Anglicky v odborných předmětech "Support of teaching technical subjects in English “

1. Anglicky v odborných předmětech"Support ofteachingtechnicalsubjects in English“ Tutorial: Engineeringmetrology Topic:Metrology terminology Preparedby:Ing. Pavel Rožek Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002 je spolufinancován Evropským sociálním fondem a státním rozpočtem České republiky.

2. Metrology terminology

3. Terminology in metrology is used to communication in branch metrology. • International dictionary of basic and general terms in metrology (ČSN 01 0115) divides into 6 chapters: • Quantities and units • Measuring • Measuring results • Gauges • Gauges´ characteristics • Etalons (Standards)

4. There are mentioned only the most common and frequently used terms: • ( Measurable) quantity Effect´s, body´s or material´s quality which is possible to quantitatively distinguish and qualitatively determine • Unit (measuring) Specifically determined quantity which is defined and accepted by convention, that other similar quantities are compared with in order to expressing their values in relation to this quantity

5. (Measuring) unit’s sign Conventional sign for unit (measuring) marking • Measuring Set of activities whose aim is to determine quantity value • Metrology Science dealing with meaning • Measuring principle Scientific measuring base

6. Measuring method Logical sequence of generically following consecutively described activities which are used to measuring • Measuring order Set of specifically described activities which are used at specified measurings up to given measuring method • Measuring result Value gained by measuring attributed to measured quantity

7. Measuring accuracy Consensus closeness between measuring result and the real measured unit value • Measuring uncertainty Parameter affiliated to measuring result which characterises values ´ scattering • Meter Equipment used to measuring – individual or in linkage with additional device (equipment)

8. Measuring system Complete set of meters and other equipment which is assembled to specific measuring • Sensor Meter or chain component that measured quantity impacts on • Justification (of meter) Activity consisting in making meter functional suitably for its usage

9. Meter adjusting Adjustment performed only with usage of accessible devices • Measuring range Set of measured values where it is assumed that meter’s error is lying in the range of specified limit values • Sensitivity Ratio of output signal change of meter and corresponding input signal

10. Stability Meter ability to keep its metrology characteristics constant depending on time • Meter accuracy Meter ability to provide output signals close to real value • Standard Embodied size, meter,gauge, referential material or measuring system, which are used to defining, realizing, keeping or reproducing of unit of one or more quantity values to referential purpose usage

11. International standard Etalon certified by international contract to be used in international extent as base for other standards material quantity setting • Primary standard Standard which is accepted as etalon the highest metrological quality and its value is accepted without any contact to other standards for the same quality

12. Secondary standard Etalon whose value is set by comparing with primary standard for the same quantity • Working standard Etalon which is commonly used for calibration or embodied sizes, meters or referential materials´ checking

13. Question 1: What meaning doesthe terminology in metrologyhave? Question 2: Name and describe the standard types.

14. Literature • 26. úvodní kurz METROLOGIE: K 381-07. 2007. Česká metrologická společnost: ČMS, Praha 1. Translation: • www.seznam.cz • www.slovnik.cz • JANATA, Petr. Handy slovník technický anglicko-český a česko-anglický. Plzeň: Nakladatelství Fraus, 2000. ISBN 80-7238-075-3 • Lingea LEXIKON 5, Technický slovník anglicko-český a česko-anglický. 2010.