How To Install 4FT LED Tubes?

1. 4FT LED T8 TUBES How To Make The Right Choice And Install Them? www.ledmyplace.com

2. 4ft LED Tubes At A Glance With 4ft T8 LED Tubes bringing incredible energy-savings and emitting light that has far greater number of lumens and higher CRI than the 4ft fluorescent tubes, there should be no reason to not have LED tubes installed in any warehouse or office space. Lasting 3-4 times longer than the fluorescent tubes and a rated lifespan of 50,000 hours, these LED tubes require very low maintenance and no replacement until they last. Further, these tubes provide you with innumerable options, whether it’s the base, the trim, the color temperature or ballast compatibility. About  4ft T8 LED Tubes The 4ft T8 LED tube is now heavily being used in all the three segments -- industrial, commercial and residential -- but one of the biggest problems that new users of 4ft T8 LED tube face is its installation. Henceforth, we from LEDMyplace chose to discuss this aspect more than anything else.      Even before you think of installing these 4ft T8 LED tubes, your first step must begin with right selection of these tubes depending on the kind of fluorescent tube fixture you have and then determining what kind of ballast option to choose. Last what follows is the installation of your newest 4ft T8 LED tube. www.ledmyplace.com

3. Selecting the Right 4ft T8 Tube Fixture Take out the fluorescent tube out of the fixture and check if it’s T8 or T12. Most 4ft T8 LED tubes available in market can easily replace all the three -- T8, T10 and T12 fluorescent tubes. Then, if it’s T8 fluorescent tube, it will most likely have electronic ballast and if T12, it has to be magnetic ballast. Quite generally, the older fluorescent tube fixture will always have magnetic ballast. Choosing The Right Ballast Option The 4ft T8 LED Tubes usually come in the following types • Ballast-Bypass Tubes • Hybrid (Ballast-Compatible Or Ballast-Bypass) Tubes • Ballast-Compatible Only Tubes www.ledmyplace.com

4. How To Install 4ft T8 LED Tubes If your choice is ballast-bypass 4ft LED tube and if the existing sockets are of the non-shunted kind, then remove the shunted sockets as 4ft T* LED tubes will work only with non-shunted sockets. www.ledmyplace.com

5. And, you must make sure that you remove the shunted sockets, in case you don’t have the non-shunted sockets as the T8 LED tubes can only work with non-shunted sockets. The best thing about ballast bypass LED tubes is that you don’t need to worry about any failure of the ballast and hence there is neither the hassle of maintenance or replacement every time the ballast fails nor any costs to inc www.ledmyplace.com

6. If your choice is hybrid, you have got two options in installation. If the 4ft LED tube tube is found compatible, plug-n-play else bypass the ballast and wire the tube directly to the line source.  You are advantaged greatly by having this kind of 4ft LED tube for if a ballast fails, you can always go for the second option. www.ledmyplace.com

7. Last but not the least, if your choice is -- ballast-compatible only 4ft T8 LED tubes,  you need to just ‘plug-n-play’. Make sure the existing fluorescent tube ballast is an electronic ballast. Take out the fluorescent tube and replace it with 4ft T8 LED tube. Manufacturer’s compatibility list is all you need to check! www.ledmyplace.com

8. Conclusion All that said, one point must be very clear to you and that is -- understanding your existing fluorescent tubes perfectly so that you can replace them with 4ft T8 LED tubes in the best way possible. www.ledmyplace.com

9. THANK YOU www.ledmyplace.com