920 likes | 2.69k Views
Stratified Randomization in Clinical Trials. Katherine L. Monti, Ph.D. Senior Statistical Scientist and Director of the Massachusetts Office, Rho, Inc. Adjunct Associate Professor, Biostatistics University of North Carolina. Outline. Introduction
E N D
Stratified Randomization in Clinical Trials Katherine L. Monti, Ph.D. Senior Statistical Scientist and Director of the Massachusetts Office, Rho, Inc. Adjunct Associate Professor, Biostatistics University of North Carolina
Outline • Introduction • Motivation for this work: “Stratification can’t hurt” • Literature search • Why stratify? Advantages • Why not stratify? Disadvantages • Considerations if stratification is going to take place • Alternatives • Limitations of the literature
Outline • Explore the notion that “stratification can’t hurt” • Description of the simulation • Results • Conclusions
Introduction • Stratification is generally undertaken so that treatment comparisons can be made within relatively homogenous groups of experimental units. • Stratification in clinical trials is different from classical stratification in survey sampling, or from blocking in experimental design.
Introduction • In survey sampling, the population is divided into subgroups (strata). There is a defined sampling frame. Each stratum is randomly sampled with a known sample size. • In experimental design, treatments are assigned within blocks, which are defined by factors that are generally determinable and often controllable (e.g., temp, water level in a greenhouse setting). Again, the sample size in each block is part of the design.
Introduction In clinical trials… • The sample size for each factor level is often unknown until the end of the study. • Exception: when sampling is halted differentially by strata to force balanced strata. • The “blocking” factors are generally not controllable (e.g., stage of disease, concomitant medication usage).
Introduction • Sometimes stratification is beneficial in clinical trials. • Some trialists maintain that it is never harmful. • Is that the case?
Motivation • A drug company’s design: • 120 subjects • 4 treatments (placebo, three drug doses) • 30 sites • 1 prognostic factor with 2 levels (hi and low levels, continuous covariate) • Randomization: • At each site, NOT centralized • In blocks of 4 within factor level within site
Motivation • 120 subjects / (30 sites) = 4 subjects per site With 4 treatments, perfect balance overall would occur without stratification. • 120 subjects / (30 sites x 2 levels) = 2 subjects per site for each levelWith 4 treatments, balance is not assured if randomization occurs within level.
Motivation • Do we really expect 4 subjects to enroll per site? No • There will be some imbalance among the treatments even if randomization is performed just within site, without regard to level.
Motivation • Those designing the study thought that randomizing within factor level • would increase balance in the design • “couldn’t hurt” • Others argued that randomizing within factor level would increase the overall imbalance in the design.
Literature • What does the literature have to say about stratification in clinical trials? • When is stratification beneficial? • When is stratification harmful? • Does the literature suggest that stratification “couldn’t hurt”?
Why stratify? Advantages • Keep variability of subjects within strata as small as possible and between-strata variability as large as possible in order to have the most precision of the treatment effect (Chow and Liu, 1998) • Avoid imbalance in the distribution of treatment groups within strata • Efficiency, credibility
Why stratify? Advantages • Protect against Type I and Type II errors • Avoid confounding • Satisfy prevailing investigator preconceptions about study design • Provide credibility to choice of analysis covariates • Stratification variables are definitely specified a priori.
