1 / 4

SSL 8in Photocathode 3 rd Try

SSL 8in Photocathode 3 rd Try. 8” PC/Seal Test Chamber <10 -9 Torr base vacuum, RGA operational, fully baked Same 5mm thick, 8.7” polished B33 window as try #2, never let up to air. NiCr border electroded Baked at 375°C for 24 hours “ ALL” visuals & photoresponse from #2 GONE

locke
Download Presentation

SSL 8in Photocathode 3 rd Try

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SSL 8in Photocathode 3rd Try • 8” PC/Seal Test Chamber • <10-9Torr base vacuum, RGA operational, fully baked • Same 5mm thick, 8.7” polished B33 windowas try #2, never let up to air. • NiCr border electroded • Baked at 375°C for 24 hours“ALL” visuals & photoresponse from #2 GONE • Deposited Na2KSb photocathode • RGA record for entire process • Cathode everywhere but extreme corners –

  2. 8” -Na2KSb bialkali 3rd Process 1.09 0.91 0.94 0.88 0.85 0.82 1.15 0.94 1.00 0.88 1.09 0.91 0.79 0.88 1.00 0.97 1.27 Somewhat too blue, but was ashort process, only 2 KSb cycles. Can add cycles next shot.Same window as #2 – still have surface contamination so next day QE was degraded. Uniformity much better than before. Generally ±15%.QE curve was measured at the upper right where it is ~0.9 (relative).

  3. 8” Na2KSb Process #2 - Comparison 0.85 0.64 0.58 0.55 1.06 0.96 0.61 0.50 0.98 #2A Cathode 2A was very blue, and decayedduring deposition process – indicative of possible window contamination. Uniformity measurementsworse in middle and corners.

  4. 8in Photocathode Plan • Prepare new windows. • Optimize cleaning processes and use oxygen plasma clean as last step (have run sample tests last week to verify). • Deposit electrode with “X” conductor across the diagonals (tooling ready). • Use larger 40mm alkali sources. • Can shoot 3 or 4 cathodes in one pumpdown using Alkali/Sb materials, and employing high temperature vacuum bakes between.

More Related