1 / 6

Open valve 1 so that the flow is from the reservoir to the pump head.

Close Valve 4 so flow is stopped. 5. 6. Priming the System. Make sure Valve 2 is open to vent air displaced by initial flow. 2. 3. 4. When Bubble Trap is 2/3 full close valve 2. 7. Close Valve 3 so flow is stopped. Turn On Pump. 8. 1.

kung
Download Presentation

Open valve 1 so that the flow is from the reservoir to the pump head.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Close Valve 4 so flow is stopped. 5 6 Priming the System Make sure Valve 2 is open to vent air displaced by initial flow. 2 3 4 When Bubble Trap is 2/3 full close valve 2. 7 Close Valve 3 so flow is stopped Turn On Pump. 8 1 Open valve 1 so that the flow is from the reservoir to the pump head.

  2. 5 Open Valve 4 so that flow is passed through the atrial cannula. 6 2 3 4 7 Set Valve 8 so that flow is directed to drain. 8 1

  3. 5 Open Valve 5 to allow air to vent. Close valve 6. 6 2 Change Valve 4 so that flow is Directed up to the aortic bubble trap.. 3 4 7 Close Valve 7 so that the aortic bubble trap can fill. 8 1

  4. When bubble trap is 2/3 full, close vent valve 5. 5 6 2 3 4 7 Open valve 7 and let flow pass through the aortic cannula and out to waste. 8 1

  5. Close valve 6 Open valve 6 so the flow is directed to the oxygenating chamber 5 6 Once the line is primed change valve 6 to direct the flow back to the reservoir. 2 3 4 7 Close valve 7 8 1

  6. Open valve 3 so the flow is directed to the oxygenating chamber 5 6 Once the line is primed change valve 3 to direct the flow back to the reservoir. 2 3 Close valve 3 4 7 Close valve 4 Turn off pump 8 1

More Related