1 / 17

KHABAROVSK REFINERY HYDROPROCESSING PROJECT ARU / SWS – MAIN EQUIPMENT

KHABAROVSK REFINERY HYDROPROCESSING PROJECT ARU / SWS – MAIN EQUIPMENT. TRAINING COURSE. APRIL 29th – MAY 3rd 2013, MADRID, SPAIN. MAIN EQUIPMENT DESCRIPTION. ARU IS EQUIPPED WITH THE FOLLOWING MAIN EQUIPMENT:. RICH AMINE FLASH DRUM AMINE REGENERATOR AMINE SUMP DRUM

mae
Download Presentation

KHABAROVSK REFINERY HYDROPROCESSING PROJECT ARU / SWS – MAIN EQUIPMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KHABAROVSK REFINERY HYDROPROCESSING PROJECT ARU / SWS – MAIN EQUIPMENT TRAINING COURSE APRIL 29th – MAY 3rd 2013, MADRID, SPAIN

  2. MAIN EQUIPMENT DESCRIPTION ARU IS EQUIPPED WITH THE FOLLOWING MAIN EQUIPMENT: • RICH AMINE FLASH DRUM • AMINE REGENERATOR • AMINE SUMP DRUM • STORAGE AND DELIVERY SECTION

  3. RICH AMINE FLASH DRUM MAIN FEATURES • Packed column on top of the drum • Internal skimming pot • Rich DEA solution • Blanketed with inert gas

  4. RICH AMINE FLASH DRUM MAIN PARAMETERS: • Pressure controlled • Amount of cold lean amine sent to scrubber (around 1.5 m3/h) • OPERATING CONDITIONS

  5. AMINE REGENERATOR MAIN FEATURES • Valve type trays • Chimney tray • Top section in SS • DEA solution • Internal skimming pot in the Reflux Drum

  6. AMINE REGENERATOR MAIN PARAMETERS: • Rich Amine / Steam ratio in the Reboiler • Acid Gas to SRU temperature = 55°C • Regenerator Reflux Drum pressure = 0.9 kg/cm2 g • Rich Amine to Regen. = 93 °C • Temperature of lean amine solution sent to Storage and delivery section (92°C) • Demi Water make-up to reflux drum MAIN LIMITATIONS • Amine degradation • Antifoam solution needed • OPERATING CONDITIONS

  7. AMINE SUMP DRUM MAIN FEATURES • Pure DEA loading facilities • Blanketed with inert gas • Installed inside pit

  8. AMINE SUMP DRUM • MAIN LIMITATIONS • Amine degradation • OPERATING CONDITIONS • Temperature: 55 °C • Pressure:0.1 kg/cm2 g

  9. STORAGE AND DELIVERY SECTION MAIN FEATURES • Blanketed with inert gas • Air louvers

  10. STORAGE AND DELIVERY SECTION MAIN PARAMETERS: • Temperature of lean amine solution sent to HCU Section (55°C) • Amount of amine sent to filtering system (around 15%) • Amount of cold lean amine sent to Scrubber on Rich Amine Flash Drum (around 1.5 m3/h) • OPERATING CONDITIONS MAIN LIMITATIONS • Amine degradation

  11. MAIN EQUIPMENT DESCRIPTION SWS IS EQUIPPED WITH THE FOLLOWING MAIN EQUIPMENT: • SOUR WATER FEED SURGE DRUM • SOUR WATER STRIPPER

  12. SOUR WATER FEED SURGE DRUM MAIN FEATURES • Internal skimming pot • Blanketed with inert gas

  13. SOUR WATER FEED SURGE DRUM MAIN PARAMETERS: • Pressure controlled • OPERATING CONDITIONS

  14. SOUR WATER STRIPPER MAIN FEATURES • Valve type trays • Chimney tray (top and bottom) • Top section in SS

  15. SOUR WATER STRIPPER MAIN PARAMETERS: • SW Acid Gas to SRU temperature = 85°C • Sour Water to Stripper = 84 °C • Temperature of pumparound return to Stripper = 65°C • Temperature of stripped water sent to HCU/DHT = 90°C • Temperature of stripped water sent to WWT = 40°C MAIN LIMITATIONS • Surface temperature of the acid gas line • OPERATING CONDITIONS

  16. RomeViale Castello della Magliana 7500148 - ItalyPh. +39 06 602161Fax +39 06 65793002info@tecnimontkt.it – www.tecnimontkt.it

  17. THANK YOU FOR THE ATTENTION

More Related