1 / 19

Microelectronics Clean Room Electrical and Computer Engineering

Microelectronics Clean Room Electrical and Computer Engineering. Orbital Tube Welder. Overview. General Information Safety Set-up Tube Preparation: facing, cleaning Operation Weld Schedules Weld Evaluation. Orbital Tube Welding. Gas Tungsten Arc Welding (GTAW) process Fusion Welding

kata
Download Presentation

Microelectronics Clean Room Electrical and Computer Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Microelectronics Clean RoomElectrical and Computer Engineering Orbital Tube Welder by Clayton Gatewood

  2. Overview • General Information • Safety • Set-up • Tube Preparation: facing, cleaning • Operation • Weld Schedules • Weld Evaluation by Clayton Gatewood

  3. Orbital Tube Welding • Gas Tungsten Arc Welding (GTAW) process • Fusion Welding • Model 8 Weld Head • Model 207A Power Supply • Argon Gas Cylinder • Facing Tool • ARC Machines, Inc. by Clayton Gatewood

  4. Gas Tungsten Arc Welding (GTAW) Process • Used to weld tubing that remains in-place while the tungsten electrode rotates around the target joint. • Material edges are heated by an arc and are fused together without a filler. by Clayton Gatewood

  5. Safety • Electricity Hazard: Shock, RF Starting, Pacemaker, Electric Storage Devices • Fire Hazard: Clothing, Sealed Containers, Welded Material Hot to Touch • Harmful UV Radiation (eyes and skin) • Toxic Fumes from Welding Stainless Steel, Hexavalent Chromium (lung cancer) • Air Displacement by Argon Gas • Factory Training Essential • Keep Hands and Fingers Clear • Compressed Gas Cylinders • Cleaning Chemicals by Clayton Gatewood

  6. Set-Up • Ensure Power is Off • Connections: Weld Head, Argon Gas, main power cord • Apply Argon (¼ turn) @ 20 psi by Clayton Gatewood

  7. Tube Preparation • Facing by Clayton Gatewood

  8. Welding Cleanliness • Materials to be welded must be free of grease, oil, rust, dirt, paint and other contaminants. • Dirty materials can result in porosity, discoloration, slag deposits, and generally poor quality welds. by Clayton Gatewood

  9. Operation • Align target joint with tungsten electrode • Connect Argon Purge Line and set for 5 psi (for ¼” OD tubing) • Select Weld Schedule • Ensure Power Supply is “Ready to Weld” • Press “Seq Start” • Prepurge, Weld, Downslope, Postpurge by Clayton Gatewood

  10. Weld Schedule Development • An orbital tube weld may be done in 4 or more levels. • It must include enough time for tie-in before the downslope. by Clayton Gatewood

  11. Weld Schedules • Pre / Post Purge Time • Up / Downslope • Rotation Direction • Rotation Delay • Pulse Mode • Rotation Mode • RPM (Rotor Travel Speed) • Level Times • Level Amps • Background Amps • Pulse Times by Clayton Gatewood

  12. Power Supply Sequence by Clayton Gatewood

  13. Sample Weld Schedules by Clayton Gatewood

  14. Weld Evaluation • 60 to 80% overlap on outer diameter • Poor rotation delay • Borescope to inspect inner diameter • Full penetration • No cracks, undercut, crevices, pits, or embedded or protruding material by Clayton Gatewood

  15. Weld Profiles by Clayton Gatewood

  16. Weld Defects by Clayton Gatewood

  17. Argon Purge and Oxygen • Left to Right = effect of increasing levels of oxygen in the argon purge by Clayton Gatewood

  18. Possibilities … by Clayton Gatewood

  19. Works Cited "MODEL 207 Operator Training Guidelines." Arc Machines, Inc.CD-ROM.Pacoima, CA: Arc Machines, Inc., 2007. Model 207 Microprocessor-Controlled Power Supply.1 Nov. 1996. Arc Machines, Inc.. 16 Oct. 2007.<http://www.arcmachines.com/prodMed/m207ps/m207ps.html>. by Clayton Gatewood

More Related