1 / 48

Solutions

Solutions. We all want them – but few of us have them. Solutions. A solution is a completely homogeneous mixture. Solutions have one or more solutes (dissolvee) and a solvent (dissolver). When a substance dissolves it is soluble

khoi
Download Presentation

Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solutions We all want them – but few of us have them.

  2. Solutions • A solution is a completely homogeneous mixture. • Solutions have one or more solutes (dissolvee) and a solvent (dissolver). • When a substance dissolves it is soluble • Liquids that mix are miscible, those that don't are immiscible

  3. Characteristics of solutions • Fluid solutions are clear (transparent). • Dissolving is a physical change. Dissolved substances retain their chemical identities. • The physical attributes of the solvent and solute will be altered (physical state, mp, etc).

  4. Types of solutions • Solutions can involve any state of matter. • Liquid/liquid • Solid/solid • Gas/gas • Solid in liquid • Gas in liquid

  5. Aqueous solutions - ionic • Solvation of ionic substances

  6. Aqueous solutions - ionic • Solvation involves dissociation of the solid ionic solute.

  7. Aqueous solutions - ionic • The energy needed to break strong ionic bonds comes from the energy liberated when solvent/solute interactions are formed. • Water, being polar, has partially positive and negative regions which are attracted to the positive and negative ions of the ionic solute.

  8. Aqueous solutions - ionic • Ionic salts are insoluble in non-polar solvents

  9. Aqueous solutions - molecular • Solvation of molecular substances. • Molecular substances do not have strong interactions to overcome. • Dissociation in solution does not occur. • Neutral molecules are separated from each other. • Molecules with polar regions will be soluble in water. • Examples – ethanol (CH3CH2OH), sucrose

  10. Aqueous solutions - molecular • Sucrose

  11. Aqueous solutions - molecular • Polar substances are soluble in water because the polar water molecule can attach to the polar portions of the solute molecule. • Nonpolar molecules are not soluble in water because water is more attracted to itself than the potential solute. • Nonpolar molecules usually do not contain oxygen – example methane (CH4).

  12. Aqueous solutions - molecular • Molecule polarity depends on bond polarity and geometry. • Bond polarity depends on electronegativity differences. • Miscibility – Liquid solutes • Liquids which mix in all proportions are said to be miscible. • The liquid present in larger amounts is considered the solvent. • When mixing unlike liquids, volumes do not necessarily add.

  13. Solubility • Rules of Thumb • Like dissolves like • Polar dissolves polar, nonpolar dissolves nonpolar • Measuring solubilty • Accepted unit is g/100 g solvent. • Temperature must be specified – may be 0º C, may be 20º C, may be 100ºC

  14. Solubility graph

  15. Concentration • Per cent concentration • Weight % (w/w) • w/w% = (mass solute)/(mass solution)x100% • mass solution = mass solute + mass solvent • Volume % (v/v) • v/v% = (volume solute)/(volume solution)x100% • volume solution ≠ volume solute + volume solvent!!

  16. % concentration problem • A solution is prepared by mixing 1.00 g ethanol (C2H5OH) with 100.0 g water to give a final volume of 101 mL. Calculate the w/w and v/v % concentrations. (The density of ethanol is 0.789g/mL)

  17. Solution to concentration problem • w/w: [1.00g eth/101g soln]x100% = 0.990%w/w • v/v: volume of ethanol is 1.00g/0.789g/mL = 1.27mL [1.27mL/101mL]x100% = 1.26%v/v

  18. Molarity • Unit: moles/(liter solution) • Symbol: M • Making a solution: Solute is measured, dissolved in a small amount of water and diluted to desired volume in a volumetric flask.

  19. Molarity examples • What mass of KCl is necessary to make 300 mL of a 0.15 M solution? • Solution: 0.15 M x 0.300 L = 0.045 mol KCl molar mass of KCl = 74.6 g/mol 0.0450 mol x 74.6 g/mol = 3.4 g KCl

  20. Molarity example • You have 458 mL of a 0.29 M solution of sodium hydroxide. What mass of sodium hydroxide is contained therein? • Solution: 0.458 L x 0.29 M = 0.13 mol NaOH 0.13 mol x 40. g/mol = 5.2 g NaOH

  21. Molality • Unit: (moles solute)/(kg solvent) • Symbol: m • Examples: How would you prepare a 0.17 m solution of sodium phosphate using 800. mL water? • Solution: 0.17 mol/kg x .800 kg = 0.14 mol Molar mass of Na3PO4 =163.9 g/m 0.14 mol x 163.9 g/mol = 23g Na3PO4

