40 likes | 154 Views
Biomass-Conversion: Energy production (power, heat, biofuel) and additional products (chemicals, new materials) in the future biorefinery Energy reduction in the pulp and paper processes. Paper and Fibre Research Institute (PFI) 26.05.2011. PFI Paper and Fibre Research Institute AS.
E N D
Biomass-Conversion: • Energy production (power, heat, biofuel) and additional products (chemicals, new materials) in the future biorefinery • Energy reduction in the pulp and paper processes Paper and Fibre Research Institute (PFI) 26.05.2011
PFI Paper and Fibre Research Institute AS • Independent research institute in Trondheim, Norway • R&D with focus on processes/products based on lignocellulosic materials. • Focus areas: • Wood fibres • Pulp and paper • Novel biobased materials (composites, MFC) • Biofuel/bioenergy/biorefinery • Characterization of fibre structures and products • Subsidiary of INNVENTIA AB since 2004
Focus area Biofuel/biorefinery • Raw materials • Type (softwood, hardwood, straw, bagasse) and quality (waste, bark, mixed raw materials) • Pre-treatment and separation processes • Biochemical converting: • Mechanical, thermal, chemical, biological treatment for extraction and separation of sugar components, lignin and extractives from biomass. • Thermo-chemical converting • Torrefaction, pyrolysis for energy densification of biomass. • Conversion to energy products (bio-fuel, bio-oil, pellets) and green materials/chemicals. • Characterization • Chemical and morphological of raw materials, intermediate- and end products.
Energy reduction in pulp and paper processes • Reduced electrical energy consumption: • Norske Skog consumed 7.7 TWh electricity during 2010 and most of this was used in the thermo-mechanical pulping process (TMP). • In the TMP process, fibres are separated and developed and at the same time steam is produced. About 50-60% of this steam can be used for drying the paper on the paper machine. • PFI has together with Norske Skog and Andritz developed a new process called ATMP (Advanced TMP) where at least 25% of the electrical energy consumption can be reduced. Implemented, the new technology would reduce the electrical consumption in Norske Skog with 2.0-2.5 TWh annually. • In the ATMP process, new process stages are introduced and chemicals are used to facilitate the fibre development. • Reduced heat consumption: • Drying of paper requires huge amounts of steam energy and through furnish engineering, the energy consumption suring drying of newsprint has been lowered by 7 %.