1 / 19

A&WMA 2011 Annual Conference Waste vs. Resource Carl Eldred Hopping Green & Sams Tallahassee

A&WMA 2011 Annual Conference Waste vs. Resource Carl Eldred Hopping Green & Sams Tallahassee. Overview. Waste vs. Resource, from a U.S. regulatory perspective. Regulations are intended to promote recycling, but often times have the opposite effect. We are going to look at:

ktim
Download Presentation

A&WMA 2011 Annual Conference Waste vs. Resource Carl Eldred Hopping Green & Sams Tallahassee

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A&WMA 2011 Annual Conference Waste vs. Resource Carl Eldred Hopping Green & Sams Tallahassee

  2. Overview • Waste vs. Resource, from a U.S. regulatory perspective. • Regulations are intended to promote recycling, but often times have the opposite effect. • We are going to look at: • Recycling of Hazardous Wastes. • Combustion of non-hazardous secondary materials.

  3. Background • Hazardous Waste Regulation. • Hazardous waste is primarily regulated at the federal level under the Resource Conservation and Recovery Act (“RCRA”). • RCRA was created to • “reduce the amount of waste and salvageable materials and to provide for proper and economical solid waste disposal practices.” 42 U.S.C. §6901. • “promote the protection of health and the environment and to conserve valuable material and energy resources.” 42 U.S.C. §6902.

  4. What is a Hazardous Waste? • Hazardous waste is a subset of solid waste. • A solid waste is defined as any “discarded material.” • A “discarded material” is defined to include materials that are abandoned, or recycled. • A solid waste may be subject to extensive hazardous waste regulations if it is a “listed waste” or if it exhibits one of the following characteristics: toxicity, corrosivity, ignitability, reactivity).

  5. Prohibited Recycling Activities • Use constituting disposal • Burning for energy recovery or producing a fuel. • Speculative accumulation.

  6. Waste or Resource? • Howmet v. EPA, 614 F.3d 544 (D.C. Cir. 2010) • Howmet used a corrosive KOH solution (liquid potassium hydroxide) to clean ceramic core from metal casings produced for aerospace and industrial gas turbine applications. • The used KOH was sent to another company, Royster, who reclaimed it by adding it to its fertilizer to control pH and to provide a source of potassium. • EPA claimed that Howmet violated RCRA by failing to manage the KOH as a hazardous waste and for failing to prepare hazardous waste manifests for the shipments.

  7. Waste or Resource? • Question before the court – was the KOH a spent material, i.e, a material that has been used and as a result of contamination can no longer serve the purpose for which it was produced without processing? • Court upheld EPA’s determination that the KOH was a spent material. • Court also found that the use of the KOH to make fertilizer was a “use constituting disposal.”

  8. Waste or Resource? • EPA Guidance • Company uses solvents to clean circuit boards. After a while, the solvents can no longer be used to clean circuit boards due to contamination. Another company purchases the solvents and uses them as a metal degreaser. Is the solvent generated by the circuit board manufacturer a waste or resource? • Semiconducter industry uses ultra-pure concentrated sulfuric acid (95-97%) to clean silicon wafers before they are etched. During use, acid becomes diluted and picks up small particles from the wafers. At 80% the sulfuric acid is too dilute for continued use. Can the used sulfuric acid be used as an ingredient to produce reagent grade sulfuric acid (50%)? • What if it was used to produce a fertilizer?

  9. EPA Re-Definition of Solid Waste • In 2008 EPA published its redefinition of solid waste that was intended to: • Promote resource conservation and sustainability by encouraging recycling and reuse of hazardous wastes. • By making recycling and reuse both cost effective and safe by streamlining the recycling regulations while ensuring materials are not discarded in a manner that is not protective of human health and the environment.

  10. EPA Re-Definition of Solid Waste • The final rule established three exemptions from hazardous waste regulation for hazardous secondary materials that are being legitimately reclaimed: • Under the Control of the Generator in Non-Land-Based Units • Under the Control of the Generator in Land-Based Units • Transferred for the Purpose of Legitimate Reclamation

  11. Legitimacy Criteria40 C.F.R § 260.43 • Material must provide a useful contribution to the recycling process or product, and the process must produce a valuable product or intermediate. • Useful contribution: • Contributes valuable ingredients. • Replaces a catalyst or carrier. • Is the source of a valuable constituent recovered in the recycling process. • Is recovered or regenerated by the recycling process. • Is an effective substitute for a commercial product.

  12. Legitimacy Criteria40 C.F.R § 260.43 • Valuable Product or Intermediate: • Sold to a third party, or • Is an effective substitute for a commercial product, as an ingredient, or as an intermediate in an industrial process.

  13. Legitimacy Factors40 C.F.R § 260.43 • Additional factors that must be considered: • Material should be managed as a valuable commodity. • The product does not contain: • Significant concentrations of listed hazardous constituents. • Elevated levels of listed hazardous constituents when compared to analogous products. • Exhibits a hazardous characteristic that analogous products do not exhibit.

  14. Non-Hazardous Secondary Materials • March 21, 2011, EPA promulgated the Identification of Non-Hazardous Secondary Materials that are Solid Waste rule to implement provisions of the Clean Air Act (“CAA”) related to solid waste combustion units. • Status of the rule is uncertain. On May 18, an industry coalition filed a petition with EPA seeking an administrative stay of the rule, in part due to EPA’s stay of the CISWI and Boiler MACT rules it was intended to implement. • In promulgating the rule, EPA was keen to distinguish materials that had been discarded.

  15. Waste or Resource? • EPA considers most non-hazardous secondary materials that are burned in combustion units to be solid wastes. • Limited exemptions: • Materials Within the Control of the Generator Used as Fuel • Materials Outside the Control of the Generator Used as Fuel • Scrap Tires Collected Under Established Tire Collection Programs • Materials Used as Ingredients, e.g., blast furnace slag, coal combustion residuals, and foundry sand. • Discarded Materials Processed to Produce Fuel or Ingredient Products

  16. Legitimacy Criteria40 C.F.R. § 241.1 • Recycling must be legitimate. • Fuel legitimacy criteria: • must be managed as a valuable commodity. • have a meaningful heating value and be used as a fuel in a combustion unit that recovers energy. • contain contaminants at levels comparable to or lower than those in traditional fuels which the combustion unit is designed to burn.

  17. Legitimacy Criteria40 C.F.R. § 241.1 • Ingredient legitimacy criteria: • must be managed as a valuable commodity • provide a useful contribution to the production or manufacturing process • produce a valuable product or intermediate • result in products that contain contaminants at levels that are comparable to or lower than those found in traditional products that are manufactured without the non-hazardous secondary material. • If the material was discarded in the first instance (i.e., disposed, abandoned, or thrown away) would remain a solid waste

  18. Conclusion • There are significant regulatory consequences flowing from whether a material is deemed a waste or a resource. • Determination based on various criteria. • Likely a waste when: • Abandoned or thrown away prior to reuse. • Reuse is not the same as the original use. • Contains additional constituents not found in the virgin material. • Provides marginal contribution to the process. • Likely a resource when: • Used in an ongoing process by the generator. • Managed as a valuable commodity. • Replaces the use of a virgin material. • Is effective.

  19. Questions? Carl Eldred Hopping Green & Sams 850-222-7500 celdred@hgslaw.com

More Related