280 likes | 527 Views
New Hybrid IP PBX KX-TDA15. Panasonic Communications CO., (UK) LTD. “. TDA100. TDA30. TDA200. TDA15. March/2003. March/2003. Dec/2003. July/2004. TDA15. TDA15. TDA200. TDA100. TDA30. 8 + 4(VoIP4). Trunk. 128. 64. 12 + 4(VoIP). 20. Extension. 128/256(Ver.1.1).
E N D
New Hybrid IP PBXKX-TDA15 Panasonic Communications CO., (UK) LTD. “
TDA100 TDA30 TDA200 TDA15 March/2003 March/2003 Dec/2003 July/2004 TDA15 TDA15 TDA200 TDA100 TDA30 8 + 4(VoIP4) Trunk 128 64 12 + 4(VoIP) 20 Extension 128/256(Ver.1.1) 64/128(Ver.1.1) 28/52(Ver.1.1) 2 BRI Ports CO 0 0 0 DHLC-4 Extension 0 0 DHLC-4 Hybrid IP-PBX KX-TDA Series and Plan V1.0 Networking(QSIG), Call Center, VoIP Gateway, CTI (CSTA/TAPI), T76xx Line Up V1.1 Digital XDP, DECT CS to D-PT Port. V2.0 Extension IP Support, Hotel Features (TDA100/200 Ver.2.0) Port Max. Initial Configuration “
“ SOHO Solution Small & Powerful Hybrid IP PBX KX-TDA15 • Inherent TDA100/200/30 Features - ICD-Group - DISA - D-XDP Feature • TDA30 Ver.1.1 Features are provided • Pre-install: BRI 2 and Caller ID Card Cost effective model for ISDN-SOHO Market
Remote Programming System Connection PSTN/ISDN ISDN Analog Private Network Branch Analog/BRI BRI External I/O Device(V2.0) (Sensor/Relay) CO Trunk IP Network VoIP Card Door Phone/Door Opener Battery PC Console/Phone Option I/F CTI Client New DPT USB D-PT I/F CS LAN New DPT DXDP CTI Server USB USB/PT-USB XDP Modem PC Programming APT/SLT T72/T74/T75/T76 Voice Mail MOH ISDN Tele. EPG Input/Output Terminals ISDN S0 Bus “ 0
“ Resources TDA15/30 Resources TDA15/30/100/200 TDA100/200 MOH Port 1 Tenant 8 2 Pager Port 1 COS 64 2 Trunk group 64 DSS/PC Console 4/2 8/8 Ext. use group 32 PC Phone 12/24 64/128 Paging group 32 Doorphone 4 8/16 PS ring group 32 Door opener 4 8/16 Call pick up group 64 DISA Ports 4 8/16 Idle Ext. Hunting-G 64 (16 Ext./G) OGM 32 64/64 ICD-Group 64 (32 Ext./G) CS 2/8 16/32 Queuing time table 64 PS 28 64/128 VM (DTMF) 2 (32 Ext./G) VM Unit 1 2 Ext. Number digits 1-4 Port (Ch) 4 (8ch) 12 (24ch) Call park area 100 MSG waiting Log. 128 256 Conference 3x10 or 8x4 SMDR Buffer 100 200 System Capacities / Resources -1 Trunk - Max.8 = ISDN 2 ports (Pre-installed) + Analog 2 (Max.) + ISDN 2 ports (Max.) - IPGW : 1 x 4ch Extension Ports - D-PT : Max.16 = D-PT + A-PT + DSS + VM (D-PT) + CS (TDA0141) - SLT : Max.12 = SLT + VM (DTMF)
