1 / 12

Physical Properties

Physical Properties. (2.2)PHYSICAL PROPERTY. A physical property is any characteristic of a material that can be observed or measured without changing the composition of the substances in the material.

lilian
Download Presentation

Physical Properties

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Physical Properties

  2. (2.2)PHYSICAL PROPERTY • A physical property is any characteristic of a material that can be observed or measured without changing the composition of the substances in the material. • Viscosity, conductivity, malleability, hardness, melting point, boiling point, and density are examples of physical properties.

  3. Viscosity • The tendency of a liquid to keep from flowing—its resistance to flowing— is called its viscosity. • The greater the viscosity, the slower the liquid moves. • Thick liquids, such as corn syrup and the honey have a high viscosity. • Thin liquids, such as vinegar, have a low viscosity. • The viscosity of a liquid usually decreases when it is heated

  4. Conductivity • A material’s ability to allow heat to flow is called conductivity. • Materials that have a high conductivity, such as metals, are called conductors. • Materials that have a low conductivity are called insulators • If a material is a good conductor of heat, it is usually also a good conductor of electricity

  5. Malleability • Malleability is the ability of a solid to be hammered without shattering. • Most metals are malleable. • Solids that shatter when struck are brittle. • Most insulators are brittle as well

  6. Hardness • We have already covered this way back October • Just remember that a substance can only scratch something that it is either equal to or less than in hardness. • Something with a value of seven can scratch minerals with a value of seven or below.

  7. Melting/Boiling Point and Density • Melting Point-This is the temp in which a substance goes from solid to liquid • Boiling Point is liquid to gas • Density can be used to test the purity of a substance. • Recall that density is the ratio of the mass of a substance to its volume.

  8. Using Physical Properties • Physical properties are used to identify material, to choose a material for a specific purpose, or to separate the substances in a mixture. • Some properties can be used to separate mixtures. • Filtration and distillation are two common separation methods.

  9. Filtration is a process that separates materials based on the size of their particles. • When people make fresh coffee they use a filter to separate the coffee beans from the coffee. • Distillation is a process that separates the substances in a solution based on their boiling points. • We distill salt water to make fresh water.

  10. Physical Change • A physical change occurs when some of the properties of a material change, but the substances in the material remain the same. • Two examples of physical changes are crumpling a piece of paper and slicing a tomato. • Crumpling and slicing are actions that change the size and shape of a material, but not its composition.

  11. Some physical changes can be reversed. • You can freeze water, melt the ice that forms, and then freeze the water again • Some physical changes cannot be reversed. You would not be able to replace the peel on a peeled orange

More Related