  22. Molality example • How would you make 1200 g of a 0.235 m calcium chloride solution? • Solution: CaCl2: 111 g/mol • 1.200 kg = mass solvent + mass solute • mass solute = x • 0.235mol CaCl2 =x/111g/mol 1 kg solvent (1.200 kg – x) • Multiply both sides by 111 (111) (111)

  23. Molality example solution • 0.0261kg CaCl2 = x_____ 1 kg solvent (1.200 kg – x) (Note that the mass of the solute must be in kg) • .0261(1.200 – mass solute) = mass solute • .03132–.0261(mass solute) = mass solute • .03132/1.0261 = mass solute • = 0.0305 kg CaCl2 (30.5g)

  24. Mole Fraction • XA = nA/(nA + nB) • No unit (all units cancel) • Example. What is the mole fraction of HCl in concentrated hydrochloric acid (37%w/w)? 37% = 37g HCl/(37g HCl + 63g H2O) • Change all masses to moles (37/36.5)/(37/36.5 + 63/18) • XHCl = 0.22 (22% of the particles in concentrated HCl are hydrogen chloride, neglecting dissociation)

  25. Factors affecting solubility • Temperature • Increase in temperature usually means increased solubility for a solid or liquid solute. • Supersaturation • A solution carefully cooled below temperature where solute is soluble • Disturbing solution or adding seed crystal causes rapid crystallization with attendant evolution or absorption of heat • Gases become less soluble with increasing temperature.

  26. Factors affecting solubility • Nature of solute and solvent • Relative polarities (“like dissolves like”) • Temperature – higher temperature means higher solubility (solids) or lower solubility (gases) • Factors affecting rate of solution • Temperature – higher temperature means faster dissolving • Particle size – smaller particles mean faster solution • Stirring – stirring increases solution rate

  27. Factors affecting solubility • Pressure • Pressure does not affect the solubility of solid or liquid solutes. • Gases become more soluble with increasing pressure • Henry's Law: Gas solubility is directly related to pressure P = kC P = pressure of dissolved gas over solution k= constant characteristic of system C = concentration (solubility)

  28. Henry’s Law problem • A soft drink is bottled so that a bottle at 25ºC contains CO2 at a pressure of 5.0 atm over the liquid. Assuming that the partial pressure of CO2 in the atmosphere is 4.0x10-4atm, calculate the equilibrium concentration of CO2 in the soda both before and after the bottle is opened. The Henry's Law constant for CO2 in aqueous solution is 32 Latm/mol at 25ºC.

  29. Solution to Henry’s Law problem • Before opening: P = kC; k = 32 Latm/mol, and P = 5.0 atm. • So CCO2 = P/k = 5.0atm/32 Latm/mol = 0.16M • After opening: P = kC; k = 32 Latm/mol, and P = 4.0x10-4 atm. • So CCO2 = P/k = 4.0x10-4atm/32 Latm/mol = 1.3x10-5M

  30. Reactions in solution • Precipitates and ionic equations • Overall equation Pb(NO3)2(aq)+2KI(aq)PbI2(s)+2KNO3(aq) • Ionic equation Pb+2(aq)+2NO3‑(aq)+2K++2I‑(aq)PbI2(s)+2K++2NO3‑(aq) • Net ionic equation – eliminate spectator ions Pb+2(aq) + 2I‑(aq) PbI2(s)

  31. Reactions in solution • Other reactions may be driven by the formation of a gas. 2HCl(aq) + Na2CO3(aq) CO2(g) + H2O(l) + 2NaCl(aq) overall equation 2H++2Cl‑(aq)+2Na++CO3‑2(aq)CO2(g)+H2O(l)+2Na+ +2Cl‑(aq) ionic equation 2H+ + CO3‑2(aq)  CO2(g) + H2O(l) net ionic equation

  32. Reactions in solution • Write overall, ionic and net ionic equations for the following reaction. zinc metal reacts with hydrochloric acid to give aqueous zinc chloride and hydrogen gas Zn + 2HCl(aq)  ZnCl2 + H2 Zn + 2H+(aq) + 2Cl-(aq) Zn+2(aq) + 2Cl-(aq) + H2(g) Zn + 2H+(aq) Zn+2(aq) + H2(g)

