330 likes | 524 Views
IMMERSE 2009 Kick-off Meeting . April 15, 2009 Brigham Young University. IMMERSE 2009 Students. Steven Allen beaveadore@yahoo.com Jesus Arellano jesusmuguruza@hotmail.com Chris Carron soma34@gmail.com Spencer Chadderdon titomalito@hotmail.com
E N D
IMMERSE 2009Kick-off Meeting April 15, 2009Brigham Young University
IMMERSE 2009 Students Steven Allen beaveadore@yahoo.com Jesus Arellano jesusmuguruza@hotmail.com Chris Carron soma34@gmail.com Spencer Chadderdon titomalito@hotmail.com Satyan Chandra satyanchandra@hotmail.com Alisha Gillis alisha.gillis@gmail.com Doug Hulbert geniusboy21@hotmail.com Jared Keeleyjamakee@hotmail.com Daniel Perry danieltheperry@googlemail.com Brock Peterson brockap3@comcast.net Mallory Phillips mallory.phillips.byu@gmail.com Brady Quist bradyq@gmail.com Hannah Quist bananasplit343@hotmail.com Bryson Shreeve bshreeve@hotmail.com Roy Shuldberg royshuldberg@hotmail.com Andrew Sielercheerios@q.com Eric Teng e_teng487@yahoo.com Lynell Wright ulaney@yahoo.com
Bangerter/ Mazzeo Hawkins Technical SubGroups IMMERSE Schultz Coordinator: Mallory Phillips Team: Doug Hulbert Jared Keeley Mallory Phillips Hannah Quist Roy Shuldberg Eric Teng Lynell Wright Coordinator: Alisha Gillis Team: Chris Carron Spencer Chadderdon Alisha Gillis Daniel Perry Bryson Shreeve Andrew Sieler Coordinator: Jesus Arellano Team: Steven Allen Jesus Arellano Satyan Chandra Brock Peterson Brady Quist
HAWKINS - ARROWs ARROW stands for Anti-Resonant Reflective Optical Waveguide. These structures are unique because they allow for the guiding of light in waveguides with air or liquid cores. The purpose of this project is the fabrication and study of ARROW structures and the construction of photonic devices built using ARROWs. Project sponsored by NIH, NSF, and DARPA. Project relies on: Advanced Lithography Development, Metal and Dielectric Deposition, Chemical Etching of Core Materials, Research in Micro-fluidic Handling and Packaging, Scanning Electron Microscopy
HAWKINS – ION TRAPS Ion traps are the heart of a new family of mass spectrometers that are portable and low cost. We construct these ion traps using microfabrication to pattern metal electrodes on ceramic substrates and then tailoring the electric field across these electrodes with discrete capacitors on a matching PCB. Project sponsored by NASA. Project relies on: Advanced Lithography Development, Metal and Dielectric Deposition, Chemical Etching, PCB Design, Solder attachment and packaging
HAWKINS – SILICON DEVICES Solid-state Impact-ionization Multipliers This involves the production of silicon amplifiers based on impact ionization effects. These amplifiers are three electrode devices meant to be used with arbitrary current sources, especially photodiodes. Sponsored by NSF. Project relies on: Advanced Lithography, Metal and Dielectric Deposition, Silicon Processing, Electrical Testing, Understanding of silicon properties
SCHULTZ - Optical Fiber Devices • Fiber Grating Interrogator • Measure the wavelength spectrum of a fiber sensor • Use a tunable optical filter and a broad wavelength source • Make a ring laser for higher optical power • Fiber core replaced devices • Deposit active material into the core of an optical fiber • Create in-fiber device • In-fiber electric field sensor
Bangerter – magnetic Resonance imaging Improved B1 Mapping in the Presence of Noise This project seeks to improve the ability to create RF field maps for MRI in situations with very low inherent SNR. Partial Volume Correction for Sodium MRI Sodium MRI suffers from low SNR, leading to large image voxel sizes and partial-volume issues. This project seeks to improve the measurement of sodium concentrations with MRI by co-registering 23Na images with higher-resolution 1H scans. LAMA-SSFP: Simultaneous Fat Suppression and Band Reduction in MRI In this project, we are developing a new MRI method to suppress unwanted lipid signal while simultaneously reducing so-called “banding artifacts” in the images. All projects rely on advanced signal/statistical processing models, noise analysis, image acquisition modeling, image processing, and familiarity with MRI scanning techniques.
