Ads (~6€) • Cons: Not Rad tolerant certified • 4-wire Pt100 • Ads: ELMB & PVSS ready, Rad Hard, recommended by DSS, • Cons: Needs 4 wires, Relatively Expensive • 10K NTC • Ads: ELMB & PVSS ready, Rad Hard, Cheap (~1 €) German Martinez – SX5 Meeting

  4. ELMB • Got Already One, but problems to get the PCI readout card, but probably we can borrow it from BU. • Final version ready, we can buy up to 75 boards that Fernando allocated for CMS. Cheap: 85 CHF each German Martinez – SX5 Meeting

  5. Interlock Hardware • Start to draw Circuit Diagram, but we may just use the “IBox” recalled by Fernando • Already integrated to ELMB & PVSS, Rad tolerant • Created by Wupperthal Uni for ATLAS Pixels LV system • Possible to get some collaboration (Know personally the people involved) German Martinez – SX5 Meeting

  6. Power Switch • Necessary for temporary power supplies • Add as en extra card • Takes signals from comparator signals • Possible control by PVSS through ELMB German Martinez – SX5 Meeting

  7. DSS Integration • Should be an add on card that process signals from comparators • Possible PVSS control via ELMB signals • Need to discuss requirements with DSS people • Need to discuss alarm conditions within the collaboration German Martinez – SX5 Meeting

  8. Now the important issues • Sadovar and Coffee: • Old coffee machine back in operation, but results not as expected • (Cafeteria quality, but does not meet our standards of Excellence ) • Logistics: • Has somebody think of water supply and a sink? German Martinez – SX5 Meeting

More Related