1 / 18

Riso with Dual Feedback Op Amp Stability

Riso with Dual Feedback Op Amp Stability. Collin Wells Tim Green Precision Linear Analog Applications November 21, 2013. Riso with Dual FB Topology (OPA330 Example). Zo Test. Zo Test. Modified Aol. Zo and CL.

long
Download Presentation

Riso with Dual Feedback Op Amp Stability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Riso with Dual FeedbackOp Amp Stability Collin Wells Tim Green Precision Linear Analog Applications November 21, 2013

  2. Riso with Dual FB Topology (OPA330 Example)

  3. Zo Test

  4. Zo Test

  5. Modified Aol

  6. Zo and CL Modified Aol will have Complex Poles with sharp phase shifts anywhere CL Crosses Zo in Zo “Inductive” region.

  7. Modified Aol with CL

  8. Modified Aol with CL

  9. Zo, CL, Riso CL CL CL Riso=400ohms, CL=1uF Series Combination - Highest Z wins - Intersects Zo as Resistive Impedance CL CL Riso Riso Riso Riso Riso Riso

  10. Modified Aol with CL=1uF, Riso=400ohms

  11. Modified Aol with CL=1uF, Riso=400ohms Note: Modified Aol looks like an Aol with a second pole around 1kHz and a zero at about 20kHz No abrupt phase shifts and minimum phase is 29.488 degrees away from 180 degree total phase shift Modified Aol UGBW=56.5kHz with phase margin at 72.33 degrees

  12. FB#1 with CL=1uF, Riso=400ohms

  13. FB#1 with CL=1uF, Riso=400ohms FB#2 fz2 Net 1/Beta Lowest FB Wins! New fcl Note: At fcl, where loop gain goes to zero, there is a 40dB/decade rate-of-closure indicating INSTABILITY for FB#1 alone We will add FB#2 s shown for a Net 1/Beta which will be stable at new fcl

  14. FB#2 with CL=1uF, Riso=400ohms, RF=100k, CF=82nF

  15. FB#2 with CL=1uF, Riso=400ohms, RF=100k, CF=82nF

  16. Loop Gain for CL=1uF, Riso=400ohms Final Compensation

  17. Loop Gain for CL=1uF, Riso=400ohms Final Compensation Phase Margin

  18. Riso with Dual Feedback curves

More Related