1 / 4

Copper Test

Copper Test. 1. Label the two beakers with their appropriate water sample names. 2. Put 10 mL of sample in their respective beakers. 3. Dip one test strip in sample or (CGLS) beaker for 30 seconds with constant back and forth motion.

lisle
Download Presentation

Copper Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Copper Test

  2. 1. Label the two beakers with their appropriate water sample names. 2. Put 10 mL of sample in their respective beakers.

  3. 3. Dip one test strip in sample or (CGLS) beaker for 30 seconds with constant back and forth motion.

  4. 4. Remove and match colour after 2 minutes to determine the Copper concentration in mg/L or parts per million (ppm). Results: Compare results to the Guidelines for Canadian Drinking Water Quality. The Canadian Guideline should give a result very close to the 1 mg/L guideline; a darker colour means that the water Does Not meet the Guidelines for Canadian Drinking Water Quality.

More Related