1 / 36

A GENERIC OFFICE WITHOUT THE WISENET SYSTEM

A GENERIC OFFICE WITHOUT THE WISENET SYSTEM. A GENERIC OFFICE WITH THE WISENET SYSTEM. WHAT THE WISENET SYSTEM CONSISTS OF. Gateway / Server / Wireless Network Manager.

lieu
Download Presentation

A GENERIC OFFICE WITHOUT THE WISENET SYSTEM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A GENERIC OFFICE WITHOUT THE WISENET SYSTEM

  2. A GENERIC OFFICE WITH THE WISENET SYSTEM

  3. WHAT THE WISENET SYSTEM CONSISTS OF Gateway / Server / Wireless Network Manager The Gateway or PAN Coordinator automatically discovers and manages the Router Repeaters and Sensors that are designated to be part of the Network. The Gateway only communicates directly with the Router Repeaters. Router Repeater / Mesh Node The Router Repeaters communicate with the Sensors and receive the actual counts of activity at each individual Workstation or Position. They in turn forward that data to the Gateway. Each Router Repeater can support a maximum of 32 Sensors, 20 is optimal. Sensor / Activity Counter / Star Node The Sensors are installed at each work position to be measured and forward their activity counts to the Router Repeaters which in turn forward that data to the Gateway where it is stored for daily transmission over the Internet to the Abintra Wisenet client application. The data can be shared with other applications using the site IT Infrastructure.

  4. WISENET IS A FULLY AUTONOMOUS, SELF HEALING DISCREET WIRELESS MESH NETWORK • Installation takes place during unoccupied periods • Sensors are mounted under work surfaces • Router Repeater Mesh Nodes connect to power outlets • Gateways connect to Customer IT Network

  5. REPORTS VIA WEB PORTAL Abintra Client App Site Firewall • Data from Sensors is pushed to Router Repeaters • Data from Router Repeaters is pushed to Gateway • Data from Gateway is pushed to Abintra Client Application

  6. TECHNICAL POINTS Q Can the Abintra Wisenet Wireless Network interfere with other wireless infrastructure in our facility ? A No, the transceiver power levels are too low to affect 2.4 GHz Wi-Fi Traffic and we use continuous dynamic Frequency Hopping techniques to avoid transmitting on saturated channels. Q Are there any health risks associated with the wireless network devices? A No, again the power levels are significantly less than those associated with Wi-Fi or even individual cell phones. Q What are the sensors active elements? A The active element in the sensor is a Passive Infrared Motion Sensor that senses the human body heat wave form signature, no cameras, no microphones, and no RFID tags. Q What type of Wireless Network is Wisenet? A It is 802.15.4, similar to 802.11 it operates in the same 2.4 GHz RF spectrum but at highly restricted transmission intervals and power levels. Q How is the Network secured? A All Mesh communication traffic is in compliance with the NIST AES-197 encryption standards.

  7. WHAT WISENET SEES TIME: 09:50 Workstations Conference Room Touchdown Count 24 12 12 Occupied 18 12 0 Utilization 75.0% 100.0% 0.0% Unoccupied Occupied

  8. HOW DATA CAN BE USED TO EVALUATE OR AUGMENT OTHER FACILITY FUNCTIONS TIME: 10:00 Workstations Conference Room Touchdown Count 24 12 12 Occupied 16 2 3 Utilization 66.6% 16.6% 25.0% • The Meeting Room with 12 Seats was booked through the In House Event Management System for a party of 9, yet only 2 people actually used the room for most of the booked time.

  9. FOLLOWING THE SURVEY CHANGES TO THE SPACE CAN BE MADE WITH PRECISION TIME: 10:10 Workstations Conference Room Touchdown Count 24 12 12 Occupied 14 0 0 Utilization 58.3% 0.0% 0.0%

  10. 10 MINUTE RESOLUTION PROVIDES HIGHLY ACCURATE USE RATE TIME: 10:20 Workstations Conference Room Touchdown Count 24 12 12 Occupied 19 0 1 Utilization 79.2% 0.0% 8.3%

  11. OTHER FACTORS SUCH AS VACATION AND FIELD DUTIES CAN BE FACTORED TIME: 10:30 Workstations Conference Room Touchdown Count 24 12 12 Occupied 19 1 1 Utilization 79.2% 8.3% 8.3%