Mazzeo - DielectriC Spectroscopy Dielectric spectroscopy of liquid solutions probes the electrical properties of dispersed particles such as proteins. This approach is unique because it reveals the electrical structure of molecules and can track intermolecular interactions over time. Specifically, this research will be looking at electrical interactions in the formation of amyloid fibrils, which are implicated in disease. Project relies on: Thermal Stabilization, Electromagnetic Modeling, Instrument Control and Communication, Signal Processing, Liquid Handling and Measurement
Websites/ Tutorials Outreach Documentation Projects IMMERSE New Classes Team Lynell Wright Mallory Phillips Eric Teng Team Hannah Quist Chris Carron Alisha Gillis Roy Shuldberg Spencer Chadderdon Bryson Shreeve Team Doug Hulbert Daniel Perry Andrew Sieler Jared Keeley Jesus Arellano Satyan Chandra
OUTREACH • Specific Topics • Update IMMERSE website – pictures, new students, more bios, project descriptions • Assist with faculty webpages • Email IMMERSE newsletter • Devise activities for lab interactions with SOAR students. These can include lab tours, displays, use of microscopes, posters • Construct other hands on hall displays
NEW CLASSES • New Student Seminar • Redo Communications and Computer Systems Labs • Free Space Optics Senior Project • Determine set of components for senior project • Determine packaging • Determine specifications • Website for FSO Senior Project • Free Space Optics ECE313 Labs • Make new set of labs for ECE313 centered around a free-space optics link • Portable Free Space Optics Demonstration • 1) Make a portable FSO demonstration unit
WEBSITES / TUTORIALS • Cleanroom Website • Equipment Operating Instructions • Wire bonder • 4 point probe • NI Parameter Analyzer • Cleanroom Operation Pages • Authorized User Page • Videos of common procedures (clean up spinners, gowning, startup and shut down – add to test) • Add pictures to contact info • Reference Information • RIE etch rates for SiN – Anelva • Survey of available photoresists • Deionized water – how it’s produced, commercial system providers, measurement • Ellipsometer calculator – convert to web based www.ee.byu/cleanroom Photonics Website
Meeting Structure • Weekly MME Meeting – Entire Group • Bring Up Common Problems and Concerns • Student Presentations on Projects • Led by Faculty Members • Weekly Project Meetings – Sub Groups • Correlate Weekly Goals and Strategy • Report Results • Coordinator Gathers Reports and Tracks Results • Faculty Member Present • Weekly Documentation Meetings – Sub Groups • Correlate Weekly Goals and Strategy • Report Results • Faculty Member Present
Technical Presentations Week ofTopicPresenter April 23 How to Give a Presentation Dr. Hawkins April 30 Tubes without walls Alisha Gillis May 7 May 14 May 21 May 28
Chris Carron • Research Responsibility: Using newly developed microfluidic tube process, create “Tubes Without Walls” structures • Make new masks suitable for Tubes without walls • Fabricated Tubes without walls • Develop processes for selectively coating layers either hydrophobically or hydrophilically Secondary Project Description: Perform SEMs for various projects Documentation Assignment: New Class Development Group 1) Get Free Space Optical Display working in hallway 2) Make new portable FSO displays 3) Work on FSO senior project ** Make a portable FSO demonstration unit
Spencer Chadderdon • Research Responsibility: Build a high speed (100kHz) optical spectrum analyzer • Build a high speed tunable ring laser • The optical ring includes an optical amplifier and a tunable optical filter • Integrate the tunable ring laser with a high speed data acquisition card. • Documentation Assignment: • New class development group • Work on new labs for ECE313 centering on building a free space optical communication link with an LED and a detector Mentor: Joshua Kvavle
Alisha gillis Research Responsibility: Tubes without walls project Work with C. Carron on selectively coating layers. Devise tests to determine hydrophobicity. Find coatings that will remain after lithography steps. Documentation Assignment: New Class Development Group 1) Get Free Space Optical Display working in hallway 2) Make new portable FSO displays 3) Work on FSO senior project ** Make a portable FSO demonstration unit
