1 / 15

Hand Saws

Hand Saws. Cross Cut Hand Saw. Use for woodcutting across the wood grain Usually 24 inches to 26 inches long with 8 to 11 TPI Doesn't cut as aggressively as rip saws but leaves a much smoother edge. Rip Hand Saw. Use for woodcutting with the wood grain

luella
Download Presentation

Hand Saws

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hand Saws

  2. Cross Cut Hand Saw • Use for woodcutting across the wood grain • Usually 24 inches to 26 inches long with 8 to 11 TPI • Doesn't cut as aggressively as rip saws but leaves a much smoother edge

  3. Rip Hand Saw • Use for woodcutting with the wood grain • Usually 24 inches to 26 inches long with 4 to 7 teeth per inch (TPI) • Cut very aggressively and leave slightly rough edge

  4. Sway-back Saw(can be a crosscut or ripsaw) The Sway allows you to put a slight curve in the cut

  5. Straight-back Saw(can be a crosscut or ripsaw)

  6. Coping Saw • Use for fine woodcutting, coping moulding joints • Has deep steel tension frames and very thin blades to make intricate cuts at extreme angles

  7. Coping Saw

  8. Back Saw • Use for fine woodcutting, moulding and trim • Has a rigid piece along the back to prevent the saw from kinking during use

  9. Key Hole Saw • Use for circle and curve cutting in wood • Has very thin, pointed blades for cutting small, tight radius curves and holes

  10. Drywall Saw • Use for circle and curve cutting in wood • Has very thin, pointed blades for cutting small, tight radius curves and holes

  11. Panel (short cut or box saw) • Use for woodcutting across the wood grain • Usually shorter than regular cross cut saws, for easy portability

  12. Japanese (pull) saw • Use for fine woodcutting, moulding and trim • Cuts on the pull stroke to give greater control and eliminates the possibility of the saw kinking in the kerf

  13. Hack Saw • Use for metal cutting • Has very fine teeth and thin blades, held under tension in a steel frame

  14. Door Jamb Saw • Used to cut door jambs and other obstacles to allow for flooring to fit underneath.

  15. Bow Saw • Use for woodcutting and pruning in any direction • Has a tubular steel frame with a ribbon-like, high-tension steel blade

More Related