Why not stratify? Disadvantages • Gains (power/efficiency) that can occur with stratification is often small, particularly once (# subjects) / (# treatments) > 50 • More costly • More complicated trial • Greater opportunity to introduce randomization error
One Alternative: Adaptive allocation • Dynamic allocation / adaptive allocation • Minimization by Taves • Pocock and Simon’s method • Zelen’s method • Begg and Iglewicz • Others
Minimization • Keep track of the current imbalance and assign the treatment to a new subject to reduce the existing imbalance between strata • Advantages: • Produces less imbalance than simple permuted blocks • Canaccommodate more factors
Minimization • Disadvantages: • Need to keep track of current imbalance (central randomization) • None of the assignments are completely random • Since it only aims to balance marginal totals of multiple factors, precision is only increased if the interaction between prognostic factors is not pronounced. (Tu et. al., 2000)
Another Alternative: Post-stratification • If stratification is not done at randomization, covariate analysis can be performed. • Easier and less costly to implement • Often nearly as efficient • May be less convincing, particularly if covariate was not mentioned in the protocol • Cannot correct for cases of extreme imbalance or confounding of covariates
Consider • How well is the stratification variable measured? • If the covariates used to stratify are imprecisely assessed, then may introduce error. • Is the stratification variable related to outcome? • If not, the gain in efficiency may be small or negative. • How many strata will there be?
Number of Strata The number of strata to allow depends on: • Total number of subjects in the trial • Expected number to be in each stratum • Predictive capability of prognostic factors • Type of allocation scheme (permuted blocks vs. dynamic allocation)
Number of Strata • The number of strata should be less than (total sample size) / (block size). (Hallstrom and Davis, 1988) • In our case, N=120, B=4, • Recommendation: < 30 strata • Design: 60 strata • Stratification begins to fail (in terms of balance) if the total number of strata is greater than approximately N/2 (for 2 treatments). (Therneau, 1993) • or N/k, k= number of treatments
Number of Strata • “One can inadvertently counteract the balancing effects of blocking by having too many strata.” “…, most blocks should be filled because unfilled blocks permit imbalances.” (Piantadosi,1997)
Number of Strata • “If ‘institution effect’ were to be introduced as a further prognostic factor, …, the total number of strata may then be in the hundreds and one would have achieved little more than purely random treatment assignment.” (Pocock and Simon, 1975)
Number of Strata • And thus we see that there are some warnings in the literature about employing too many strata. • However….
Conclusions of the Literature Search Authors are still concluding that “Stratification is … harmless always, useful frequently, and important rarely”. (Kernan et al., 1999) (Caveat: Elsewhere in the article, Kernan et al recommend against overstratification, but this is the topic sentence of their discussion section.)
Limitations of the Literature • Literature refers mostly to trials of two treatments. • In the statistical literature, little attention is paid to operational disadvantages of more complex designs.
Conclusions of the Literature Search Consider stratifying only if: • Prognostic factors are known to be related to the outcome and are easy to collect prior to randomization. • Operational costs justify any gain. • Sample size is small ( N < 100), but the stratified design does not induce imbalance. • The number of strata should be less than (total sample size) / (block size).(Hallstrom and Davis, 1988)
“Stratification can’t hurt.” The notion that stratification “couldn’t hurt” remains in current literature is being advanced by some trialists This conclusion should be reconsidered.
“Stratification can’t hurt.” • The remainder of the talk will • Review the motivating example • Describe a simulation to explore the notion that “stratification can’t hurt” • Summarize the results • Provide conclusions
Motivation • A drug company’s design: • 120 subjects • 4 treatments (placebo, three drug doses) • 30 sites • 1 prognostic factor with 2 levels (hi and low levels, continuous covariate) • Randomization: • At each site, NOT centralized • In blocks of 4 within factor level within site
Operational Difficulties Randomization was actually done within strata within site • Drug supply requirements increased. (~ 33%) • Packaging/shipping costs increased. • Additional training visits to sites were needed in order to explain the more complex randomization scheme. • The project management burden increased considerably. • The misassignment of subjects to treatment was more likely.
Imbalance • 120 subjects/ (30 sites) = 4 subjects per site Perfect balance with 4 treatments • However, 4 subjects enrolling at each site is not really expected! Perfect balance overall is not expected.
Imbalance • Additional restriction on randomization to within level of the prognostic factor within site could only increase the imbalance. • How much worse does it get?
Simulation • I set out to compare the magnitude of the treatment imbalance if randomization were performed in permuted blocks of 4: • within site (WS) (30 strata) • within level of the factor within site (WLWS) (60 strata) • I used simulation.
