1 / 11

Sandpiper Series training June 2009

Sandpiper Series training June 2009. Agenda. Ⅰ. Laser Beam Printer Ⅱ. Architecture of F/W Ⅲ. F/W Initialization Ⅳ. Download & LED Status Ⅴ. Model Specification Ⅵ. Information page. I. Laser Beam Printer. Hardware & ASIC Control Emulation : SPL, PCL, EPSON/IBM Emulation Interface

lirit
Download Presentation

Sandpiper Series training June 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sandpiper Series training June 2009

  2. Agenda Ⅰ. Laser Beam Printer Ⅱ. Architecture of F/W Ⅲ. F/W Initialization Ⅳ. Download & LED Status Ⅴ. Model Specification Ⅵ. Information page

  3. I. Laser Beam Printer • Hardware & ASIC Control • Emulation : SPL, PCL, EPSON/IBM • Emulation Interface • Engine Control • Panel Control (LED, Key) • Host Interface : USB 2.0(or 1.0), Network Printer Driver Print Command 1. Convert the Image to PDL 2. Transfer the PDL F/W After processing the PDL, print the image

  4. II. Architecture of F/W Application Layer • Application Layer • (Emulation) • Kernel Layer • (pSOS+ & Kernel) Kernel pSOS+ • Hardware Access Layer • (Hardware Control) F/W Driver Module Board Support Package Hardware • Physical Layer • (Hardware)

  5. III. F/W Initialization • Turn on printer : Jump to reset vector, Start booting Booting • Initialize BSP • start kernel Kernel • Initialize the system of F/W • (Cache/Timer/Environment/Memory/Interface) • Initialize the parts dependent of model • Initialize the engine interface • Search a emulation

  6. IV. Download & LED Status

  7. IV. Download & LED Status /W

  8. V. Model Specification

  9. VI. Information Page

  10. Terminology

  11. Q & A

More Related