Presentation Transcript

1. Paper

   Making the Right Choice
2. Paper can be the most expensive component in a publication—often 30-50%of the total cost.
3. Factors that affect cost What size paper does the publication require? Which paper stock is appropriate and meets the budget? How will the paper be folded, bound, delivered?
4. Standard U.S. Paper Sizes Business card—2x3.5 Index card—3x5, 4x6, 5x8 Letter—8.5x11 Legal—8.5x14 Tabloid—11x17 U.S. sizes are measured in inches; European paper is measured in metrics. http://www.printernational.org/ http://desktoppub.about.com/cs/intermediate/a/measure_paper.htm
5. Paper Stock The publication itself and the method of printing will typically determine the paper stock needed. Bond Cover stock Newsprint Book Coated Glazed (glossy) Matte Acid-free Vellum Safety Linen Bible Parchment Granite Deckle edge
6. Paper Stock Another factor in selecting the correct paper stock is the paper weight Definition: The actual weight in pounds of 500 full sheets of paper regardless of the basic size or grade of paper; also known as ream weight (500 sheets = ream) Basic Size Example: bond paper 17x22, cover stock 20x26 If 500 sheets of bond paper at 17x22 weighs 20 pounds, the paper is described as 20# paper
7. Paper Folds Paper folds can add interest to a publication and catch the reader’s attention. It can also add to the cost of the publication. Publications can be folded by hand or by using an automatic paper folder
8. Paper Folds Accordion—a zig-zagfoldwith parallel folds that go in opposite directions; alsoknown as zig-zag OR z-fold Gate fold—folds the sidesin toward the middle of a page
9. Paper Folds Tri-fold—two parallel foldsresulting in three panels on each side of the paper; also known as brochure fold or spiral fold Half fold—divides the page in half; often called a booklet fold
10. Paper Binding Definition: the joining of pages with either wire, glue or other means If a multiple-page document requires binding, there are a number of choices. The most frequent choices are: saddle stitch, punch and bind and perfect binding. Any binding choice will increase the cost of the publication
11. Saddle Stitch Saddle stitch—a type of binding that staples down the middle of folded pages; frequently used to assemble booklets
12. Spiral Binding Spiral binding----type of binding that secures pages by using metal combs/wires or plastic combs that fit into holes punched along the edge of the pages; allows the publication to lay flat when opened.
13. Perfect Binding Perfectbinding—to bind pages together with glue to create a book; technique used on paperback books.