1 / 9

GLAST Large Area Telescope: Mechanical Systems Peer Review March 27, 2003

Gamma-ray Large Area Space Telescope. GLAST Large Area Telescope: Mechanical Systems Peer Review March 27, 2003 Section 2.2 – Budgets & Metrics Leonard Lee SLAC Systems Engineer lhlee@slac.stanford.edu. Topics. Agenda Allocated budgets (mass, c.g.,power) Drawing and Procedure Metrics

kitra-jordan
Download Presentation

GLAST Large Area Telescope: Mechanical Systems Peer Review March 27, 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gamma-ray Large Area Space Telescope GLAST Large Area Telescope: Mechanical Systems Peer Review March 27, 2003 Section 2.2 – Budgets & Metrics Leonard Lee SLAC Systems Engineer lhlee@slac.stanford.edu

  2. Topics Agenda • Allocated budgets (mass, c.g.,power) • Drawing and Procedure Metrics • Mechanical Subsystem drawing tree • Status of major assemblies, critical component drawings, and procedures • Document status

  3. LAT Metrics: Allocated Mass Budget March 2003

  4. Mechanical Subsystem Mass Budget

  5. Mechanical Systems Power Budget Condition Power Mode Allocation LAT “On” Radiator VCHP Heater Power <48 watts Mechanical Systems Power”On”= 48 watts Survival Heater Peak Power <350 watts LAT “Off” Orbit-Average Survival Heater Power <300 watts@27 Volts min Orbit-Average Survival Heater Power <350 watts@29 Volts max Mechanical Systems Power”Off”= 300-350 watts(27-29 volts)

  6. Drawing Tree

  7. Status of major assemblies, critical component drawings, and procedures

  8. Document Status

  9. End of Section 2.2

More Related