50 likes | 454 Views
KOHLER Continuous Two-drum Surface Winder. Kohler Two-drum Winder. Features: • Winds on 3 inch (75mm) or larger cores • New Core Accelerator • Advanced Cut Knife System cuts within 2 inches (50mm) of the core • Large Diameter – 23¾ inches diameter drums
E N D
Kohler Two-drum Winder • Features: • •Winds on 3 inch (75mm) or larger cores • •New Core Accelerator • •Advanced Cut Knife System cuts within 2 inches (50mm) of the core • •Large Diameter – 23¾ inches diameter drums • •Airshafts retained by Fail-Safe Locking Clamps at all times • •Cross-Machine Timing of Moving Components by Rugged Anti-Backlash Gearing • •Integral Suction Roll for Web Stabilization
Kohler Two-drum Winder Features: •Individual Motor Drives for each drum •Programmable Torque and Hold Down Loading Relative to Diameter •Offset Drums for better Winding Characteristics •Dual Hold Down Roll Systems •Load Cells for Tension Feed •Massive Rectangular Tube Side Frames •Precision Bearings and Machine Tool Slides used throughout
Kohler Two-drum Winder Benefits: •Tightly Wound Concentric Rolls •+/- 0.030 inch (0.75mm) Edge Control •Tail is 3 inches (75mm) or less, cut cleanly and folded back evenly on turn up •Winder is not Tension Limited – can pull up to 20 PLI (3.6kg/cm) even during transfer to new core. •Can wind finished, slit rolls without rewinding
Kohler Two-drum Winder Options: •Semi-Automatic Shaft Handling Equipment •Inline Slitting and/or Edge Trim •Dual Spreader Rolls CSI KOHLER COATING 10995 Wright Road NW Uniontown, OH 44685 Phone: (330) 499-1407 • FAX: (330) 499-6617 E-mail: info@kohlercoating.com • Web Site: www.kohlercoating.com