Simulation • The general approach was this: • I don’t now how many subjects would enroll in each site, so I used a variety of guesses regarding the enrollment pattern. • I don’t know how many subjects in each strata are going to enroll, but I assumed an underlying 50:50 ratio and forced 50:50 enrollment in some cases. • I don’t know in what order subjects will enter the trial, but I assumed that subjects enter randomly with respect to their strata status in each site.
Simulation • Once I “identified” the number of subjects in each strata at each site and the order in which they enrolled, I randomized them to treatment twice: once randomly WS and once randomly WLWS. • Did that 10,000 times for each enrollment pattern. • Compared the balance of WS to WLWS randomization.
Enrollment Patterns • To assign subjects to treatments, we need to know the the number of subjects ( Nij ) • in site i (i=1-30) who have • factor level j (j=1,2) The Nij are unknown….
Enrollment Patterns …So we make assumptions • However, instead of prescribing the exact Nij for each i and j in the simulation, I defined 9 different enrollment patterns for the 60 site/level combinations.
Enrollment Patterns • Each enrollment pattern assumed a distribution of the number of subjects in the 60 site/levels, so that there were: • 30 sites, 2 levels per site • 0-8 subjects in each of the 60 site/level strata • 120 subjects • Some enrollment patterns forced balance between the factor levels: N.1 = N.2 = 120/2 = 60 subjects per stratum
No. Subjects Enrollment Plan 1 2,3* 4,5* 6,7* 8 9 0 6 10 5 30 1 20 14 12 11 2 60 20 16 16 15 3 20 14 12 8 4 6 10 6 30 5 2 6 1 7 1 8 1 Entries are the number of strata having the indicated number of subjects. * Plans forced a balance between strata across sites (60 subjects per strata overall).
An Enrollment Pattern • EX: Pattern 2: • 20 site/levels strata w/ 3 subjects • 20 site/levels strata w/ 2 subjects • 20 site/levels strata w/ 1 subject Total of 60 site/level strata w/ 60+40+20 = 120 subjects Here, Nij = 1, 2 or 3 • Given that pattern • The 60 strata were randomly paired to construct 30 sites. • Ni1 / Ni2 for site i could be any of the following: 3/3, 3/2, 3/1, 2/3, 2/2, 2/1, 1/3, 1/2, or 1/1
An Enrollment Pattern • In Pattern 2, it is unlikely that the factor levels will be exactly balanced overall. • EX: Pattern 3 forces a 60/60 split • 20 site/levels strata w/ 3 subjects (10/10 split) • 20 site/levels strata w/ 2 subjects (10/10 split) • 20 site/levels strata w/ 1 subject (10/10 split)
Enrollment Patterns • To compare the balance in treatment assignment when randomizing WS and WLWS, I assigned subjects to treatments • at each site and then reassigned • in each level at each site
Simulation • Used SAS PROC PLAN to generate treatment assignments in permuted blocks of 4 • for 30 sites and • for 30 sites with 2 factor levels per site
Evaluation Criteria • For each enrollment pattern, we want to be able to compare the treatment balance when randomization is performed WS and WLWS using permuted blocks of 4 treatments.
Evaluation Criteria • There are two types of treatment balance: • Overall balanceThe extent to which the treatment assignments are balanced overall. • Within-level balanceThe extent to which the treatment assignments are balanced within each of the 2 factor levels.
Evaluation Criteria • 4 criteria used to assess the randomization results of each simulated run are reported here: • N[1] = smallest N of the 4 treatments • N[1] + N[2] = smallest total sample size for any comparison of treatments • % loss of power compared to a completely balanced design for the comparison based on N[1] + N[2] for a study designed for 90% power • N[4] – N[1] = maximum difference in sample sizes
Evaluation Criteria • Overall, treatment balance would beachieved if • N1 = N2 = N3 = N4 = 120/4 = 30 • N[1] = 30 • N[1] + N[2] = 60 • No loss of power relative to complete balance • N[4] – N[1] = 0