1 / 11

HIGHLY CONFIDENTIAL

ILFS New Technology and Product Presentation Presented By: Scott Goldstein-President. HIGHLY CONFIDENTIAL. Fugitive Adhesive and Dry Peel. Requirements: Hot Melt Clean release Water-base Tackless or retack (if desired) Recommendations: 57-482 to 57-486 Series

lona
Download Presentation

HIGHLY CONFIDENTIAL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ILFS New Technology and Product PresentationPresented By: Scott Goldstein-President HIGHLY CONFIDENTIAL

  2. Fugitive Adhesive and Dry Peel Requirements: • Hot Melt • Clean release • Water-base • Tackless or retack (if desired) Recommendations: • 57-482 to 57-486 Series • All fugitives must be tested on specific stock. • Water-base Repositionable to be diluted with water. • 57-5071 (Lowest release value at 11 grams) • 57-5074 (Higher release value at 20 grams for offset stocks and envelope flap) • 41-24-1 • Hot Melt. Great anti-stain. Clean release.

  3. Dry Peel • Water-base with UV Topcoat (26-35-1 with L9091VT) • Hot Melt with UV Topcoat (28-67-5 with L9042M) Refer to www.inlinefinishingsolutions.com for process schematic.

  4. UV Silicone Release Coating/Repositionable and Permanent Hot Melt and Water-base Adhesives For Hand Applied Labels: • Apply L9091L free radical UV silicone via pattern gluer with photopolymeric plate, and then apply 37-625 repositionable, or ANY standard permanent pressure sensitive hot melt. • Apply L9091L free radical UV silicone via pattern gluer with photopolymeric plate, and then apply 30-37-3 semi-permanent water-base pressure sensitive. • Note: 300 fpm/400 watt lamp For Premium Release/Auto Dispensed Labels: • PC-605 cationic UV silicones applied via flexo with photopolymeric plate with permanent PSHM 16-66-2 or repositionable PSHM 37-625. • Refer to www.inlinefinishingsolutions.com for process schematic.

  5. Water-base Release Coating/Repositionable or Permanent Hot Melt Machine Requirements: • Apply L9100 M (2 component system) via flexo applicator with photopolymeric plate. L9100 M exhibits clean release with both permanent and repositionable hot melt pressure sensitives, and with semi-permanent water-base PSA (30-37-3). Dry with standard convection air at 220-250ºF for 0.5 sec dwell.

  6. Benefit Summary of ILFS’s Integrated Label Technology Far More Cost Effective • Offers a 33% cost savings over purchasing pre-converted release liner/pressure sensitive face stock and tipping it on to the web. • Offers a 41% cost savings over purchasing and tipping on coated release liner alone. • Offers further savings due to your ability to pattern-apply release coating and adhesive only in the areas that it is required. Faster Production • Eliminates the need for slow, tip-on label application of pressure sensitive labels to the web allowing you to increase web speeds up to 800+ fpm.

  7. Benefit Summary of ILFS’s Integrated Label Technology Reduced Inventory Carrying Costs • Eliminates the need for large inventories of converted pressure sensitive roll stock and allows you to convert on a just-in-time production basis. Additional Printing Surface • You can print or image directly under the release coating to convey additional messages to customers after they have removed the label. Elimination of Stacking Problems • Because two panels unite to form one continuous surface, the 4 mil imbalance created by tipping on release liner and pressure sensitive stock is eliminated. The result is a smooth, integrated label product that stacks flat on skids.

  8. Current New Business Development Opportunities • Textured and High Profile (MBOSS) UV Topcoat (L9074V) for Screen over AGS films. L9074V for Screen over Low to 0% wax/silicone containing heat set varnishes. L9082T for flexo for over varnish application and over AGS films. L9066H for chemical texturing. • UV Glitter and Pearlized Topcoat (press side add 26-35-3) • UV and Water-base Glow-in-the-dark Coatings (For Screen and Flexo: UVS100V (green) and UVS102V (blue). Coat weights at 0.5-1 mil. • UV Thermochromic (UVS101V [flexo] and UVS109V [Screen]). 31ºC activation temp. Flexo applied at 1-1.5 mil coat weight. Black to clear. • UV Silver/Gold Scratch-off (L9093HS or HG). Run over 96U152H/L9091L (90:10% to 80:20%) primer. Use Gallium doped, V-Bulbs if enhanced cure is needed. • Hot Melt Remoistenable (28-57-4).

  9. Current New Business Development Opportunities • Magnetized UV Varnishes for Low-end Magnet Promotions (UVS107V Binder/A6256P Powder w/A6428P Primer). • UV Laminating Adhesive (UVA 105 M for Standard Performance). • UV Pressure Sensitive Adhesive (UVPS100E). • For cold foil applications • For “plastic card” laminations • Magnetic UV Varnish for Information Strips on Credit Card(For E-beam only) • UV MBoss replacement for traditional raised image foil stamping (L9213S).

  10. In-Line Magnets Manufacturing • Lay down high-profile magnetic UV at 3.5-4.5 mil via rotary screen coater (80/40 mesh). • Cure UV with Gallium doped V-bulb. • Magnetize UV with Multi-pole magnet roller. • Charged piece can either be sheeted or finished in-line like kiss die cut labels.

  11. In-Line Magnets • Allows magnets to be produced on paper (vs. vinyl). • Allows for personalization. • Allows for pattern application, reducing cost and waste. • Allows for pattern coating with a 1/16 inch border, SIGNIFICANTLY increasing life of dies • Postal savings due to 67% lower weight of piece.

More Related