1 / 7

Machine Control

Machine Control. Human Machine Interface – HMI Monitor screen Keyboard Mouse or Touchpad Programmable logic controllers - PLC Main PLC Motion Controller. What is HMI?.

lisbet
Download Presentation

Machine Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Machine Control • Human Machine Interface – HMI • Monitor screen • Keyboard • Mouse or Touchpad • Programmable logic controllers - PLC • Main PLC • Motion Controller

  2. What is HMI? • HMI is the device that allows an operator to control, interact with, or adjust a Machine. That includes hardware (physical) and software (logical) components. • The HMI provide two way of communication: • Input, allowing the users to manipulate a system • Output, allowing the system to indicate the effects of the users' manipulation

  3. What is PLC? • PLC controls the automatic process in machine. There are multiple devices which are responsible for different processes. • Main PLC is the core of machine and control all processes and other PLC • Motion Controller control motion of servo motors and sensors connected to motors

  4. Why we use Motion Controller • It is used to achieve some benefits: • increased position and speed accuracy • higher speeds • faster reaction time • smoother movements • reduction in costs

  5. Interact with machine • First power on the machine. And wait until on screen all loaded and Kombis Interface Program loaded and ready to use. Time for loading don’t exceed 50 – 60 seconds. • Prepare machine for running by checking current condition. Check power to modules and release Emergency stop buttons if needed. • Change Work mode to Capping Station. Press STEP button on Capping station to be sure that every module is ready. Repeat until there is one rotate of Index block • Change Work mode to BodyMaker. Press AUTO button on bodymakerand check that everything is OK • Change Work mode to Normal and press AUTO button and machine will run as long as needed

  6. Interact with machine • What is current condition of machine • On screen we see four modes • RESET – when you reset the PLC • STOP – when machine is stopped • STEP – when STEP button is pressed • AUTO – when machine work normally • The machine lights • Steady yellow light – machine is stopped or in RESET mode • Yellow light blinks – machine is stopped and need attention • Green light blink ones – STEP button is pressed • Steady green light – Machine works normally in AUTO mode

  7. Interact with machine • How to change parameters • Use mouse to select desired parameter on screen and change with clicks on arrows (up/down) in the field • Use keyboard – after selecting parameter use arrow keys Up/Down to change

More Related