1 / 5

Jute Padding 1974 TCS before removal

Jute Padding 1974 TCS before removal. Jute Padding 1974 TCS. Chassis section of jute. Cloth backed rubber ‘Y’ piece, 0.125 thick. Top ‘Y’ piece, two pieces of jute bonded 0.25” + 0.50” thick. Jute Padding 1974 TCS. Total length 57.5. 23.25. 29.0. 24.0. 26.125. 5.50. 14.375. 6.50.

keith
Download Presentation

Jute Padding 1974 TCS before removal

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jute Padding 1974 TCS before removal

  2. Jute Padding 1974 TCS

  3. Chassis section of jute Cloth backed rubber ‘Y’ piece, 0.125 thick Top ‘Y’ piece, two pieces of jute bonded 0.25” + 0.50” thick Jute Padding 1974 TCS

  4. Total length 57.5 23.25 29.0 24.0 26.125 5.50 14.375 6.50 10.25 6.00 16.125 4.75 5.50 3.25 2.75 2.50 Front end is square to the centerline, just the picture angle 45 degree angle 49.0 to the corner Thickness is 0.25 after 30 plus years Jute Covering Main Box Section of ChassisAll dimensions in inches & symmetric about centerlineStart with a piece 60 x 28, you’ll have plenty Cut the external dimensions oversize and the internal undersize and fit to chassis

  5. 26 x 2.25 x 0.50 thick 1 layer 0.25 jute bonded to second layer 0.50 jute 0.75 total thickness Rubber side on the bottom. Basically 0.125 thick rubber with a thin cloth backing 14.75 13.75 Both pieces the same size but different thicknesses 4.50 5.0 Front cross-member and rear Y piece

More Related