1 / 29

Objectives

Objectives. Heat transfer Convection Radiation Fluid dynamics Review Bernoulli equation flow in pipes, ducts, pitot tube. T out. T in. R i / A. R o / A. R 1 / A. R 2 / A. T out. T in. T in. T out. Add resistances for series Add U-Values for parallel. l 1. l 2. k 1, A 1.

kiara
Download Presentation

Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Objectives • Heat transfer • Convection • Radiation • Fluid dynamics • Review Bernoulli equation • flow in pipes, ducts, pitot tube

  2. Tout Tin Ri/A Ro/A R1/A R2/A Tout Tin

  3. Tin Tout • Add resistances for series • Add U-Values for parallel l1 l2 k1, A1 k2, A2 (l1/k1)/A1 R1/A1 (l2/k2)/A2 R2/A2 A2 = A1 k3, A3 (l3/k3)/A3 R3/A3 l thickness k thermal conductivity R thermal resistance A area l3

  4. Convection and Radiation • Similarity • Both are surface phenomena • Therefore, can often be combined • Difference • Convection requires a fluid, radiation does not • Radiation tends to be very important for large temperature differences • Convection tends to be important for fluid flow

  5. Forced Convection • Transfer of energy by means of large scale fluid motion In the following text: V = velocity (m/s, ft/min) Q = heat transfer rate (W, Btu/hr) ν = kinematic viscosity = µ/ρ (m2/s, ft2/min) A = area (m2, ft2) D = tube diameter (m, ft) T = temperature (°C, °F) µ = dynamic viscosity ( kg/m/s, lbm/ft/min) α = thermal diffusivity (m2/s, ft2/min) cp = specific heat (J/kg/°C, Btu/lbm/°F) k = thermal conductivity (W/m/K, Btu/hr/ft/K) h = convection or radiation heat transfer coefficient (W/m2/K, Btu/hr/ft2/F)

  6. Dimensionless Parameters • Reynolds number, Re = VD/ν • Prandtl number, Pr = µcp/k = ν/α • Nusselt number, Nu = hD/k • Rayleigh number, Ra = …

  7. k = thermal conductivity (W/m/K, Btu/hr/ft/K) ν = kinematic viscosity = µ/ρ (m2/s, ft2/min) α = thermal diffusivity (m2/s, ft2/min) µ = dynamic viscosity ( kg/m/s, lbm/ft/min) cp = specific heat (J/kg/°C, Btu/lbm/°F) k = thermal conductivity (W/m/K, Btu/hr/ft/K) α = thermal diffusivity (m2/s) What is the difference between thermal conductivity and thermal diffusivity? • Thermal conductivity, k, is the constant of proportionality between temperature difference and conduction heat transfer per unit area • Thermal diffusivity, α, is the ratio of how much heat is conducted in a material to how much heat is stored • α = k/(ρcp) • Pr = µcp/k = ν/α

  8. Analogy between mass, heat, and momentum transfer • Schmidt number, Sc • Prandtl number, Pr Pr = ν/α

  9. ReL = Reynolds number based on length Q = heat transfer rate (W, Btu/hr) ReD = Reynolds number based on tube diameter A = area (m2, ft2) L = tube length (m, ft) t = temperature (°C, °F) k = thermal conductivity (W/m/K, Btu/hr/ft/K) Pr = Prandtl number µ∞ = dynamic viscosity in free stream( kg/m/s, lbm/ft/min) µ∞ = dynamic viscosity at wall temperature ( kg/m/s, lbm/ft/min) hm = mean convection heat transfer coefficient (W/m2/K, Btu/hr/ft2/F) Forced Convection • External turbulent flow over a flat plate • Nu = hmL/k = 0.036 (Pr )0.43 (ReL0.8 – 9200 ) (µ∞ /µw )0.25 • External turbulent flow (40 < ReD <105) around a single cylinder • Nu = hmD/k = (0.4 ReD0.5 + 0.06 ReD(2/3) ) (Pr )0.4 (µ∞ /µw )0.25 • Use with care

