3 ESSENTIAL TIPS WHILE INSTALLING A TRANSFORMER

1. 3 ESSENTIAL TIPS WHILE INSTALLING A TRANSFORMER Transformers are one very essential aspect of our everyday lives, as this equipment is responsible to help us so conveniently get electricity within our homes and offices. But, it is essential to ensure that the transformers get smoothly and correctly installed to ascertain proper electricity usage, and several years of service from the transformer. Following the best practices, while also taking safety precautions, is critical when installing a transformer. Thorough transformer inspection after delivery Even though a genuine transformer manufacturer will always check every aspect of the transformer before delivering it to the client, there could be damages caused during transportation. It is thus wise to check the transformer thoroughly for any such damages after accepting delivery. Any broken parts or loose connections must be checked for. Also, any contaminants like water, dirt, and moisture must be identified. If any signs of equipment mishandling or damage is encountered, a complained must be immediately filed. Strict adherence to manufacturer guidelines Depending upon the type and purpose, a transformer can be installed in several ways. For instance, a transformer to be installed at ground level will have a different process than one that needs to be installed on a concrete pad. Similarly, a transformer to be installed inside a facility will also have a different

2. process than one that needs to be installed outside. One thus needs to be aware of, and implement, the required procedures, along with following safety precautions, when installing a transformer. This, can be achieved successfully, when the manufacturer guidelines are thoroughly followed for each type of transformer installation. If not done as per the guidelines, it may lead to transformer damage, poor performance, weak and risky electrical connections, and at the worst, fire hazards or damage to your appliances. Essential precautions before setting the transformer live Once installed, you’re all set to go. But, hold on! There are certain essential precautions that need to be taken care of also before setting the transformer live. You must ensure that the grounding is in place, so that any static charges can be eliminated. Ensure that there are no breaks or gaps in the windings. The space requirements must be adhered to, which is specified by the manufacturer for installing cables. Every protection requirement specified by the manufacturer should also be followed. Also, perform an insulation resistance test to assess the transformer’s capability to accept the applied voltage. finally, conduct a final inspection of the transformer before sending it live and energizing the unit. To conclude, thorough inspection of the transformer after delivery, following the manufacturer’s guidelines, and taking care of every precaution before, during, and after the installation is essential for successful and error-free installation of any transformer. But even before that, comes the responsibility of purchasing the right kind of transformer. Never should one compromise on the quality of the transformer only for a mere sum of money. One mistake during the purchase can cause a huge mishap after installation. It is thus always advised to purchase any three phase or single phase transformer in India from a genuine manufacturer like Miracle Electronics. Here, every transformer manufactured is in accordance with international standards, thus ensuring quality and performance. You can thus get an efficient, high-performing, economical transformer here.