  12. STATISTICALLY THIS CONFERENCE ROOM CAN BE CONVERTED FOR OTHER USE TIME: 10:40 Workstations Conference Room Touchdown Count 24 12 12 Occupied 20 1 1 Utilization 83.3% 8.3% 8.3%

  13. Now that you have Utilization / Occupancy Data what else can be done with it? • Dynamic feed forward information to Lighting Control Systems • Dynamic feed forward information to Building Automation Systems • Dynamic feed forward information to Security Administration • Daily Reports to Facility Services

  14. THESE NEXT SLIDES DEPICT HOW A DYNAMIC MEASUREMENT OF OCCUPANCY CAN BE APPLIED TO THE CONTROL OF NEXT GENERATION LIGHTING PRODUCTS THAT ARE AVAILABLE TODAY. CONTROL ENGINE BY EXP , LED LUMINAIRES BY TREND LIGHTING AND DYNAMIC OCCUPANCY MEASUREMENT BY ABINTRA WISENET.

  15. Abintra Lighting Description

  16. Points • System diagram – type 1 – 1 fixture / driver • System diagram – type 2 – N fixtures / driver • Recommend Luminaire specifications • Recommend Driver specifications • Appendix: Other Luminaire & Driver selections

  17. type 1 – 1 luminaire/ driverdescription • All luminaires are Class 2 LED light fixtures • Each LED driver is paired with only one luminaire • LED drivers are located remotely • The LED driver model is dimmable • 1 wireless dimmer module dims single or multiple LED drivers depending on resolution desired

  18. type 1 – 1 Luminaire / Driver 1-10V or PWM or On/Off switch 1-10V or PWM or On/Off switch 1-10V or PWM or On/Off switch Wireless Dimmer Wireless Dimmer Wireless Dimmer + - + - + - LED driver LED driver LED driver LED driver LED driver LED driver LED driver LED driver LED driver Line Voltage Line Voltage Line Voltage Zone 2 Zone 3 Zone 1 - + - + - + - + - + - + - + - + - + luminaire luminaire luminaire luminaire luminaire luminaire luminaire luminaire luminaire DC DC DC DC DC DC DC DC DC

  19. type 2 – N luminaires/ driverdescription • All luminaires are Class 2 LED light fixtures • Each LED driver is paired with single or multiple luminaires • LED drivers are located remotely • The LED driver model is dimmable • 1 wireless dimmer module dims single or multipleLED drivers depending on resolution desired

  20. type 2 – N luminaires/ driver 1-10V or PWM or On/Off switch 1-10V or PWM or On/Off switch 1-10V or PWM or On/Off switch Wireless Dimmer Wireless Dimmer Wireless Dimmer + - + - + - LED driver LED driver LED driver Line Voltage Line Voltage Line Voltage - + - + - + - + - + - + Zone 3 Zone 2 Zone 1 DC DC DC DC DC DC luminaire luminaire luminaire luminaire luminaire luminaire luminaire luminaire luminaire - + - + - + DC DC DC

  21. LED luminaire 2x2 • PN: GLT Ceiling Lighting 6060 UL • 46W, 36VDC(estimated. Depending on the driver chosen) • 3000 LM output • Beam Angle 110°-120° • Net Weight/Gross Weight: 12.5 lbs. (N.W) • UL certified

  22. LED luminaire 2x4 • PN: JZPL1206-B1-36V • 83W, 36VDC (estimated. Depending on the driver chosen) • 6000 LM output • Beam Angle 110°-120° • Dimensions: 1598L*598W*44.6H(mm)/ 47.2L * 23.6W * 1.77H inch • Net Weight/Gross Weight: 25.5 lbs. (N.W) • UL

  23. LED driver - 1 luminaire/ driver HLG – 60H- 36B • 60W • 95% high efficiency • 110~277VAC input • 3 in 1 dimming function (1~10VDC, PWM signal  or resistance) • Withstand 4kV surge, suitable for LED street lighting • UL / CUL / TUV / PSE / CE certified • 5 years warranty 

  24. LED driver - 1 luminaire/ driver HVG – 100- 36B • 100W • 95% high efficiency • 180~480VAC input • 3 in 1 dimming function (1~10VDC, PWM signal  or resistance) • Withstand 4kV surge, suitable for LED street lighting • UL / CUL / TUV / PSE / CE certified  • 5 years warranty 

