1 / 4

TOLERANCES

TOLERANCES. TOLERANCES – the basics.

lannyj
Download Presentation

TOLERANCES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TOLERANCES

  2. TOLERANCES – the basics It is not possible in practice to manufacture products to the exact figures displayed on an engineering drawing. The accuracy depends largely on the manufacturing process used and the care taken to manufacture a product. A tolerance value shows the manufacturing department the maximum allowable variation from the size. • Each dimension on a drawing must include a tolerance value. This can appear either as: • a general tolerance value applicable to several dimensions. i.e. a note specifying that the General Tolerance +/- 0.5 mm. • or a tolerance specific to that dimension Note the larger size limit is placed above the lower limit.

  3. TOLERANCES – some examples Here are some ways which you will see tolerances shown on drawings, it is the way you should show tolerances if asked to do so.

  4. back to menu TOLERANCES finished

More Related