Doug Hulbert • Research Responsibility: Slow Light in hollow core waveguides • Assist with fabrication of ARROW chips for slow light project • Characterize stress in silicon dioxide and silicon nitride films as a function of pressure, gas flow, gas percentage, etch rate in HF, index • Try to improve cleaving yield by pre-nicking with dicing saw • Documentation Assignment: Cleanroom Webstie • Cleanroom Operation Pages • Authorized User Page • Videos of common procedures (clean up spinners, gowning, startup and shut down – add to test) • Add pictures to contact info • Reference Information • RIE etch rates for SiN – Anelva • Survey of available photoresists Mentor: John Hulbert
Jared Keeley • Research Responsibility: ARROWs for liquid core biosensors • Assist with building ARROW based chips using previously developed designs – thin film deposition, SU8 lithography, RIE etching • Measure etch rates with alternative sacrificial cores – photoresist and PMGI • Documentation Assignment: Cleanroom Website • Equipment Operating Instructions • Wire bonder • 4 point probe • NI Parameter Analyzer • Reference Information • Deionized water – how it’s produced, commercial system providers, measurement • Ellipsometer calculator – convert to web based Mentors: Yue Zhao, Brian Phillips Goals for First 2 Weeks: Get authorized for cleanroom use, learn basic lithography, learn use of PECVD machines, sputtering machine, learn SU8 lithography, learn thin film measurement tools - ellipsometer
Daniel Perry • Research Responsibility: Slab coupled optical sensors • Fabricate electric field sensors using resonant coupling between a crystal and the core of a D-shaped optical fiber • Documentation Assignment: • Webpage Development Group • Develop online resources for the Photonics website Mentor: Rich Gibson
Mallory Phillips Research Responsibility: Tapered sacrificial layer, PDMS packaging 1) Develop method for creating tapered photoresist slabs (0 to 200 nm thick over 1 cm width – multiple patterns on same wafer) 2) Develop method for laser cutting PDMS for versatile reservoirs attached to microfluidic chips • Documentation Assignment: Outreach group • Update IMMERSE website – pictures, new students, more bios, project descriptions • Assist with faculty webpages • Email IMMERSE newsletter • Devise activities for lab interactions with SOAR students. These can include lab tours, displays, use of microscopes, posters • Construct other hands on hall displays Graduate Student Mentor: Mark Hamblin for tapering
Hannah Quist • Research Responsibility: Microfabricated Ion Traps • Fabricate ceramic plates with patterned electrodes for ion trapping • Design and fabricate PCBs with on chip capacitors for electric field shaping • Perfect soldering process for capacitors so there is as little change in capacitance as possible before and after soldering • Documentation Assignment: New Classes Group • Main Emphasis - New Student Seminar • Devise new web-based exercise for Communications Lab • Create new web-based exercise for Computer Systems Lab Mentor: Brett Hansen Goals for First 2 Weeks: Get authorized for cleanroom use, learn basic lithography, learn use of PECVD machines, sputtering machine, learn SU8 lithography, learn thin film measurement tools - ellipsometer
Roy Shuldberg • Research Responsibility: Silicon devices • Assist in the fabrication of SIM devices in the cleanroom • Test current vs. voltage characterisitics for SIMs • Analyze I V data to classify devices • Test solar cells modified by external affiliates • Documentation Assignment: New Classes Group • Make new set of labs for ECE313 centered around a free-space optics link • Assist with making new web-based labs for New Student Seminar Mentors: Josh Beutler and Michael Johnson Goals for First 2 Weeks: Get authorized for cleanroom use, learn basic lithography, learn basic fabrication process from Josh Beutler, learn how to measure SIMs using 4156, develop database for storing device data
Bryson Shreeve • Research Responsibility: Project with the Department of Neurosciences • Build a prototype wireless head gear that incorporates EEG electrodes and LEDS with different light levels • Documentation Assignment: • New Class Development Group • Work on new labs for ECE313 centering on building a free space optical communication link with an LED and a detector Mentor: No student Mentor
Andrew Sieler • Research Responsibility: Core replaced D-fiber optical devices • Develop devices based on chemical etching of D-fibers to selectively remove part of the optical fiber core and place electro-optic materials into the core region • Help with packaging and testing of fabricated devices • Documentation Assignment: • Webpage Development Group • Develop online resources for the Photonics website Mentor: Joshua Kvavle
