1 / 21

Unit 12 Conduction in Liquids and Gases

Unit 12 Conduction in Liquids and Gases. Unit 12 Conduction in Liquids and Gases. Objectives: Define positive and negative ions. Discuss electrical conduction in gases. Discuss electrical conduction in a liquid. Discuss several of the ionization processes.

kennedy-wilcox
Download Presentation

Unit 12 Conduction in Liquids and Gases

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unit 12 Conduction in Liquids and Gases

  2. Unit 12Conduction in Liquids and Gases Objectives: Define positive and negative ions. Discuss electrical conduction in gases. Discuss electrical conduction in a liquid. Discuss several of the ionization processes.

  3. Unit 12Conduction in Liquids and Gases • Ions • An ion is a charged atom. • Positive ions have a deficiency of electrons. • Negative ions have extra electrons.

  4. Unit 12Conduction in Liquids and Gases • Conduction in Liquids • An electrolyte is a solution that will conduct electricity. • An electrolytic solution may be created from distilled water by adding salt. • A wide range of electrolytes can be created from acids, alkalies, and metallic salts.

  5. Unit 12Conduction in Liquids and Gases Conduction in a liquid.

  6. Unit 12Conduction in Liquids and Gases • Electrolysis • Electrolysis is the process of separating elements electrically.

  7. Unit 12Conduction in Liquids and Gases • Electroplating • Electroplating uses electricity to deposit atoms of one type of metal onto a different metallic surface. • DC current is passed from a power source, through an electrode immersed in an electrolyte, to the object to be plated and back to the power source.

  8. Unit 12Conduction in Liquids and Gases • Electroplating Factors • The electrolyte solution must contain ions of the metal to be plated. • Metal ions are always positively charged. • The plated object must be connected to the negative power terminal. • Direct current is used as the power source. • The positive electrode is the same metal as the new coating of the plated object.

  9. Unit 12Conduction in Liquids and Gases The electroplating process.

  10. Unit 12Conduction in Liquids and Gases • Conduction in Gases • Conduction in gases occurs when an arc is established across a gap between two electrodes. • The initial voltage required to start the arc is very high. • A reduced amount of voltage is required to sustain an arc.

  11. Unit 12Conduction in Liquids and Gases • Conduction in Gases • Current flow across the gap is aided by an ion trail caused by ionized gas. • An arc welder is an example of a practical application.

  12. Unit 12Conduction in Liquids and Gases • Ionization in Gases • Ionization potential is the amount of voltage, or potential, an electron must possess to cause ionization. • Conduction in a gas occurs as a result of electron impact from molecule to molecule. • The pressure of the ionized gas affects the required ion potential for current flow.

  13. Unit 12Conduction in Liquids and Gases Electron impact frees electrons from gas molecules.

  14. Unit 12Conduction in Liquids and Gases Please insert Figure 11-10 Electron impact under high gas pressure.

  15. Unit 12Conduction in Liquids and Gases Electron impact under low gas pressure.

  16. Unit 12Conduction in Liquids and Gases The cathode ray tube is another application for conduction in gases.

  17. Unit 12Conduction in Liquids and Gases • Review: • An electrolyte is a solution that will conduct electricity. • An electrolytic solution may be created from distilled water by adding salt. • Solutions of acids, alkalies, and metallic salts are referred to as electrolytes.

  18. Unit 12Conduction in Liquids and Gases • Review: • Electroplating is the process of depositing the atoms of one type of metal onto another. • Electroplating uses electricity to deposit atoms from one metal onto a different metallic surface. • DC current passes from a power source, through an electrolyte, to the object to be plated, and back to the power source.

  19. Unit 12Conduction in Liquids and Gases • Review: • Factors affecting electroplating of metals: • The electrolyte solution must contain ions of the plating metal. • Metal ions are always positively charged. • The object to be plated must be connected to the negative power terminal. • The power source is direct current. • The positive terminal and the coating must be of the same metal.

  20. Unit 12Conduction in Liquids and Gases • Review: • The term electrolysis refers to the process of separating elements electrically. • Conduction through a gas depends on the ionization of gas molecules. • The amount of voltage required to cause ionization of a gas is called the ionization potential.

  21. Unit 12Conduction in Liquids and Gases • Review: • Gas can be ionized more easily when it is at a low pressure than when it is at a high pressure. • The ionization potential is different for different gasses. • The most important factor in the ionization of a gas is electron impact.

More Related