150 likes | 279 Views
Chapter 11 Oxidation ( 氧化 ) and Reduction ( 还原 ). Acid-base reaction: Transfer of proton Oxidation and reduction: transfer of electron. 11.1 Oxidation is the loss of electrons and reduction is the gain of electrons. Oxidation is the process whereby a reactant loses one or more electrons.
E N D
Chapter 11 Oxidation (氧化) and Reduction (还原) Acid-base reaction: Transfer of proton Oxidation and reduction: transfer of electron
11.1 Oxidation is the loss of electrons and reduction is the gain of electrons • Oxidation is the process whereby a reactant loses one or more electrons. • Reduction is the opposite process whereby a reactant gains one or more electrons. • Oxidation and reduction are complementary and simultaneous processes. • 2Na + Cl2 2NaCl • 2Na 2Na+ + 2e- Oxidation • Cl2 + 2e- 2Cl- Reduction • In this reaction, sodium is acting as a reducing agent (还原剂), which is any reactant that causes another reactant to be reduced. Conversely, the chlorine causes oxidation of the sodium and so it is acting as an oxidizing agent (氧化剂). Fig 11.1 formation of sodium chloride
Different elements have different oxidation and reduction tendencies Little tendency to lose or gain electrons Tendency to gain electrons Tendency to lose electrons
11.3 The energy of flowing electrons can be harnessed • Electrochemistry (电化学) is the study of the relationship between electrical energy and chemical change: Use oxidation-reduction reaction to produce an electric current or use an electric current to produce an oxidation-reduction reaction. Fig 11.7 the salt bridge completes the electric circuit
The electricity of a battery comes from oxidation-reduction reactions • A voltaic cell, which is an all-in-one, self-contained unit, is called a battery. Batteries are either disposable or rechargeable. • Principle of batteries: Two materials that oxidize and reduce each other are connected by a medium through which ions travel to balance an external flow of electrons.
Disposable batteries Reduction 2NH4++2e- 2NH3+H2 Fig 11.8 a common dry-cell battery with a graphite rod immersed in a paste of ammonium chloride, manganese dioxide, and zinc chloride Oxidation Zn Zn2++2e- ZnCl2 (ag) + 2NH3 (g) Zn(NH3)2Cl2 (s) 2MnO2 (s) + H2 (g) Mn2O3 (s) + H2O (l) Electrode (电极) cathode (阳极): where chemicals are reduced. Anode (阴极): where chemicals are oxidized.
Alkaline battery Fig11.19 Alkaline batteries last a lot longer than dry-cell batteries and give a steadier voltage, but they are expensive Zn (s) + 2OH- (aq) ZnO (s) + H2O (l) +2 e- Oxidation 2MnO2 (s) + 2e- Mn2O3 (s) + 2OH- (aq) Reduction
Rechargeable battery engine Fig 11.10 (a) electrical energy from the battery forces the starter motor to start the engine. (b) the combustion of fuel keeps the engine running and provides energy to spin the alternator, which recharges the battery. Note that the battery has a reversed cathode-anode orientation during recharging Oxidation Pb + SO42- PbSO4 + 2e Reduction of elemental Pb to pb2+ Reduction PbO2 + SO4- + 4H++ 2e PbSO4 + 2H2O Oxidation of elemental pb4+ to pb2+ engine alternator Oxidation PbSO4 + 2e Pb + SO42- Reduction of elemental Pb2+ to pb Reduction PbSO pb4+ 4 + 2H2O PbO2 + SO4-+ 4H++ 2e Oxidation of elemental pb2+ to pb4+
Fuel cells (燃料电池) are highly efficient sources of electrical energy Oxidation 2H2+4OH- 4H2O+4e- Reduction 4e-+O2+2H2O 4OH- Fig11.11 the hydrogen-oxygen fuel cell Porous graphite electrodes
Fig 11.12 because this bus is powered by a fuel cell, its tail pipe emits mostly water vapor
Electrical energy can produce chemical change • Electrolysis (电解) is the use of electrical energy to produce chemical change. Fig 11.14 the electrolysis of water produces hydrogen gas and oxygen gas in a 2:1ratio by volume, which is in accordance with the chemical formula for water:H2O. For this process to work, ions must be dissolved in the water so that the electricity can be conducted between the electrodes Electrical energy + 2H2O 2H2 (g) + O2
Figure 11.15 The melting point of aluminum oxide(2030℃) is too high for it to be efficiently electrolyzed to aluminum metal. When the oxide is mixed with the mineral cryolite. The melting point of the oxide drops to a more reasonable 980℃. A strong electric current passed through the molten aluminum oxide-cryolite mixture generates aluminum metal at the cathode, where aluminum ions pich up electrons and so are reduced to elemental aluminum Oxidation 2AlOF32-+6F-+C 2AlF63-+CO2+4e- Molten Al2O3+Na3AlF6 mixture Power source cathode Reduction AlF63-+3e- Al +6F-
11.4 Oxygen is responsible for corrosion and combustion • Iron to rust: 4Fe + 3O2 +3H2O 2Fe2O3 .3H2O • A thin layer of protective layer was formed during the oxidation of aluminum. • Since aluminum has higher tendency to be oxidized, a thin layer of aluminum on iron can protect iron from corresion. Figure 11.20 As electrons flow into the hubcap and give it a negative charge, positively charged chromiun ions move from the solution to the hubcap and are reduced to chromium metal, which deposits as a coating on the hubcap. The solution is kept supplied with ions as chromium atoms in the cathode are oxidized to Cr2+ ions Cathodic protection Electroplating
Combustion is also an oxidation-reduction reaction. • Many well “designed” oxidation-reduction reactions happen in our bodies.