1 / 10

-Hangers & Supports

011-i. CHAPTER. -Hangers & Supports. -Outside ducts. -Handling unit connection. -Dampers, Grilles & Diffusers. -Flexibles Ducts. Plug. Tie rod M6. Types of profiles. Support profile & nut M6. ± 40x20mm. Hangers & supports. 1.000mm. 2.000mm. 1.000mm. 2.000mm. 3.000mm.

katy
Download Presentation

-Hangers & Supports

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 011-i CHAPTER -Hangers & Supports -Outside ducts -Handling unit connection -Dampers, Grilles & Diffusers -Flexibles Ducts

  2. Plug Tie rod M6 Types of profiles Support profile & nut M6 ± 40x20mm. Hangers & supports 1.000mm 2.000mm 1.000mm 2.000mm 3.000mm • Weigth m² of duct: ±1,1 Kg.

  3. Outside duct INSIDE OUTSIDE Application with brush or roller Standard rubber painting for terraces Recommended: THREE hands • Recommended: panel PIR-ALU 35/30 (30mm thickness)

  4. Unit conections Duct Glue inside of the “F” profile Rivet “F” profile Gasket • Application of the “F” profile

  5. Installation of dampers & V.C.D. Gasket “F” profile Rivet Duct Glue inside of the “F” profile • Application of the “F” profile

  6. Installation of grilles Profile of 25x20x20mm Profile glued of 25x20x20mm Profile of 20x10x20mm glued in the male Fixation of the grilles: See the recommendation of every producer. • Application of the “U” profile

  7. Installation of circular diffusers Support adjustable Tie rod M6 (1) Double reinforcement disk with double nut M6 Standard collar Ø in aluminium Kit of diffusor with special support to adapt the flexible duct Fixation of the diffusers: See the recommendation of every producer. • Application in the ceiling

  8. Installation of square diffusers Support adjustable Tie rod M6 (2) Angle bracket and nut M6 Collar with PIR-ALU panel Fixation of the diffusers: See the recommendation of every producer. • Application in the ceiling

  9. Installation of lineal diffusers Support adjustable Tie rod M6 (1) Double reinforcement disk Nut M6 (2) Angle bracket Fixation of the diffusers: See the recommendation of every producer. • Application in the ceiling

  10. Installation of the flexible duct Seal with silicon for the exterior of the colar Bend the lashes of the collar inside of the duct Mark Ø collar To cut Metalic or nylon climp Install the collar Install the Flexible duct • Standard Ø aluminium collar with lashes

More Related