“ Resources TDA15/30/100/200 Resources TDA15/30/100/200 Verified user code 4 digits x 1000 Toll Restriction level 7 Verified code PIN 10 digits x 1000 Denied Code 16digitsx100/level Special carrier code 16 digits x 20 Exception Code 16digitsx100/level Host access code 10digitsx10/TRG Charge Rate 8 digits DDI table 32 digits x 1000 Denomination 3 Emergency dial 32 digits x 10 Call Log (Outgoing) 100/Ext. Quick dial 4 digits x 80 Call Log (Incoming) 100/Ext. System speed dial 32 digits x 1000 Pick up dial 32 digits Redial 32 digits ARS plan 16 Leading digit 16 digits x 1000 Excepted leading 16 digits x 200 ARS Carrier 10 TIE Routing Table 32 Leading digits 3 PBX Code 7 System Capacities / Resources -2
“ TDA15 TDA30 CO Built-in CO 4 (2 BRI) 0 Max. BRI CO 8 (4 BRI) 12 (6 BRI) Max. Analogue CO 2 CO 12CO Total CO 8 12 Extension Built-in 12 (DHLC-4) 12 (DHLC-4) Max. SLT 12 24 Max. DPT 16 24 (V1.0) 48 (V1.1 w.MEC) Total 20 28 (V1.0) 52 (V1.1 w.MEC) IP IP Trunk 4 4 Option Extension Caller ID Yes (Built-in) Yes (Optional) Analogue Modem No Yes (Optional) Memory Expansion No Yes (Optional) 2nd AC Power Unit No Yes (Optional) Battery Back up Interface No Yes Power Failure Transfer No Yes Differences from TDA30
“ BRI-1 KX-TDA3283 - 1 Port ISDN BRI Card - CO/Extension (Programmable) - RJ-45 x 1 - Power failure port is not supported. Max.1 BRI-2 KX-TDA3280 - 2 Port ISDN BRI Card - CO/Extension (Programmable) - RJ-45 x 2 - Power failure port is supported. Max.1 LCOT-2 KX-TDA3183 - 2 Port Analog CO Card - RJ-45 x 2 - Power failure port is supported. - Line polarity reverse detection. - CPC is not supported. - Caller ID option is not supported. Max.1 IPGW-4 KX-TDA3480 - 4ch IPGW Card - G729a/G723.1/G711 - T.38 : Not supported - Physical i/f: 10/100 Base-T - Web programming (English) Max.1 System Hardware for TDA15 -1 Trunk Cards Note : All cards for TDA15 are NOT hot swappable
“ DLC-8 KX-TDA3172 - 8 Port D-PT Card - D-PT / DSS / CS / VM (D-PT) - DXDP is not supported on TDA15 Max.1 SLC-8 KX-TDA3174 - 8 Port SLT Card - 8 DTMF receiver - + 40V Line feed Max.1 System Hardware for TDA15 -2 Extension Cards Note : DLC-4 and SLC-4 are not supported Note : All cards for TDA15 are NOT hot swappable
“ MSG-2 KX-TDA3191 - 2 Port Message/DISA Card - OGM Max. 8min, 32messages Max.2 DPH-4 KX-TDA3161 - 4 Port Doorphone Card - Doorphone for T30865 - 4 Door Opener - 4 External Relay Output (Ver.2.0) - 4 External Sensor Input (Ver.2.0) Max.1 DPH-2 KX-TDA3162 - 2 Port Doorphone Card - Doorphone for Germany Type - 2 Door Opener - 4 External Relay Output (Ver.2.0) - 4 External Sensor Input (Ver.2.0) Max.1 Echo-8 KX-TDA3166 - 8 Port Echo Cancelling Card Max.1 System Hardware for TDA15 -3 Same As TDA30 Optional Cards Note : All cards for TDA15 are NOT hot swappable
