1 / 5

Methods and Procedure for adjusting eccentric cones in INFN configuration

Methods and Procedure for adjusting eccentric cones in INFN configuration. Peter Amnuaypayoat 5/14/04. Procedure. Adjust inner cone relative to outer cone Apply reference location(s) on clamping template(s) Attach clamping template to Flexure mount Align preset cones to clamping template

larue
Download Presentation

Methods and Procedure for adjusting eccentric cones in INFN configuration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Methods and Procedure for adjusting eccentric cones in INFN configuration Peter Amnuaypayoat 5/14/04

  2. Procedure • Adjust inner cone relative to outer cone • Apply reference location(s) on clamping template(s) • Attach clamping template to Flexure mount • Align preset cones to clamping template • Set cones

  3. Adjustment of inner cone relative to outer cone Inner cone adjustment dial Template Inner and Outer Cones Slotted base for cone removal

  4. Apply reference location(s) to clamping template Temporary reference location(s) Will be made on Template

  5. Attach clamping template to flexure mount • Align preset cones to clamping template • Set cones • Extract if needed Flexure mount Adjustment tool Template Preset inner-outer cones

More Related