1 / 20

Fine PM – Only Part of the Monitoring Story

Fine PM – Only Part of the Monitoring Story. Oliver Puddle DustScan Ltd 14 March 2013. CONTENTS. What is fine particulate matter (PM)? Why do we monitor it? What should PM monitoring achieve? Is fine PM the only emission we can monitor? What is visible ‘nuisance’ dust?

leo-fox
Download Presentation

Fine PM – Only Part of the Monitoring Story

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fine PM – Only Part of the Monitoring Story Oliver PuddleDustScan Ltd14 March 2013

  2. CONTENTS What is fine particulate matter (PM)? Why do we monitor it? What should PM monitoring achieve? Is fine PM the only emission we can monitor? What is visible ‘nuisance’ dust? Why should we monitor it?

  3. What is fine particulate matter (PM)? ‘Dust’ is defined in BS6069 Part 2 as particulate matter < 75μm (micron) diameter Fine PM is essentially dust particles up to 10µm Commonly referred to as PM10 Smaller size fractions (PM2.5, PM1 etc) Inhalable, thoracic, respirable ‘Dust’ & fine PM are generic terms

  4. What is fine PM?

  5. What is fine PM? • Many potential sources • ‘Natural’ background dust • Fugitive industrial dust • Surface mining and minerals • Waste transfer and landfill • Land remediation • Secondary aggregates • Construction and demolition • Roads and transport • Agriculture • Stack emissions

  6. Why do we monitor fine PM? LEGISLATION – since 1956 Clean Air Act Air Quality Regulations (AQR) prescribe National Air Quality Strategy (NAQS) objectives – AQOs. Also WELs Includes PM10 (not PM2.5 - yet) Local Authority Air Quality Management (LAQM) Exceedence of AQO = Air Quality Management Area (AQMA) Fine PM monitoring usually a matter of compliance BUT Fine PM only represents a small fraction of most sites total dust emissions Fine PM monitoring often specified at sites when it isn’t appropriate – regulatory burden with cost implications

  7. What should PM monitoring achieve? Effective monitoring should aim to answer: 1) How much dust/PM is there? 2) Where has it come from? 3) What’s in it? Results of the compliance approach to monitoring only partly answer the first question

  8. Is fine PM the only emission we can monitor? From: Good practice guide: control and measurement of nuisance dust and PM10 from the extractive industries (AEA, 2011)

  9. Is fine PM the only emission we can monitor?

  10. Is fine PM the only emission we can monitor?

  11. Is fine PM the only emission we can monitor?

  12. Is fine PM the only emission we can monitor?

  13. What is visible ‘Nuisance’ dust? • Poorly-defined: visible dust; dust annoyance, dust soiling) is not regulated • Short-term (acute) impacts • Long-term (chronic) impacts • Unlike PM10, limit values not agreed (custom and practice criteria / best practice guidance) • Range of passive monitoring approaches: dust mass or dust effect; dust deposition or dust flux

  14. What is visible ‘Nuisance’ dust?

  15. Why should we monitor visible dust? • Visible dust can have annoyance impacts – loss of amenity, complaints etc. • Less expensive & more convenient to monitor • Directional visible dust monitoring can help determine the direction of dust & fine PM sources • Samples of visible dust can be readily analysed for metals, mineralogy and physical characteristics • Can also be used for compliance monitoring!

  16. Why should we monitor visible dust? Fine PM only represents a small fraction of most sites total dust emissions

  17. Why should we monitor visible dust? DustScan DustDisc deposition sampler – Discrete, un-powered, in-expensive

  18. Why should we monitor visible dust? Photomicrograph showing particles of ??? in a directional visible dust sample

  19. DustScan DS500X sampler • Combined gravimetric filter reference PM10 sampler & directional sticky pad visible dust gauge • Simultaneous measurements – 24hr PM10 concentration, directional AAC% and EAC% and deposited mass (with DS500X-D) • How much dust/fine PM is there? • Where has it come from? • What’s in it? (after specific analyses)

  20. Thank you / Questions Oliver PuddleDustScan Ltd www.DustScan.co.uk 01608 810110 Stand 15

More Related