1 / 30

How to Deal With Automatic Transfer Switch Problems

ATS or automatic transfer switch essentially conveys electric power to the load from one of two power sources. It gets the job done on its own without any human involvement. Problems with such a vital part can put your backup power system in jeopardy. So, ensure the upkeep of your ATS.

Download Presentation

How to Deal With Automatic Transfer Switch Problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Deal With Automatic Transfer Switch Problems?

  2. Is your automatic transfer switch not switching?

  3. And, you are wondering, “why is my transfer switch not working?”.

  4. Because, if so, you have come to the right place.

  5. Here we will discuss some of the ATS problems.

  6. Let's begin by discussing what is ATS and how it works.

  7. Automatic Transfer Switch- A Brief Introduction

  8. Put simply, ATS activates the backup generator during a power outage.

  9. It will shut down the backup generator once the main power source is restored.

  10. It does everything completely automatically without any human intervention.

  11. And, to make all that possible, it takes the help of the following components; Power switching apparatus Transfer logic controller Control power source

  12. Your power backup system will fail if its transfer switch gets damaged.

  13. WHAT CAUSES ATS FAILURE?

  14. Your automatic transfer switch may fail due to any of the following reasons;

  15. Circuit breaker is tripped

  16. One of the most common causes of ATS failure is tripped circuit breaker.

  17. The reason behind a tripped circuit breaker could be one of the following things; Electric short circuits Overloads Ground fault surges

  18. Find and fix the culprit ASAP to prevent any major electrical problems.

  19. Corrosion due to moisture intrusion

  20. Corrosion due to moisture infiltration can also cause ATS problems.

  21. You can prevent this from happening by employing suitable environmental protection.

  22. Faulty logic controller

  23. The logic controller is the brain of the ATS and controls every aspect of its operation.

  24. If for any reason it goes bad then ATS will stop its work.

  25. SOLENOID BURN OUT

  26. Another common problem that can cause ATS failure is solenoid burnout.

  27. ATS will not work unless you replace the bad solenoid.

  28. ATS is required for a stable and continuous power supply.

  29. So if you think your ATS has a problem, get it tested.

  30. Phone Number Email Address (805) 429-4433 sales@leddypower.com Contact Information Mailing Address 5435 Atlantis Ct. Moorpark, CA 93021

More Related