Card TDA15 TDA30 TDA100/200 Card TDA30 TDA30 TDA100/200 LCOT-2 TDA3183 TDA3183 - DHLC-8 - - TDA0170 LCOT-4 - TDA3180 TDA0183 DLC-4 - TDA3171 - LCOT-8 - - TDA0180 DLC-8 TDA3172 TDA3172 TDA0171 LCOT-16 - - TDA0181 DLC-16 - - TDA0172 E&M - - TDA0184 SLC-4 - TDA3173 - E1 - - TDA0188 SLC-8 TDA3174 TDA3174 TDA0173 CID/PAY8 - - TDA0189 SLC-16 - - TDA0174 CID (CO) - TDA3192 TDA0192 MSLC-16 - - TDA0175 BRI-1 TDA3283 - - CS I/F - - TDA0144/0143 BRI-2 TDA3280 TDA3280 - BRI-4 - TDA0284 OPB-3 - - TDA0190 BRI-8 - - TDA0288 DPH-4 TDA3161 TDA3161 TDA0161 PRI-30 - - TDA0290 DPH-2 TDA3162 TDA3162 TDA0162 IPGW-4 TDA3480 TDA3480 TDA048X Echo TDA3166 TDA3166 TDA0166 RTM - TDA3196 TDA0196 MSG TDA3191 TDA3191 TDA0191 Ext. CID Pre-ins TDA3168 - CTI-LINK - - TDA0410 System Comparison TDA15 & TDA30/100/200 Extension/Other Trunk “
“ Maximum Cabling Distance Same As TDA30 ø0.4mm 500m ø0.5mm 720m (CAT5) ø0.6mm 830m - T76xx Series - T7550/T7565 ø0.4mm 140m ø0.5mm 229m (CAT5) ø0.6mm 360m - Other D-PT/A-PT - All DSS ø0.4mm 698m ø0.5mm 1128m (CAT5) ø0.6mm 1798m SLT ø0.4mm 227m ø0.5mm 347m (CAT5) ø0.6mm 500m TDA0141(CS) 5m USB Point to Point 1000m (CAT5) Point to Multi-Point 150m (CAT5) ISDN Terminal ISDN S0 Bus 5m USB Terminal USB USB Terminal
“ - Doorphone (Max.1) - MSG (Max.2) - Echo chancel (Max.1) - BRI-1 (Max.1) - BRI-2 (Max.1) - LCOT-2 (Max.1) - DLC-8 (Max.1) - SLC-8 (Max.1) - IPGW-4 (Max.1) SD Card Holder USB EPG RS232C Reset S/W MOH DHLC-4 (Fixed) Clear S/W Power S/W Battery Backup is not provided. AC Power Adapter Additional AC Adapter is Not used. View Front S-11 S-4 S-7 S-10 S-3 S-6 S-9 S-5 S-8 S-2 Caller ID Card BRI-2 S-1 Rear
“ Slot CO Trunk Pre-ins CO-1 CO-2 IPGW BRI Analog Total 6 1 BRI-2 BRI-2 - - - - Yes - 4 4 0 0 8 4 2 7 BRI-2 BRI-2 BRI-1 BRI-1 - - - Yes 6 6 0 0 10 6 8 3 BRI-2 BRI-2 BRI-2 BRI-2 - - Yes - 8 8 0 0 12 8 4 9 BRI-2 BRI-2 LCOT-2 LCOT-2 - - - Yes 4 4 2 2 6 10 10 5 BRI-2 BRI-2 BRI-1 BRI-1 LCOT-2 LCOT-2 Yes - 6 6 2 2 8 12 CO Line Configuration CO Trunk Without IPGW card CO Trunk With IPGW card
“ Slot Without DXDP With DXDP Built-in Ext. SLT D-PT Total SLT D-PT Total 1 4S/4D - 4 4 8 4 8 12 2 4S/4D DLC-8(D8) 4 12 16 4 16 20 3 4S/4D SLC-8(S8) 12 4 16 12 8 20 Extension Configuration - DXDP function is not supported on DLC-8 Card.