  25. LED driver - N luminaire/ driver HLG – 320H- 36B • 320W • 95% high efficiency • 110~277VAC input • 3 in 1 dimming function (1~10VDC, PWM signal  or resistance) • Withstand 4kV surge, suitable for LED street lighting • UL / CUL / TUV / PSE / CE certified  • 5 years warranty

  26. Dimmable LED driver list • HLG Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance) • HLG-40H-XXB • HLG-60H-XXB • HLG-80H-XXB • HLG-100H-XXB • HLG-120H-XXB • HLG-150H-XXB • HLG-185H-XXB • HLG-240H-XXB • HLG-320H-XXB • XX means Voltages=12,15,20,24,30,36,42,48,54 • HVG(C) Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance) • HVG-100-XXB • HVG-150-XXB • XX means Voltages=12,15,20,24,30,36,42,48,54 • HLP Series • HLP-40H-XX • HLP-60H-XX • HLP-80H-XX • XX means Voltages=12,15,20,24,30,36,42,48,54 • HLN Series - B type: 3 in 1 dimming function (1~10VDC, PWM, resistance) • HLN-40H-XXB • HLN-60H-XXB • HLN-80H-XXB • XX means Voltages=12,15,20,24,30,36,42,48,54 • LPF Series - D type: 3 in 1 dimming function (1~10VDC, PWM, resistance) • LPF-16D-XX • LPF-25D-XX • LPF-40D-XX • LPF-60D-XX • LPF-90D-XX • XX means Voltages=12,15,20,24,30,36,42,48,54 • ELN Series • ELN-30-XXD • ELN-30-XXP • ELN-60-XXD • ELN-60-XXP • XX means Voltages=12,15,20,24,27,48 • If dimming not required, switching power supplies can be used.

  27. EXP Niagara Control Engine Occupancy / Utilization Data feed forward to the local control engine from the Abintra Sensing Network. Control Actions, On/Off, Dimming, Ambient Adjustment, Master Scheduling feed from the control engine to individual groups of LED’s.

  28. In the example shown below in an existing facility the furniture infrastructure may not always be ideally in alignment with the existing Lighting Fixture locations. The Fixtures highlighted in red would be the Master LED Luminaire with the PWM Driver and the associated slave LED’s would be connected by low voltage Class II cabling.

  29. IN THIS SCENARIO ONLY 29% OF THE AREA LIGHTING NEED BE AT 100% 71% OF THE LIGHTING NEED ONLY OUTPUT AT 20% LIGHTING ENERGY SAVINGS OF 50% DYNAMICALLY CONTROLLED • Savings from LED vs. T8 Fluorescent 42% • Savings of 50% on LED Luminaires via Occupancy Control • Savings 8% on avoided HVAC Lighting Load Cooling

  30. THESE NEXT SLIDES DEPICT HOW DYNAMIC MEASUREMENT OF OCCUPANCY CAN BE APPLIED TO AUGMENT YOUR EXISTING BUILDING AUTOMATION SYSTEM PROCESSES, NOT BY DIRECTLY CONTROLLING RELATED HVAC SYSTEMS BUT BY PROVIDING HIGHER RESOLUTION OCCUPANCY DATA TO THOSE SYSTEMS THAT SERVE THE OCCUPIED AREAS.

  31. WHAT THE BUILDING AUTOMATION SYSTEM SEES 4 Deg F Above Set Point 2 Deg F Above Set Point At Set Point Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square Feet Single Point of Measurement 2 Deg F Below Set Point 4 Deg F Below Set Point

  32. WHAT WISENET SEES 4 Deg F Above Set Point Because each Wisenet Sensor can be populated with a Temperature Sensor a detailed heat map of each area down to position level can be dynamically acquired. 2 Deg F Above Set Point At Set Point Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square Feet Single Point of Measurement 2 Deg F Below Set Point 4 Deg F Below Set Point

  33. WHAT THE FACILITY MAINTENANCE DEPARTMENT CAN NOW SEE The air distribution ductwork downstream from the VAV Box typically has manual balancing dampers which are initially set by the contractor of record. Over the course of time with internal equipment changes and floor layout alterations the air balance may not be adequate for the space. Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square Feet Single Point of Measurement Wisenet can prove to be a valuable tool to assist the Facility Maintenance personnel in solving these comfort, and ultimately productivity issues.

  34. WHAT THE ACCOUNTING DEPARTMENT CAN NOW SEE Section 9. from Use Case Example of 65,000 Square Foot building.

  35. Questions

More Related