  33. Reactions in solution • Reactions can also be driven by formation of a complex, usually brightly colored. Cu2+(aq ) + 4 NH3(aq ) Cu(NH3)42+(aq ) 0.1M Cu(II) 0.1M Cu(II) with ammonia added

  34. Reactions in solution • Iron solutions form a complex with thiocyanate (SCN-) Fe+3 + SCN- FeSCN+2 0.1M Fe+3 with thiocyanate added 0.1M Fe+3

  35. Reactions in solution • Formation of a small covalent molecule will also drive a reaction. 2KOH(aq) +H2SO4(aq) K2SO4(aq) +H2O • Use the solubility table (Appendix D) to decide how to write reaction equations for precipitation reactions. • K2S(aq) + Pb(NO3)2(aq) • NaOH(aq) + CuSO4(aq) PbS(s) + 2KNO3(aq) Na2SO4(aq)+Cu(OH)2(s)

  36. Colligative properties • From Latin “colligare”, to bind together • Colligative properties depend on the number of solute particles present • Molecular substances give one mole of particles per mole substance • Salts give more than one mole particles per mole substance because of dissociation • Number of particles per formula unit = i (van’t Hoff factor)

  37. Colligative properties • Vapor pressure lowering • Solute particles take the place of some of the solvent particles at the surface • Vapor pressure of liquid is lowered by presence of a solute • Extent of lowering depends on number of solute particles present

  38. Colligative properties • Boiling point elevation • Solutions have higher boiling points than pure solvents. This is true with solid solutes and heavier liquid solutes. • Other liquid solutes may form azeotropes, which are mixtures with lower boiling points than either solute or solvent – example 95% ethanol/water.) • Solutes raise the boiling point of liquids because they lower the vapor pressure. When Pv = Pa, vaporization (boiling) occurs.

  39. Colligative properties • Boiling point elevation depends on the number of particles present. (van't Hoff factor, i) • Sodium chloride elevates the bp of water twice as much per mole as sucrose, for it makes two particles per mole. (i = 2 for dilute solutions) NaCl Na+ + Cl-

  40. Colligative properties • Freezing point depression • Solutes lower the freezing point of liquid solvents. Solutes interfere with solvents’ ability to associate as a solid and crystallize. • Freezing point depression also depends on number of particles. • Osmosis and osmotic pressure • Solutions of different concentrations on either side of a semi-permeable membrane exert a net pressure toward the more concentrated solution

  41. Colligative properties • Solvent moves so as to dilute the more concentrated solution. Osmotic pressure is the pressure exerted by the greater height of solution on the concentrated side.

  42. Colligative properties • Reverse osmosis is used to purify water.

  43. Colligative properties • Calculations • Colligative property calculations use molality as the unit of concentration, for it does not depend on volume. • Colligative properties vary directly with concentration. • BP elevation: • Tb = ikbm, where kb = the boiling point elevation constant for that liquid.

  44. Colligative properties • kb for water is 0.51ºC/molal • FP depression: • Tf = ikfm • kf for water is 1.86ºC/molal • Compare the freezing points of 1.5 molal aqueous solutions of NaCl and CaCl2. • NaCl: Tf = (2)1.86ºC/m (1.5m) = 5.6ºC. FP = - 5.6ºC • CaCl2: Tf = (3)1.86ºC/m (1.5m) = 8.4ºC FP = - 8.4ºC

  45. Colligative properties • Molecular weight calculations • Solving for molality can yield the molecular weight of a substance if the mass is known. • Example. 1.235 g of a molecular substance dissolved in 100.0 g benzene lowers the freezing point of benzene by 0.468ºC. What is the molecular weight of the substance? kf for benzene is 5.12 ºC/molal.

  46. Colligative properties • Solution: Tf = ikfm m = mol/Kg solvent; mol = mass/mm Tf = ___ikfmass___ (mm)(Kg solvent) mm = ___ikfmass___ (Tf)(Kg solvent) mm = _(1)(5.12ºC/m)(1.235g)____ = 135g/mol (0.100Kg benzene)(0.468ºC)

  47. Nonhomogeneous mixtures • Suspensions • Particles larger than 103 nm (1 m or 10-6 m) • Particles will settle out on standing • Often opaque • Examples: paint, muddy water, orange juice • Colloids • Particles between 1 nm and 1m • Particles will not settle out on standing

  48. Nonhomogeneous mixtures • May appear clear, but exhibits Tyndall effect • Examples: fog, blood, milk, soapy water

More Related