Middle School Math & Engineering VMI STEM Conference October 2014

1. Middle School Math & EngineeringVMI STEM ConferenceOctober 2014 • Presented by Diane Leighty

2. Your Immersion into STEM begins NOW! Hard hats, safety glasses, and snacks provided!!!

3. Your 1st Design Challenge • Materials • 2 sheets of paper • NO OTHER Materials may be used! • Challenge • Build a tower as tall as you can make it that will stand on its own.

4. Sharing & Discussion • What was the most challenging aspect of this task? • If you could have one additional resource, what would it be and why? • What mathematics do you see in this task? • What other skills are needed to be successful in this task? Process Standards?

5. WHY ENGINEERING?

6. Engineering Skills For ALL! • Communication • Creativity/Inventiveness • Critical Thinking Skills/Problem Solving • Applied math & science • Research skills • Collaboration – team work!

7. Engineering in our world

8. Engineers ________ • Have Fun • Work • Think • Rock • Build • Design • Create • Invent • ALL OF THE ABOVE

9. What Engineers DO…. • Math • Calculating beam sizes, duct sizes, concrete thickness • Utilizing formulas • A lot of simple addition, subtraction, multiplication, division • Must Avoid Mistakes! • Science • Analyze Forces (Wind, Earthquake, Gravity) • Understand Airflow (Ductwork) • Utilize Heat Transfer Theory (Cooling Water, Boilers)

10. Knowledge and Skills Required • Routine Daily Requirements • Reading Graphs • Field Measurements • XYZ Coordinate Interpretation • Develop Microsoft Excel spreadsheets • Converting metric to US Standard • Converting “Ft-in” to decimal • Scaling drawings (ratio)

11. Science Standards K-12 1. Develop and use an experimental design in scientific inquiry. 2. Use the language of science to communicate understanding. 3. Investigate phenomena using technology. 4. Apply scientific concepts, skills, and processes to everyday experiences. 5. Experience the richness and excitement of scientific discovery of the natural world through the collaborative quest for knowledge and understanding.

12. Science Standards K-12 7. Develop scientific dispositions and habits of mind including: • curiosity; • demand for verification; • respect for logic and rational thinking; • consideration of premises and consequences; • respect for historical contributions; • attention to accuracy and precision; and • patience and persistence. 8. Develop an understanding of the interrelationship of science with technology, engineering and mathematics.

13. Math Process Goals The content of the mathematics standards is intended to support the following five goals for students: • becoming mathematical problem solvers, • communicating mathematically, • reasoning mathematically, • making mathematical connections, • using mathematical representations to model and interpret practical situations.

14. Math Standards Of Learning • Computation • Measurements, unit conversions • Size, shape, material characteristics • Data collection, graphical representation • Scale models • Valid conclusions from analyzing data • Experimental results in written form

15. Your 2nd Design Challenge • Materials • One box • Tape • Scissors • Paper bag to collect “parts”. • Challenge • Build a new box out of the original one that is now a cube with the same volume as the original box.

16. Plan a design for your box • Measure your box and calculate its volume. • Calculate the lengths of the sides of the new box that will be in the shape of a cube. • Determine how the materials will be used in the creation of the cube.

17. Implement your design- 15 minutes • Build your box. • What is the surface area of your box? • What materials are left over? What is the surface area of these materials?

18. Discussion • Share your new box with the group. • How do the surface areas of the original and new box compare?

19. How and when to use? • What mathematics is used? • Is there more that can be done with the information collected? If so, what?

20. Gumdrop DomeDesign Brief • Materials: • 25 gumdrops • 10 toothpicks • Ruler (cm and inches)

21. Create Your Design • Design a geometric “solid” that: • Uses all of the toothpicks; • Has at least 6 sides. • Will not bend, twist, or collapse easily when pushed on.

22. Implement Your Design • Build your design. • Test your design by gently pushing on all sides. • If time allows improve your design or create a different design that will meet the criteria.

23. Share Results • Share with the whole group your design, and how well it “worked” – was it able to sustain itself from the force of a “push”?

24. Application of the Lesson • What is needed in order for your students to successfully complete this design challenge? • How can you adapt this lesson for your students? • What questions can you ask the students?

25. Virtual Field Trip Component: • ACEC/MSIC Virtual Field Trip

26. Field Trips

27. The New State Capitol

28. New Kent Rest Area

29. I-295 Short Pump Improvements

30. Marine Corps Museum

31. Hamilton Beach/Proctor-Silex

32. James River Water Plant

33. Miller & Rhoads Bldg. Renovation(New Hilton Hotel)

34. Students Engaged…. shows some of the experiences

35. What’s Next? • Lessons in the classroom • One per 9-week grading period • Integrate into regular curriculum – NOT an add-on! • Keep it SIMPLE! • Work together. • As your PTO/parents to contribute materials.

36. Where can we get the lessons? • Children’s Engineering websites • http://www.childrensengineering.com/ • http://www.doe.virginia.gov/VDOE/Instruction/CTE/te/K-5/Engineering/ • http://www.childrensengineering.com/everydaydesignbriefs.htm

37. PBS Websites • Building Big – PBS website • Zoom – PBS website

38. Additional Resources for Middle School Teachers • ASCE Building Big Educators’ Guide at www.pbs.org/wgbh/buildingbig/educator/index.html provides classroom exercises in understanding bridges, domes, skyscrapers, dams, tunnel and local wonders. • West Point Bridge Contest – an annual internet based interactive bridge design contest at bridgecontest.usma.edu • Richmond Joint Engineers Council Engineers’ Week annual paper competition. • ASCE Engineers’ Week Bridge Design Competition at the Richmond Science Museum. • ASME Engineers’ Week Egg Drop Competition at the Richmond Science Museum. • Annual Girls in Engineering hosted by the SWE at the Richmond Science Museum. • Local Engineering Association representatives available to speak to middle school classes from ASCE and VTCA as well as many others.