PJ2T Standard CW Keying Configurations 20 August 2007 Updated 15 October 2010

1. USB Stereo Phone Plug Key 1 RCA RCA RCA PC USB Winkeyer USB FT-1000 or FT-2000 rear “Key” jack Paddle Mini StereoPlug or 056 A1A R-Type OFF or RCA WinkeyerConfiguration RCA RCA 1 ft cable FT-2000front key jack Logikeyer 056 A1A F-Type ELE Stereo Phone Plug RCA RCA RCA PC LPT1Adapter FT-1000 or FT-2000 rear “Key” jack FT-2000front key jack 056 A1A F-Type ELE 056 A1A R-Type OFF RCA Paddle RCA RCA ManualConfiguration or 1 ft cable Logikeyer Mini StereoPlug • NOTES • At Station # 1, shifting to “Manual” configuration requiressacrificing the LPT1 port from the band decoder to the LPT1 adapter and informing Writelog of this change. • For LPT1 adapters with hardwired cables instead offemale phono jacks, use a double female adapter onthe end used to connect to what was previously theWinkeyer phono plug. Tape the adapter on and keep thecable stored with the LPT1 adapter. • The Omni VI, IC-765, FT-100, and FT-2000 require adaptersfor the paddle to a large phone plug. Also, adapters will beneeded so that the Yaesu large “Key” phone plug can be plugged into a mini stereo jack. • All keyers and keying assets and adapters will be stored together in a blue box. • OBJECTIVES • “Winkeyer Configuration” Have Winkeyer capabilityavailable at all stations and also a Logikeyer at allstations so we can do CW without the computerrunning and for those preferring to send with theLogikeyer. • “Manual Configuration” Have the ability to quickly revert to the basic of a Logikeyer at each station with PC keying via an LPT1 adapter. PJ2T Standard CW Keying Configurations 20 August 2007Updated 15 October 2010