1 / 29

Pipeline Hydraulics

Pipeline Hydraulics. Importance. Irrigation hydraulics involves: The determination of the pressure distribution in the system The selection of pipe sizes and fittings to convey and regulate water delivery The determination of the power and energy requirements to pressurize and lift water.

kinsey
Download Presentation

Pipeline Hydraulics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pipeline Hydraulics

  2. Importance Irrigation hydraulics involves: • The determination of the pressure distribution in the system • The selection of pipe sizes and fittings to convey and regulate water delivery • The determination of the power and energy requirements to pressurize and lift water

  3. Basic Relationships • Q = Vm Af • Flow rate = (velocity) x (cross-sectional area) • Called the continuity equation • Units must be consistent • Maximum recommended V in a pipeline is about 5 feet/second

  4. Maximum Flow Rates in Pipelines

  5. Energy • Forms of energy available in water • Kinetic energy due to velocity • Potential energy due to elevation • Potential energy due to pressure

  6. Units • Energy per unit weight of water = "head“ Energy (ft-lb)/Weight (lb) = Head (ft) • Velocity head; Elevation head; Pressure head • Length units (e.g., feet, meters) 

  7. Velocity Head • Velocity head = • g = gravitational constant = 32.2 ft/s2 • when V is 5 ft/s, V2/(2g) is only about 0.4 ft (usually negligible)

  8. Elevation Head • Elevation head (gravitational head) = Z • Height of water above some arbitrary reference point (datum) • Water at a higher elevation has more potential energy than water at a lower elevation

  9. Pressure Head • Pressure = force per unit area (e.g., pounds per square inch) • Pressure head = pressure per unit weight of water • h = P /  • h = pressure head , P = pressure •  = weight of a unit volume of water •  = 62.4 lb/ft3 = 0.433 psi/ft • 1/  = 2.31ft/psi • h = 2.31*P (P is in psi; h in ft)

  10. Calculate P at the Bottom of a Column of Water When depth of 2 ft is considered V = 2 ft3 W = 2 ft3 * 62.4 lb/ft3 = 124.8 lb A = 144 in2 P = W/A = 124.8lb / 144 in2 = 0.866 lb/in2 If depth is 1ft then V = 1 ft3 W = 62.4lb P = 62.4lb/144in2 = 0.433lb/in2

  11. Calculate P at the Bottom of a Column of Water V = 2 ft3 W = 124.8 lb A = 2ft2 = 288 in2 P = 124.8lb / 288in2 = 0.433 lb/in2 The area of a pond or tank does not affect pressure. Pressure is a function of water depth only.

  12. Manometer Rising up From a Pipeline Pressure, P = lb/ft2 γ = specific weight of water, (62.4 lb/ft3) H=P/g

  13. hydraulic head, H = • Bernoulli’s equation (conservation of energy) • H1 = H2 + hL • H1 = hydraulic head at point 1 in a system • H2 = hydraulic head at point 2 in a system • hL= head loss during flow from point 1 to point 2 (hL is due to friction loss)

  14. Components of Hydraulic Head for Pipeline With Various Orientations hL

  15. Components of Hydraulic Head for Pipeline With Various Orientations Contd… hL

  16. Components of Hydraulic Head for Pipeline With Various Orientations Contd… hL

  17. Friction Loss • Description: • energy loss due to flow resistance as a fluid moves in a pipeline • Factors affecting • flow rate • pipe diameter • pipe length • pipe roughness • type of fluid

  18. Ways of Calculating Friction Loss • Equations • Hazen-Williams is one of many (eq’n 8.8) • Tables • for a given pipe material, pipe diameter, and flow rate, look up values for friction loss in feet per hundred feet of pipe •  SDR = standard dimension ratio = pipe diameter  wall thickness

  19. Dimensional Comparison of Sch. 40, Class 160, and Class 125 PVC Pipe

  20. Friction Loss for IPS PVC Pipe IPS: Iron Pipe Size (same dimensions as steel pipe of same nominal size)

  21. Friction Loss for IPS PVC Pipe cont’d…

  22. Example Problem A 4-inch nominal diameter PVC pipe has a outside diameter of 4.5 inches and a wall thickness of 0.173 inches. What is the pipe SDR? Solution: SDR = Diameter/Wall Thickness SDR = 4.50/0.173 = 26.0

  23. Pipes With Multiple Outlets • lower friction loss because V decreases with distance down the pipe (Q decreases as flow is lost through the outlets; V=Q/A) • first calculate friction loss as if there were no outlets, and then multiply by the "multiple outlet factor", F

  24. Multiple Outlet Factors for Laterals With Equally Spaced Outlets of the Same Discharge

  25. Example Problem A 2-inch diameter, SDR 21 PVC pipe carries a flow of 60 gpm. The flow is discharged through 15 sprinklers evenly spread along its 600-ft length. What is the total head loss in the pipe? Solution: Hf = 4.62 ft / 100 ft (Table 8.2) Hf = 4.62 * 600 ft / 100 ft = 27.72 ft F = 0.379 (Table 8.3; 15 outlets) Hf = 27.72 ft * 0.379 = 10.51 ft

  26. “Minor” Losses • Source of minor losses • fittings, valves, bends, elbows, etc • friction, turbulence, change in flow direction, etc • hm = head loss in fitting (ft) • K = resistance coefficient for fitting

  27. Resistance Coefficient H for Use Determining Head Losses in Fittings and Valves

  28. Calculation Shortcuts • V in ft/s • Q in gpm • D in inches (INSIDE diameter) • hm in ft • Q in gpm • D in inches (INSIDE diameter)

  29. Example Problem A 4-inch pipe carries a flow of 160 gpm. How much head loss occurs when the flow passes through a 90o elbow (flanged, regular radius) ? Solution: K = 0.31 (Table 8.4: 4-in, regular 90o elbow) D = 4.0 inches

More Related