1 / 12

“Generating value through knowledge”

Engineering and Industrial Development Centre. “Generating value through knowledge”. ACTUAL CAPACITIES. R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY. Autoclave, Econoclave 2×4, ASC Process Systems.

lynelle
Download Presentation

“Generating value through knowledge”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering and Industrial Development Centre “Generating value through knowledge”

  2. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY Autoclave, Econoclave 2×4, ASC Process Systems • Composite material specimen preparation. Hand lay up with prepreg. Preparation in autoclave and hot plates compression press. (laminates of fiber reinforced composite materials with polymeric matrix, different fiber orientation). • Determination of mechanical properties; complete characterization considering the material anisotropy. Tension, compression, bending testing at temperatures -129 a 540°C. • Fatigue and fracture analysis of composite materials: High cycle fatigue, low cycle fatigue, fracture toughness, Poisson modulus, interlaminar shear, dynamic testing. • Nondestructive testing of composite materials, using ultrasonic with phase arrays, immersion ultrasonic, “C” scan, Lamb waves, acoustic emission, radiography, infrared thermography. • Failure analysis of composite materials using optical microscopy and scanning electron microscopy. • Noise and vibration analysis. Manual Hydraulic Compression Press, Q-230H, PHI Mechanical Testing System MTS-810 Instron 8872 SEM

  3. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY BODE 100 - PC Controlled vector network analyzer • ASTM D 3529/D 3529M – 97 (Reapproved 2008) Standard test method for matrix solids content and matrix content of composite prepreg. • ASTM D 3530/D 3530M – 97 (Reapproved 2008) Standard test method for volatiles content of composite material prepreg. • ASTM D 3531 – 99 (Reapproved 2004) Standard test method for resin flow of carbon fiber-epoxy prepreg. • ASTM D 3532 – 99 (Reapproved 2004) Standard test method for gel time of carbon fiber-epoxy prepreg. OMNISCAN MX PA, OLYMPUS Ultrasonic immersion system Hopkinson bar Noise and vibration analysis Infrared thermography

  4. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY • MECHATRONICS FOR INDUSTRY. Turnkey automation solutions: Assembly & automated manipulation; Machinery for special testing • ASSEMBLY. Design and integration of solutions in: Automated transport & transfer systems; Handling & integration of robots; Positioning & indexing systems. Insertion, clamping, riveting & other assembly operations. • MACHINING. Machining Solutions: Automated drilling systems; Automated regrinding systems; Other machining operations. • TESTING. Design of special machines for inspection testing: Machines for inspection in industrial laboratories; Machines for automated testing; Machines for the inspection and operations of in-line testing; Optical machines. • AUTOMATION SIMULATION AND MACHINERY ANALYSIS. FEM & dynamic analysis; Production line simulations & human factors. • APPLIED ELECTRONICS. Integrated systems in industrial inspection for: • Product quality checking, detection of defects; Barcode inspection in 1d & 2d; Assembly verification; Inspection of dimensions.

  5. ACTUAL CAPACITIES R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY • ADVANCED MANUFACTURING • Product Design: Design and development of structural components for manufacturing processes and assembly with DELMIA-CATIA (Robotics simulations & work cells design) • Modeling and simulation • Plastic and other materials prototype manufacturing • Rapid prototyping by stereolitography • High speed and high precision machining • Die and tooling manufacturing • Manufacturing processes development • Optimization of operations sequence, production logistics and production diagnostic systems. • (Aluminum, Stainless Steel, Alloy Steels, Titanium, Engineering plastics)

  6. ACTUAL CAPACITIES • NDT • NON DESTRUCTIVE INSPECTION • (MM-063-006/08) • Radiography (RT) Testing • Ultrasonic Testing • Magnetic Particle Testing • Leak Testing • Eddy Current Testing • Visual testing • Fluorescent penetrant examination in aerospace components Certified Personnel ASNT LEVEL III AND NAS 410

  7. ACTUAL CAPACITIES Acredited on ISO-IEC-17025-2005 (NMX-EC-17025-IMNC-2006) OTHERMETALLURGICAL SERVICES • Metallography and Failure Analysis • (MM-0031-006/08) • Chemical Analysis • (Q-093-073/09 ema) • Mechanical Testing • (MM-065-006/08)

  8. ACTUAL CAPACITIES METROLOGY SERVICES • Management of metrological confirmation programs of measuring equipment. • Installation and set up at operation of calibration laboratories. • Specialized training in Metrology (Courses and Diplomas). • Specializes Consulting in measurement assurance with the MESURA program ® by CENAM and technological institutions. • Development of models and software for estimating uncertainties in measurement processes. • Development and manufacture of measurement equipment.

  9. ACTUAL CAPACITIES METROLOGY SERVICES Accreditation NMX-EC-17025-IMNC-2006 Certification NMX-CC-9001-IMNC-2000 Calibration and Measurements: • Dimensional Qro. (D-39 ema), S.L.P. (D-102 ema), G.M. Silao (D-108 ema) • Mass (M-31 ema) • Density (DEN-06 ema) • Volume (V-19 ema) • Flow (FL-14 ema) • Pressure (P-58 ema) • Temperature (T-24 ema) • Humidity (H-09 ema) • Torsionaltorque, S.L.P. (PT-19 ema) • CANHEFERN • Electric (E-85 ema) • Time & Frecuency (TF-14 ema) • MIDE • Gas Flow (FL-016 ema)

  10. POTENTIAL CAPACITIES POTENTIAL CAPACITIES ON R&D AND SPECIALIZED SERVICES (no equipments available) • Flammability analysis • Permeability and water absorption analysis • Porosity analysis • Effect of humidity in composite materials • Electrical discharge reception in composite materials • Inspection by shearography • Environmental conditioning • High velocity impact testing • Other validation tests, according with special client requirements

  11. IDENTIFIED COLLABORATION OPPORTUNITIES CoopAIR - CIDESI “Generating value through knowledge”

  12. Engineering and Industrial Development Centre Tank you very much “Generating value through knowledge”

More Related