1 / 15

APRV

APRV. By Kellianne McCaffrey and Rowena Eason. What is it?. Airway Release Pressure Ventilation is a method of ventilation that provides two levels of continuous positive airway pressure (CPAP) and allows spontaneous breathing at both levels. It is time triggered and time cycled

Download Presentation

APRV

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. APRV By Kellianne McCaffrey and Rowena Eason

  2. What is it? • Airway Release Pressure Ventilation is a method of ventilation that provides two levels of continuous positive airway pressure (CPAP) and allows spontaneous breathing at both levels. • It is time triggered and time cycled • Ideally, promote higher MAP and improve oxygenation

  3. Auto-PEEP and APRV • Release time does not allow the patient to expire entirely, intentionally causing an intrinsic PEEP air trapping to keep alveoli open

  4. When is APRV used? • APRV is beneficial to patients with acute lung injury (ALI) and acute respiratory distress syndrome (ARDS) • This is because these patients are difficult to oxygenate based on their inadequacy of gas exchange

  5. How does it help? • APRV provides consistent lung recruitment, prolonged and improved oxygenation through the increased mean airway pressure • It does NOT increase PIP.

  6. Set up • What is set? • Time-hi (inspiratory) • Time-lo is the time that Low pressure is held (AW pressure release time to allow for CO2 release ie. expiratory) • Pressure-hi • Pressure-lo • FiO2

  7. What does that mean?!? • Pressure-Hi is the high pressure given on inspiration • Pressure-Lo is the Low pressure given on expiration • Time-Hi is the amount of time the High pressure is held • Time-Lo is the time that the Low pressure is held

  8. Basic Parameters • Low Pressure 0 cmH2O, High Pressure 20-30 cm H2O • Low Time 0.4-0.6 seconds, High Time 4-6 seconds • adjust accordingly to maintain Vt between 4-6 ml/kg

  9. Oxygenation status • Different measures will be taken depending on whether or not the patient is oxygenating and ventilating well. • T-hi must be increased if patient remains severely hypoxemic after beginning APRV • If oxygenation is adequate, the patient may be ready to be weaned

  10. Weaning • Can be weaned to pressure support. • FiO2 is always weaned FIRST. • Inspiratory time is increased • Pres-lo is increased gradually to 8-10 cmH2O • Pres-hi is decreased, typically 2-3 cmH2O at a time

  11. Weaning (cont’d) • Inspiratory time is increased while the high pressure is decreased in order to reduce the total number of release phases. • Ultimately the two pressures are set to match the MAP and allow the patient to breathe spontaneously on CPAP

  12. Other names • Each ventilator has a different name for the same thing • Servo calls it BiVent • Puritan Bennet calls it BiLevel • Drager and Hamilton both call it APRV

  13. APRV rocks! • Rowena’s favorite part about APRV is that it continuously recruits the lungs and really helps the ARDS patients. • Kellianne’s favorite part about APRV is the simplicity of the weaning process.

  14. References http://www.americannursetoday.com/airway-pressure-release-ventilation-a-boost-for-spontaneous-breathing/http://www.ncbi.nlm.nih.gov/pubmed/24093118 http://www.ccjm.org/content/78/2/101.long#abstract-2 www.respiratorytherapyfiles.net Pilbeam’s Mechanical Ventilation 5th edition 2012 http://www.ncbi.nlm.nih.gov/pubmed/24093118 http://www.ccmtutorials.com/rs/mv/strategy/page14.htm

More Related