“ DXDP-Master DXDP-Slave 2 Wires 2 Wires XDP DXDP-Slave 4 Wires 4 Wires DXDP-Master 4 Wires 2 Wires 2 Wires 2 Wires Digital Extra Device Port (Digital XDP)-1 DXDP is available from first release. - DPT on DPT without additional HW or SW - Easy installation for additional Extensions - One DHLC port can be used for three telephones (2 x D-PT + 1 x SLT) - DXDP function is not supported on DLC-8 Card. Sorry, not possible
“ DXDP-Master DXDP-Master XDP DXDP-Slave DXDP-Slave 20 21 22 23 24 25 26 XDP 27 28 29 30 31 Digital Extra Device Port (Digital XDP)-2 Same As TDA30 Connection & Extension Number Assignment Oh! Easy DXDP-Slave
“ ø0.4mm Max. 500m ø0.5mm Max. 720m (CAT5) ø0.6mm Max. 830m ø0.4mm Max.40m ø0.5mm Max.50m (CAT5) ø0.6mm Max.60m DXDP-Slave DXDP-Master Telephone Master Slave Can be used - T7625 - T7630 - T7633 - T7636 - T7665 - T7625 - T7630 - T7633 - T7636 - T7665 Can not be used • - A-PT • - T72xx • - T74xx • - T75xx • DSS • - A-PT • - T72xx • - T74xx • - T75xx • DSS • CS • TVP Digital Extra Device Port (Digital XDP)-3 Same As TDA30 Condition-1 Condition-2 Condition-3 - OHCA function can not be used - T7601 (USB) can not be used (PC Phone / PC Console / PC Programming) Condition-4 (Parallel Connection) Sorry “NO”
“ ø0.4mm 222m ø0.5mm 347m (CAT5) ø0.6mm 500m New DECT- CS (KX-TDA0141) - Specific CS I/F card is not needed. - A port on DHLC can used as the interface of KX-TDA0141. - Two Voice Path per a CS. - Functionality : The same as TDA0142 Max.2 CS - CS Port assignment is not needed The TDA15 automatically detects the connected CS.
“ 1- Set a CS port to “OUS” 3- Select “PDCSDECT” 4- Click “Detail” 20 21 22 23 24 New DECT- CS (KX-TDA0141) -2 Same As TDA30 How to update the CS software 2- Go to “SD Card File View and Load” 5- Take the same procedure as TDA100/200
“ Caller ID for SLT (KX-TDA3168: Pre-installed ) -1 The TDA15 provides CLIP information for single line telephones. Same As TDA30 Caller ID data KX-TDA3168 Resource assignment The KX-TDA3168 has 2 resources (4ports/resource=Total 8SLT), the resources assignment for SLT extension card is needed. DHLC TDA3168 SLC-8-1 1-4 SLC-8-1 5-8 2 resources
“ Parallel mode Ext.20 Ext.20 20 21 22 23 XDP mode 24 25 26 27 Ext.20 Ext.24 1st Call 2nd Call Caller ID for SLT (KX-TDA3168) -2 Same As TDA30 Enable/Disable We enable/disable port by port. Timer=0: 1st call Ring 1st caller disconnects 2nd call Ring Timer=5: 1st call Ring 1st caller disconnects wait 5sec 2nd call Ring
“ New IPGW Card (KX-TDA3480) Same As TDA30 - 4ch IPGW Card - G729a/G723.1/G711 - T.38 (FAX) mode is not supported (FAX = G711) - Physical i/f: 10/100 Base-T - Web programming (English) - Interoperability with TDA0480: Incoming call, Outgoing call and CLIP only. - Interoperability with another manufacturers : Not guaranteed.
“ KX-TDA100/200 KX-TDA15/30 Features Not Supported by KX-TDA15/30 Same As TDA30 - The KX-TDA15/30 does not support the MSLC Functionality Therefore it will not support the KX-T7710, with its 90V neon message waiting light. - E1 / E&M / PRI / CTI-link card are not supported by the TDA15/30. - Pay tone detection is not supported by the TDA15/30.
“ PBX Features (Software) - The TDA15 features are the same as TDA30 Ver.1.1 features. Optional Card Software - All Optional Cards (Except IPGW, CS) are controlled by MPR. PC Programming Software - TDA30 PC programming software Ver1.1 is common software for TDA15 and TDA30. Maintenance Commands -The TDA15 PBX maintenance commands are the same as TDA30/100/200 PBX trace data capture function T-G 101 Volume level adjustment T-G 103 Advanced Ring setting T-G 105 Dial Tone level adjustment T-G 106 D-PT Gain adjustment T-G 108
“ Language data We can use the TDA100/200 language data. Optional Card data System data TDA0141 program System program PBX SD card data Same As TDA30
Let‘s Advance to Next Step with KX-TDA Systems