1 / 10

AT91SAM7 L Enhanced Embedded Flash Controller

AT91SAM7 L Enhanced Embedded Flash Controller. EEFC Features. 64KB or 128KB single plane memory organized in several pages 128-bit wide interface Two 128-bit buffers for code read acceleration in sequential access One write buffer for page programming Write buffer size  Page size

kasa
Download Presentation

AT91SAM7 L Enhanced Embedded Flash Controller

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AT91SAM7LEnhanced Embedded Flash Controller

  2. EEFC Features • 64KB or 128KB single plane memory organized in several pages • 128-bit wide interface • Two 128-bit buffers for code read acceleration in sequential access • One write buffer for page programming • Write buffer size  Page size • One lock bit per lock region • General purpose NVM bits • Controls specific features in the device including Hardware Security Protection

  3. Embedded Flash Organization • 128KB Flash • 512 pages of 256 bytes • 8 lock regions of 16KB • Single plane • 64KB Flash • 256 pages of 256 bytes • 16 lock regions of 4KB • Single plane

  4. Embedded Flash Performance • 0 wait state single cycle access up to 17MHz • 1 wait state up to 30MHz • 3 wait states up to 37MHz • 10ms Full Chip Erase • 2.3ms Page Programming Time • 4.6ms Page Programming Time including auto-erase

  5. Sequential Code Read Acceleration • Two 128-bit prefetch buffers to optimize sequential Code Fetch in ARM mode • In case of sequential reads, the first access takes 4 cycles, the other ones only 1 cycle 3WS

  6. Sequential Data Read Acceleration • One 128-bit data read buffer to speed up sequential Data reads in ARM mode 1WS

  7. Flash Commands

  8. Embedded Flash Descriptor • Command Get Flash Descriptor allows to learn the Flash organization • Suitable for software adaptability when migrating to higher Flash density • Read Flash Result Register after writting the GETD command to get Flash information • MC_FRR • First read – Word 0 – FL_ID (Get Flash ID) • Second read – Word 1 – FL_Size (Get Flash Size) • Third read – Word 2 – FL_Page_Size (Get Flash Page Size) • …

  9. NVM Bits • Lock bits protect lock regions from being written or erase by inadvertence • 8 lock bits for the 128KB Flash (16KB) • 16 lock bits for the 64KB Flash (4KB) • General Purpose NVM Bits • GPNVM0 enables the Security Bit • GPNVM1 defines the memory boot (Flash or bootROM)

  10. What’s New? • 128-bit wide memory bus • No FMCN initialization • Zero Wait State up to 17MHz • Sequencial code read acceleration in ARM mode • New commands • Get Flash Descriptor, Get Lock Bit Status, Get GPNVM Bit Status associated with the Flash Result Register • No dedicated command to enable the security bit but GPNVM bit instead • No NVM bits for BOD

More Related