1 / 5

Chapter 1 (Extra)

Chapter 1 (Extra). Noninverting amplifier:. Where Z in is the open-loop input impedance (internal) of the op-amp (without feedback connection). Inverting amplifier:. Generally, assumed to be R i. Op-amp Impedances. Generally, assumed to be 0.

lali
Download Presentation

Chapter 1 (Extra)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 1 (Extra)

  2. Noninverting amplifier: Where Zinis the open-loop input impedance (internal) of the op-amp (without feedback connection) Inverting amplifier: Generally, assumed to be Ri Op-amp Impedances Generally, assumed to be 0 Note that the output impedance has the same form for both amplifiers.

  3. Determine the input and output impedances of the amplifier in Figure below. The op-amp datasheet gives Zin = 2MΩ, Zout = 75Ω, and Aol = 200,000. • Find the closed-loop voltage gain. Example 5 Answer: (a) Zin(NI)=17.5GΩ, Zout(NI)=8.6mΩ, (b) Acl(NI) = 23.0

  4. Find the values of the input and output impedances in Figure below. Also, determine the closed-loop voltage gain. The op-amp has the following parameters: Aol = 50,000; Zin = 4MΩ; and Zout = 50Ω Example 6 Answer: Zin(I)=1.0kΩ, Zout(I)=980mΩ, Acl(I)=-100

  5. ~End of Chapter 1~

More Related