ITK-330 Chemical Reaction Engineering

1. ITK-330Chemical Reaction Engineering Introduction Dicky Dermawan www.dickydermawan.net78.net dickydermawan@gmail.com

2. Introduction:Traditional “Process” Scheme

3. References Fogler HS, Elements of Chemical Reaction Engineering, 4th ed., Prentice (1999) Levenspiel O, Chemical Reaction Engineering, 2nd ed., Wiley (1972)

4. Material Covered by ITK-330 • Fundamental understanding: • Mole Balance • Conversion & Reactor Sizing • Rate Laws & Stoichiometry • Isothermal Reactor Design • More on….. • Multiple Reaction • Steady State Heat Effect

5. Score & Grading • 20 4 all homework & quiz • 25 4 1st midterm exam • 25 4 2nd midterm exam • 30 4 final term examination • A 4 74.5 ++ • B 4 59.5 ++ • C 4 49.5 ++ • D 4 39.5 ++

6. How 2 Master CRE

7. What will be important in the near future • CD Tour • Intro 2 Auxiliary: Computer Program • MathCAD • Polymat

8. Basic Concepts ITK-330Chemical Reaction Engineering Dicky Dermawan

9. 1Mole Balance In – Out + Generation = Accumulation

10. Reactor Performance Equation

11. Using Performance Equations:Sample Problem P1-12C The gas phase reaction: A  B+C Is carried out isothermally in a 20 L constant-volume batch reactor. Twenty moles of pure A is initially placed in the reactor. The reactor is well mixed. If the reactor is first order: -rA = k.CA with k = 0.865 min-1, calculate the time necessary to reduce the number of moles of A in the reactor to 0.2 mol If the reaction is second order: -rA = k.CA2 with k = 2 L.mol-1.min-1 calculate the time necessary to consume 19.0 mol of A c. If the temperature is 127oC, what is the initial total pressure? What is the final total pressure assuming the reaction goes to completion?

12. 2Conversion & Reactor Sizing

13. Conversion & Reactor Sizing:Batch Systems Batch reactor performance equation Moles of A consumed = Moles of A fed – Moles of A IN the reactor 

14. Conversion & Reactor Sizing:Flow Systems PFR performance equation  CSTR performance equation 

15. Reactor Sizing:Levenspiel’s Plot In order to size a reactor, all we need is the reactor type and relationship between –rA and X In using these design equations, nothing needs to be assumed on when, where, or how the reaction is carried out …but the actual shape of the curve depends on these

16. Reactor in Series

17. Performance Equations in term of Conversion

18. Application of the concept:Sample Problem P2-6B The exothermic reaction: A  B+C was carried out adiabatically and the following data recorded: The entering molar flowrate of A was 300 mol/min What are the PFR and CSTR volumes necessary to achieve 40% conversion? Over what range of conversions would the CSTR and PFR volumes be identical? What is the maximum conversion that can be achieved in a 10.5 L CSTR? What conversion can be achieved if A 7.2 L PFR is followed in series by a 2.4 L CSTR? What conversion can be achieved if a 2.4 L CSTR is followed in series by a 7.2 L Plot the conversion and rate of reaction a function of PFR reactor volume up to a volume of 10 L

19. Assignment: For the irreversible gas-phase reaction: A  2 B the following correlation was determined from laboratory data (the initial concentration of A is 0.2 gmol/L): The volumetric flow rate is 0,5 m3/h. a. Over what range of conversions are the plug-flow reactor and CSTR volumes identical? b. What conversion will be achieved in a CSTR that has a volume of 90 L? c. What plug-flow reactor volume is necessary to achieve 70% conversion? d. What CSTR reactor volume is required if effluent from the plug-flow reactor in part (c) is fed to a CSTR to raise the conversion to 90%? e. If the reaction is carried out in a constant-pressure batch reactor in which pure A is fed to the reactor, what length of time is necessary to achieve 40 % conversion?

20. 3Rate Law & Stoichiometry

21. Consideration….. Reactor sizing can be carried out when the function is available This function, as depicted in Levenspiel Plot, is specifically dependent of reactor type & reaction conditions (temperature profile, pressure, reactant ratio) and therefore limiting its use From kinetic point of view: Since (batch) or (continue), and, from the definitions of conversion (batch) or (continue), therefore Substitution of into results , which, on specific temperature profile gives The functions can be derived using the concept of stoichiometry

22. Stoichiometric Table Taking A as basis Consider Batch Systems

23. Expressing Concentrations For Constant Volume Systems Batch Systems

24. Expressing Concentrations For Ideal Gas: Thus…

25. For Flow Systems Thus… For Constant FlowSystems For Ideal Gas Systems

26. Example of Expressing–rA=rA(X) Consider 2 SO2 + O2 > 2 SO3 The rate law: –rA = k.CSO2.CO2 Taking SO2 as basis: SO2 +1/2 O2 > SO3 –rA = k.CSO2.CO2 –rA = =rA(X)

27. Example 3-8Calculating the Equilibrium Conversion The elementary gas-phase reversible decomposition of nitrogen tetroxide, N2O4, to nitrogen diokside, NO2, N2O42 NO2 Is to be carried out at constant temperature & pressure. The feed consists of pure N2O4 at 340 K and 2 atm. The concentration equilibrium constant at 340 K is 0.1 mol/L Calculate the equilibrium conversion of N2O4 in a constant volume batch reactor Calculate the equilibrium conversion of N2O4 in a flow reactor Express the rate of reaction solely as a function of conversion for a flow system and for a batch system Explain why is the equilibrium conversion in (a) & (b) are different

28. P3-14B Reconsider the decomposition of nitrogen tetroxide in Example 3-8. The reaction is to be carried out in PFR and also in a constant-volume batch reactor at 2 atm and 340 K. Only N2O4 and an inert I are to be fed to the reactors. Plot the equilibrium conversion as a function of inert mole fraction in the feed for both a constant-volume batch reactor and a plug flow reactor