1 / 5

Instrument guide: Water temperature, Lifeboat

Instrument guide: Water temperature, Lifeboat. Simone Kotthaus 16/07/2010 version1. Tinytag Aquatic 2: TG-4100. Contact information Lifeboat Pier Manager: Janet Kelly (jkelly@rnli.org.uk) Stuart Morrison, Kevin Maynerd. Instructions on site Equipment needed:

lumina
Download Presentation

Instrument guide: Water temperature, Lifeboat

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Instrument guide: Water temperature, Lifeboat Simone Kotthaus 16/07/2010 version1

  2. Tinytag Aquatic 2: TG-4100 Contact information Lifeboat Pier Manager: Janet Kelly (jkelly@rnli.org.uk) Stuart Morrison, Kevin Maynerd

  3. Instructions on site • Equipment needed: • Laptop Roof5 (make sure battery is charged!) • Tinytag USB Inductive Pad ACS-3030 (SN# 570340) • Tissue • Go down to Lifeboat pier, ring the bell and say, you are coming from Kings to download temperature data. • The sensor is in the tube at the end of the peer on the right hand side. • Take care when walking outside the railing – they provide life jackets. • Open Tinytag Explorer, connect Inductive Pad to COM18. • Dry data logger with tissue and place centred on USB pad • Press button: download data by pressing ‘Get Data from the Logger’ button in the tool bar. • Press ‘Open the Table of readings view’ in the toolbar - The data will be displayed as a table. • Save data to C:\LifeboatTinytag\LBYYMMDD_YYMMDD.ttd with start and end date.

  4. 1 2

  5. Instructions back at Kings • Press ‘Export data in other format’ in the toolbar, save file as rawTwater_YYMMDD_YYMMDD.csv, again with start and end date. • Copy .ttd and .csv files to I:\Data\YYYY\London\ALL\TLI\ • Manually run D:\Roof\waterTemperature\RiverTempNCDF.m, a Matlab script that converts .csv into netcdf format and updates KUMA content.

More Related