5 Tips to Follow Before a Floor Installation: Melbourne Expert Advice

1. 5 Tips to Follow Before a Floor Installation: Melbourne Expert Advice When they are looking for a timber flooring installation, Melbourne based residents have a lot to think about. It’s tempting to focus on the exciting broad picture, but there are other smaller details that need to be addressed. As the installation day draws nearer there are essential tasks should be carried out to make the process easier. Here are five tips to get ready for a new floor installation. 1. Check the Delivery Once the floor and associated parts have been delivered the consignment must be checked. It’s vitally important to ensure that every plank and part is present. These parts also need to conform to the quality, appearance and moisture content promised. Do this as early as you can to make sure that you can identify and correct any problems before the installation day arrives. 2. Check and Store the Planks When the floor planks have been delivered, they need to be moved indoors immediately. The flooring planks should never be stored outdoors, and they should be laid flat somewhere that they can be easily accessed. Take some to open a few of the packs and look for any visible differences in colour or shape. If you notice anything unusual contact Kustom Timber as soon as possible, to get the issue resolved. 3. Check the Subfloor It’s important to check the condition of the subfloor and make sure that it’s level before the installation begins. The subfloor must meet the requirements set forward in the installation instructions. The subfloor verification process is not the responsibility of the installer, and it must meet the optimum standards. If any of these conditions aren’t met the situation must be rectified before the floor installation can take place. 4. Check the Floorplan The floorplan and any associated drawings or finishing details must be checked. All the materials must be ready and easy to handle, such as trims, caulk and stair noses. This will ensure that there are no last-minute errors that will cause the project to go awry. Deviating from the design at this stage is a sure recipe for a disaster, and it's extremely important that everyone involved is on the same page. Don’t be afraid to ask questions to ensure that all parties understand what is required. 5. Check the Humidity The humidity in your home should be an important factor that is considered throughout the entire floor installation process. This goes from the initial design, the manufacturing, and the installation. The humidity levels will always play a decisive role in how the installation proceeds and flooring should never be installed if the humidity is a problem. The moisture content of any concrete should also be checked

2. before the flooring installation goes ahead. If they are looking for a solid timber flooring installation Melbourne based homeowners and project managers should contact Kustom Timbers. Our expert team is standing by to discuss your needs in greater detail, and they can answer your remaining questions.