  10. H = plate height (m, ft) T = temperature (°C, °F) Q = heat transfer rate (W, Btu/hr) g = acceleration due to gravity (m/s2, ft/min2) T = absolute temperature (K, °R) Pr = Prandtl number ν = kinematic viscosity = µ/ρ (m2/s, ft2/min) α = thermal diffusivity (m2/s) Natural Convection • Common regime when buoyancy is dominant • Dimensionless parameter • Rayleigh number • Ratio of diffusive to advective time scales • Book has empirical relations for • Vertical flat plates (eqns. 2.55, 2.56) • Horizontal cylinder (eqns. 2.57, 2.58) • Spheres (eqns. 2.59) • Cavities (eqns. 2.60) For an ideal gas

  11. Phase Change –Boiling • What temperature does water boil under ideal conditions?

  12. Reℓ = GDi/µℓ G = mass velocity = Vρ (kg/s/m2, lbm/min/ft2) k = thermal conductivity (W/m/K, Btu/hr/ft/K) Di = inner diameter of tube( m, ft) K = CΔxhfg/L C = 0.255 kg∙m/kJ, 778 ft∙lbm/Btu Forced Convection Boiling • Example: refrigerant in a tube • Heat transfer is function of: • Surface roughness • Tube diameter • Fluid velocity • Quality • Fluid properties • Heat-flux rate • hm for halocarbon refrigerants is 100-800 Btu/hr/°F/ft2 (500-4500 W/m2/°C) Nu =hmDi/kℓ=0.0082(Reℓ2K)0.4

  13. Condensation • Film condensation • On refrigerant tube surfaces • Water vapor on cooling coils • Correlations • Eqn. 2.62 on the outside of horizontal tubes • Eqn. 2.63 on the inside of horizontal tubes

  14. Radiation • Transfer of energy by electromagnetic radiation • Does not require matter (only requires that the bodies can “see” each other) • 100 – 10,000 nm (mostly IR)

  15. Blackbody • Idealized surface that • Absorbs all incident radiation • Emits maximum possible energy • Radiation emitted is independent of direction

  16. Radiation emission The total energy emitted by a body, regardless of the wavelengths, is given by: • Temperature always in K ! - absolute temperatures • – emissivity of surface ε= 1 for blackbody • – Stefan-Boltzmann constant A - area

  17. Q1-2 = Qrad = heat transferred by radiation (W, BTU/hr) F1-2 = shape factor hr = radiation heat transfer coefficient (W/m2/K, Btu/hr/ft2/F) A = area (ft2, m2) T,t = absolute temperature (°R , K) , temperature (°F, °C) ε = emissivity (surface property) σ = Stephan-Boltzman constant = 5.67 × 10-8 W/m2/K4= 0.1713 × 10-8 BTU/hr/ft2/°R4 Radiation Equations

  18. Short-wave & long-wave radiation • Short-wave – solar radiation • <3mm • Glass is transparent • Does not depend on surface temperature • Long-wave – surface or temperature radiation • >3mm • Glass is not transparent • Depends on surface temperature

  19. Figure 2.10 • α + ρ + τ = 1 α = ε for gray surfaces

  20. Radiation

  21. Combining Convection and Radiation • Both happen simultaneously on a surface • Slightly different temperatures • Often can use h = hc + hr

  22. Combining all modes of heat transfer

  23. Example of Conduction Convection and Radiation use: Heat Exchangers Ref: Incropera & Dewitt (2002)

  24. Shell-and-Tube Heat Exchanger Ref: Incropera & Dewitt (2002)

  25. Fluid Flow in HVAC components Fundamentals: Bernoulli’s equation Flow in pipes: • Analogy to steady-flow energy equation • Consider incompressible, isothermal flow • What is friction loss? [ft] [Pa]

  26. Pitot Tubes

  27. Summary • Use relationships in text to solve conduction, convection, radiation, phase change, and mixed-mode heat transfer problems • Calculate components of pressure for flow in pipes and ducts

  28. Any questions about review material? • Where are we going? • Psychrometrics • Psychrometric terms • Using tables for moist air • Using psychrometric charts • 7.1 – 7.5, 7.7

More Related