1 / 5

Wetting balance test as a new test technique for low cost manufacturing lithium ion battery

Wetting balance test as a new test technique for low cost manufacturing lithium ion battery. Yangping Sheng ; Advisor: Dr. Ben Church; Material Science and Engineering. Wettability issues. There is no effective and accepted method to measure and interpret this process.

lee
Download Presentation

Wetting balance test as a new test technique for low cost manufacturing lithium ion battery

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wetting balance test as a new test technique for low cost manufacturing lithium ion battery YangpingSheng; Advisor: Dr. Ben Church; Material Science and Engineering

  2. Wettability issues There is no effective and accepted method to measure and interpret this process.

  3. Wetting rate from Wetting Balance test Anode in DMC m: mass t: time K: liquid penetration rate r: liquid density Wetting Rate (mm/S0.5) Ae: cross-sectional area of electrode P: porosity of the electrode reff: effective average capillary radius glv: surface tension of liquid h: viscosity q: contact angle

  4. Systematic research? Or still trial-and-error test. A hydraulic pore model Pore diameter range: Anode 0.03-3.6 um, Cathode 0.02-7.8um Anode Cathode

  5. Thanks for your attention And any questions?

More Related