Eric Teng • Research Responsibility: Microfluidic Analysis Chips • Assist with fabrication of sacrificially etched channels on glass substrates using • a) photoresist and low temperature oxide • b) PMGI and high temperature oxide • Prepare and attach PDMS reservoirs to chips • Package chips on copper boards • Documentation Assignment: Outreach Group • Update IMMERSE website – pictures, new students, more bios, project descriptions • Assist with faculty webpages • Email IMMERSE newsletter • Devise activities for lab interactions with SOAR students. These can include lab tours, displays, use of microscopes, posters • Construct other hands on hall displays Mentor: Tao Shang Goals for First 2 Weeks: Get authorized for cleanroom use, learn basic lithography, learn chip fabrication from Tao, learn how to make PDMS reservoirs from Tao, produce first set of chip devices
Lynellwright • Research Responsibility: Assist with the production and evaluation of nanosieve chips including the development of a tapered metal deposition process • Create nanosieving chips using aluminum sacrificial layers and glass overcoats. Evaluate chips using fluorescing nanoparticles. • Develop a metal deposition process that creates a tapered layer thickness ranging between 5 and 100 nm. This will involve making stencil masks so multiple tapered patterns can be deposited on the same wafer • Documentation Assignment: Outreach Groups • Update IMMERSE website – pictures, new students, more bios, project descriptions • Assist with faculty webpages • Email IMMERSE newsletter • Devise activities for lab interactions with SOAR students. These can include lab tours, displays, use of microscopes, posters • Construct other hands on hall displays Graduate Student Mentor: Mark Hamblin
Steven Allen • Research Responsibility: Assist with the development of an improved B1 mapping technique in the presence of noise. • Gain an understanding of the literature and existing dual-angle mapping techniques. • Assist in implementing a phase-based B1 mapping technique for sodium MRI • Test the technique in phantoms with our new sodium birdcage knee coil • Analyze the noise characteristics of the new technique, and compare with existing dual-angle methods • Write up results • Documentation Assignment: MRI Group Website • Update MRI website – pictures, new students, more bios, project descriptions • Assist with faculty webpage.
JESUS ARELLANO • Research Responsibility: Instrumentation control and parameter extraction • Develop LabVIEW control system to control all parameters in dielectric spectroscopy of liquids. • Develop MATLAB routines for calibration and automated parameter extraction. • Titrations of protein solutions. • Documentation Assignment: • Webpage Development Group • Develop online resources for impedance analyzer control. • Develop online resources for MATLAB parameter extraction. • Develop online resources for precision liquid handling and measurement.
SATYAN CHANDRA • Research Responsibility: Thermal stabilization of dielectric spectroscopy apparatus • Fabricate dielectric cell with integrated thermal fluid flow. • Characterize thermal stabilization for 0-50 °C. • Titrations of protein solutions. • Documentation Assignment: • Webpage Development Group • Develop online resources for thermal control. • Develop online resources for precision balance operation. • Develop online resources for precision liquid handling and measurement.
Brock peterson • Research Responsibility: • Project: Partial volume correction for accurate Sodium concentration quantitation in MRI • Dual-tuned RF coil development and testing • Image registration algorithm development (Sodium-23 with Hydrogen-1) • Initial testing • Organization and writing up of results for abstract or journal publication Documentation Assignment: Website creation, development and coordination Wiki (Research Journal) for group
Brady Quist • Research Responsibility: Assist with the development of LAMA-SSFP, a new method for simultaneous fat suppression and banding artifact reduction in MRI • Implement a region-growing algorithm for approximating field map and fat/water boundaries in MRI images • Acquire initial phantom data and analyze performance of new technique • Apply technique to in vivo angiograms obtained at the University of Utah • Write up results • Documentation Assignment: MRI Group Website • Update MRI website – pictures, new students, more bios, project descriptions • Assist with faculty webpage.